Respect to a guy that starts the day with top notch coffee. Little more pressure on that tamp would be good. You are a true pro, Thanks for sharing your talent.
Muy bien 👍 🎉🎉 gracias a Dios por este medio de video para poder ver y admirar tu buen trabajo lo cuál disfruto mucho Dios te bendiga mijo y te siga dando la habilidad y fortaleza para cada día Toda la gloria sea a nuestro Dios 🙏 🙌
Kneel down, stinger in one hand wedge in the other , tack the bottom side while adjusting the wedge at the same time.. Light the rod on one try. Now that is some serious skill!!!! You just have to proud of the results..
Thank you for a great video. You make it very easy to follow and understand. I have a few questions: What brand and size of the stinger, and what size of the rod in your rod box line-up? Thank you again, Gus.
Thank you man!! I'm using a Tweco TwecoTong 200 AMP Amp Electrode Holder.. I've been using a 200 amp for years.. it's small and i like it.. it gets hot when you are hot passing on the line, or when you're constantly caping on the line, but otherwise works great on fabing.. On my rod-box? In pipeline all you need it's 1/8 5p+ then 4.0mm pipeliners then 5.0mm pipeliners on the first three boxes.. then on the other two boxes I have 3/32 7018 and 1/8 7018 just in case you have to repair any machinery..
Yes, every time there's a new weld.. it has to be X-RAY.. It doesn't matter if you are using new or used fittings.. just make sure that the used fitting doesn't compromise you from doing a good weld..
@@JoseAlexander-i9o No Jose, la única barilla que necesita calenton es la 7018 y en este video nomas use la 5p+ para la penetracion y 8010 todo lo demas
I didn't go to any school.. To be honest, I recommend him to start straight into being a welder helper.. I had helpers that broke out as a pipe welder in a year working with me.. as a helper, he will learn more things out here in the field than in welding school.. don't get me wrong, school is good, but where you learn the most is in the actual work..
@@gustavojr841When I asked my welding friends what school I should go to they both said the same thing! School is good but if I work with them I will learn more and faster. So I am going to assist on my first job tomorrow!
I was watching you hang that stinger in your back pocket when I do that there's all kinds of shenanigans going on that thing will touch everything in the world is not supposed to
😄👍👍👍 At first, I used to arc everything man, but I just got so good on not to lol.. one or the other.. you stop putting that stinger behind your pocket or keep in mind that you have a dangerous stick that could arc the pipe.. There was one time that I arc the pipe in a test because I had the stinger in my rear pocket 🤦🏻♂️ I ended up fixing it behind the eyes of the inspector.. Just don't do it.. it's not safe 😄👍
Respect to a guy that starts the day with top notch coffee. Little more pressure on that tamp would be good.
You are a true pro, Thanks for sharing your talent.
Absolute welding perfection. Gus you truly are the man. God bless you and your family.
My respect to the quite ones. Thanks for showing us what you do!
Really cool rod storage Gus 😮😮❤❤
O love those early morning runs getting to work and starting before anyone else !!! You are a consummate pro my friend!!
Brilliant video
very good work Mister Gus !!!!!
Muy bien 👍 🎉🎉 gracias a Dios por este medio de video para poder ver y admirar tu buen trabajo lo cuál disfruto mucho Dios te bendiga mijo y te siga dando la habilidad y fortaleza para cada día
Toda la gloria sea a nuestro Dios 🙏 🙌
Gracias madre! ❤️❤️😘
I have to make me a cup after that intro. Lol
😄👍
This guy rocks!
Buenos videos amigo saludos desde zacatecas mexico
Happy to be able to sit over your shoulder to build more visual experience.
Kneel down, stinger in one hand wedge in the other , tack the bottom side while adjusting the wedge at the same time.. Light the rod on one try. Now that is some serious skill!!!! You just have to proud of the results..
Worked down in Hodds and Lovington area. Also welded pipe at Permiain Gas in Odessa in the early 80's.
Bon Boulo 😆😆👍👍
Thank you for a great video. You make it very easy to follow and understand. I have a few questions: What brand and size of the stinger, and what size of the rod in your rod box line-up? Thank you again, Gus.
Thank you man!! I'm using a Tweco TwecoTong 200 AMP Amp Electrode Holder.. I've been using a 200 amp for years.. it's small and i like it.. it gets hot when you are hot passing on the line, or when you're constantly caping on the line, but otherwise works great on fabing.. On my rod-box? In pipeline all you need it's 1/8 5p+ then 4.0mm pipeliners then 5.0mm pipeliners on the first three boxes.. then on the other two boxes I have 3/32 7018 and 1/8 7018 just in case you have to repair any machinery..
@@gustavojr841 Thank you for your info it really helps me out . God bless Gus .
Would love to here you explain your technique especially on getting such a stacked dimes look on your caps.
Thanks man. Maybe in the future, I'll try to say hi, at least 😅
Pretty fancy coffe machine there Gus😅😅😅😅
😄😄👍 Thank you man!
Do they shoot X-ray on spools that have used fittings?
Yes, every time there's a new weld.. it has to be X-RAY.. It doesn't matter if you are using new or used fittings.. just make sure that the used fitting doesn't compromise you from doing a good weld..
No usar termo para calentar los electrodos?
@@JoseAlexander-i9o No Jose, la única barilla que necesita calenton es la 7018 y en este video nomas use la 5p+ para la penetracion y 8010 todo lo demas
Nice home shop, what size wheels tires you running
Thanks man! They are 35 X 12.50 R 17
Gus, my son is graduating this year and he’s thinking about going into welding, what school did you attend for welding and what advice would you give?
I didn't go to any school.. To be honest, I recommend him to start straight into being a welder helper.. I had helpers that broke out as a pipe welder in a year working with me.. as a helper, he will learn more things out here in the field than in welding school.. don't get me wrong, school is good, but where you learn the most is in the actual work..
@@gustavojr841When I asked my welding friends what school I should go to they both said the same thing! School is good but if I work with them I will learn more and faster. So I am going to assist on my first job tomorrow!
Where did you get that hood from?
HE MAKES THEM
Yeah man 😉 I make them, as you can see on my previous videos.. thanks for watching
Where is your location where you are fabrication
Between Odessa and Andrews
I can be your helper💯🙏
😄 I wish we could get helpers on this job man..
@@gustavojr841I look up to you, really love your videos🙏💯
Hey brother I have Jack roller heads I’m trying to get out into the market get back at me so I can send you a pair.
Email me or message me on Instagram
@@gustavojr841 just PMed you brother.
I was watching you hang that stinger in your back pocket when I do that there's all kinds of shenanigans going on that thing will touch everything in the world is not supposed to
😄👍👍👍 At first, I used to arc everything man, but I just got so good on not to lol.. one or the other.. you stop putting that stinger behind your pocket or keep in mind that you have a dangerous stick that could arc the pipe.. There was one time that I arc the pipe in a test because I had the stinger in my rear pocket 🤦🏻♂️ I ended up fixing it behind the eyes of the inspector.. Just don't do it.. it's not safe 😄👍