Making a 50lb GIANT Warhammer!
Вставка
- Опубліковано 22 бер 2022
- This video is sponsored by Microsoft and PC Game Pass. To play games like Total War: WARHAMMER III on day one and over 100 great games, sign up for PC Game Pass today: www.xbox.com/en-US/xbox-game-...
OUR PRODUCTS: alecsteeleco.com/
INSTAGRAM: / alecsteele
ALECSTEELECO UA-cam: bit.ly/alecsteelecoYT
ALECSTEELECO INSTAGRAM: / alecsteeleco
LEARN BLACKSMITHING ONLINE: beginblacksmithing.com/
PATREON: / alecsteele
DISCORD CHANNEL: / discord
(Affiliate link):
The Rhino Cart Welding table is utterly incredible and an essential piece of fab equipment for your shop! Use code “forge” for 5% off: bit.ly/RhinoCartFORGE
MUSIC:
Epidemic Sound - goo.gl/iThmfx
- signing up at this link supports the show!
------------------------------------------------
AMAZON AFFILIATE LINKS TO GEAR I LIKE:
--------------
CAMERA + MAIN LENS: amzn.to/2CrLyYP
WIDE LENS: amzn.to/2CsAZou
TRIPOD: amzn.to/2GpBX7f
MIC: amzn.to/2CrBmiQ
SD CARD: amzn.to/2sF0i7g
COMPUTER: amzn.to/2C4i0oo
BEST HAND CREAM amzn.to/2Bz4tnL
LOTS OF SHARPIES: amzn.to/2CsDwyR
FAVOURITE PEN: amzn.to/2Ho4jQI
WELDING HOOD + POWERED RESPIRATOR: amzn.to/2ENWV2E
GRINDING HELMET + POWERED RESPIRATOR: amzn.to/2EKsSZI
GRINDING HELMET (works with both powered respirators, buy plenty disposable screen protectors): amzn.to/2F9aZRU
HALF MASK RESPIRATOR (BEST ON MARKET): amzn.to/2HoFqV9
FILTERS: amzn.to/2FaSLzp
EARMUFFS FOR HELMET: amzn.to/2Hq0IkT
GLOVES I LIKE TO GRIND IN: amzn.to/2HlsNdn
EARMUFFS: amzn.to/2Byqza0
---------------------------------------------------------
Instagrams:
Alec: @alecsteele
Will: @will_stelter
Jamie (editor): @jamie.popple
Isaiah (videographer): @isaiaharnoldfilm
/ alecsteele
INSTAGRAM @alecsteele
FACEBOOK PAGE / alecsteeleblacksmith
SNAPCHAT @ALEC-STEELE
My name is Alec Steele and I am a 21 year old blacksmith from Norfolk in the United Kingdom, now living in Montana in the USA! I upload a vlog from my day at the workshop almost every single day. Lots of sparks, lots of making, lots of fantastic-ness. Great to have you here following along!
What do I make? LOTS of Damascus steel, knives, swords, axes and more and of course, I always love hearing your suggestions for future projects in the comments below!
So if you want to see lots of forging fun, blacksmithing badassery, cinematic hammering and more in my Daily Vlog - please subscribe here by hitting that red button!
FACEBOOK PAGE / alecsteelebl. .
INSTAGRAM @alecsteele
SNAPCHAT @ALEC-STEELE
MUSIC - goo.gl/iThmfx signing up at this link supports the show!
SoundStripe - soundstripe.com?fpr=alec84
signing up at this link supports the show!
Alec Steele Blacksmith 2019 - Розваги
![Making Durin's War Hammer [The Rings of Power] LoTR](http://i.ytimg.com/vi/_HFjQwZRbZw/mqdefault.jpg)
After all the mechanical stuff you've made, I think a flip knife would be a great build.
*whispers* *seductively* "benchmade 42"
*whispers* *seductively* "benchmade 42"
Illegal in the UK!!!
@@willlatham7878 Well, I didn't say automatic or assisted... :Ρ Under 3 inches any manual folder is legal to carry and I don't think there is a restriction for home ownership.
Yesssss. A Swiss Army knife would be super cool too.
I can honestly say Jesse Cox / Alec Steele is one crossover I never would have guessed
I know right I did not expect that at all it's awesome.
They really crossed the streams with this one.
Unexpected, but amazing!
I know right? I was subscribed to both both never expected this crossover
Is Jesse Cox putting out a video on this?
Funny story you reminded me of: For many years I emptied hoarder homes and true story I happened to build a 100 pound sledgehammer that resembled a Thor's hammer toy my kid has-completely accidentally. So the story goes I drove the big truck and we threw away 5-10 tons every day of contents of homes, farms, barns, and businesses that had been foreclosed (seized) but had left large amounts of contents the banks had to have removed. We took everything, and a lot of it was collections of all manner of things and about 10% of everything ended up being scrap metal. We dumped a lot of trash in landfills, metal in scrapyards, and kept a lot too. This required us to break everything we could to fit the massive loads in my box truck. Well one of these houses (actually many) had this amateur fabrication shop and in the dusty forgotten corner of one I found a 12" x12" x 20" cube of steel with beveled edges and a hole in the center across the width. Obviously I kept it, but I rocked it in the back corner of the truck where I stored steel over 3" thick that I kept for me personally. One day I found a solid steel bar about 5ft long that was the exact diameter of the hole in said giant block of steel; and I instantly knew what had to be done. I stood on the truck and the guys helped me on the ground by holding the bar in position and we bashed the tight fitting solid pipe and block with our biggest sledge into a seamless non welded "world's largest sledgehammer" as we christened it. It was so heavy that over the years as we burned through over 100 guys on my crews, only 1 guy could swing it. His name was Josh, and he was built like the green hulk and was a round faced country boy with a literal chip on his shoulder, he was the most powerful physical human being I've ever encountered. The strength and other "competitions" we came up with on the job were always fun-especially in that time and particular type of work where demolition and destruction was a daily requirement-but this guy literally destroyed everyone at every single thing x 10 usually 😆. I still remember him swinging that 100lb sledge at dressers, chests, walls, floors, metal desks, even a car. Those were the times of my working life, but now I'm old. Thank you for joining me for a little while on memory lane.
Thankyou for sharing dude, I actually really enjoyed that story. Sounds like a good time!
Josh was worthy
"Big Lad Josh" was a user i encountered while playing games with my friends, this sounds like the kind of guy i imagined.
@@Sualin Funny story: he was much younger than me and played a game called FInal Fantasy online 11.. and talked me into playing it-I subsequently went through a severe downward spiral of addiction to that game for 9 months. I actually quit playing online and all games basically because of it 😆
Probably just get deleted but I made a ton of videos back then and have them on my channel on a playlist called "Extreme Hoarder cleanup to music" or something like that... They unfortunately were made using my "hat cam" and ancient cellphone cameras 😆
I really love the way you show You're errors and failures not just the perfect scenes
I like the light irony of the phrase "you're errors"
The grammar nazis are still here in 2022
@@gorpazorp7309 Grammar Nazi? Ah yes. I remember that famous line at the Nuremburg address, when Hitler said "I like those Jews."
@@MrJimmyWalsh hehe sorry if it's wrong but I won't change it cause of my statement and it's the autocorrects fault
@@BEAST-ot2tu hey there's nothing to apologize for. I was just saying I enjoy the irony :P
When "breaking" a silver solder joint that long, you don't, you heat it back up and pull it apart while under fire. I would've used some wire to twist around it to keep it from opening up, or some third hands to keep it from moving. You worked through the problem well though! I really suggest taking a jewelry class that focuses on copper and brass work if you keep working in those materials. They don't work at all like steel.
I would like to know how long he came to using the silver solder in a syringe. I know plenty of guys who felt stupid for doing years of work before thinking about it.
@@neithertwosturrr3016 I wonder what the melting point of his original solder was. We classify them as hard, medium, and soft to denote how easy they are to melt. He might've need a soft and been using a hard.
@@Kate_Fyria he was probably just using whatever he had laying around. I doubt he would be used to the difference being he mainly uses steel/aluminum. Also did you see how cranked that torch was?
@@neithertwosturrr3016 that’s what I saw. That was so much heat.
@@neithertwosturrr3016 yeah! Way too big and hot too solder with! No wonder he was melting it!
I want to see Alec remake something he made years ago but with all the skills and knowledge he has now. Like the samurai or fall dagger.
*A 50 pound hollow box? Somewhere out there, a bearded crazy person that answers to Micheal Cthulhu is likely bashing his head against a boulder and vomiting blood and cursing the gods between sips of tea.*
My dream is to have Alec build the Volendrung from Skyrim. That would be sick and I bet nearly impossible!
Something I never noticed but that hammer is named after the hammer Hrothgar uses in Eragon, and styled after it too, it's cool that the ES series took inspiration from current fantasy works and wanted to credit it. :)
@@PapaBear_Gaming but its not named after the one in Eragon.. Volendrung dates back to 1995 and wheres Volund dates to 2002-2011
@@xentionX are you able to direct me to a source? I don't see that being the case when I googled it
the only reference to 1995 being that the elder scrolls wiki is that old
@@PapaBear_Gaming The Elder Scrolls: Arena. Release date: 1994.
So its even before 1995 :)
@@PapaBear_Gaming other way around, tes is. Let than eragon by a substantial margin
Little bit of advice, learned through bitter experience and countless disasters, when you’re doing a big silver soldering job with multiple runs of solder use different grades of silver solder by grades I mean the percentage of silver in the solder sticks varies and with it the melting point. The lower the percentage of silver the higher the melting point the higher the percentage of silver the lower the melting point. So for a job like this start with a higher melting point with lower percentage of silver say 18 or 24% with a high melting point and work your way up the percentage of silver in steps with last one being the lowest melting point at 55% silver. The difference in melting point means it won’t disturb any existing joints. Use copious amounts of silver soldering flux like Easy flo or Tenacity 5 especially the latter for prolonged heatings as it has a much longer life than Easy Flo and keep periodically adding it to existing joints. Also ease off with the torch flame to a really soft or carburising flame (excessive fuel gas) its easier to control the amount of heat put into the work piece and direct the solder where you want it flow
Love the channel content and the enthusiasm for your craft 👌👌👌
That's amazing! Can we get a copy 😂
It might actually look fairly normal in proportion with you guys...
A weapon fit for giants
OMG FIRST ALEC STEELE AND JESSE COX AND NOW THE STOLTMANS ARE IN THE COMMENTS?!?
if anyone needs a hammer this size its defiantly you guys..... i'll take a little one though!
You guys would one hand that thing LOL. Can someone say dual wield!?
As a metalhead, i gotta say, the music you use is so badass, very fitting for when your beating things with a hammer lol
I agree. Fellow metal head. I just love how industrial and raw it fits. And then the clean vocals on top give it an ethereal feel.
@@richardmchale3097hell yeah
Jamie, the shot of the welder close up in slow mo was *exquisite*.
Looks amazing! Only thing I would have done differently (I mean, other than making it altogether, cause... you know... I'm no blacksmith) is that I would have filled the void in the head with an expanding foam or epoxy, something to deaden the hollow noise.
I can only imagine Alec at Halloween or a convention: authentic forged weapon and shield... plastic armor from a bargain bin knight's costume.
most places dont allow live steel tho. he wouldnt even be able to get through the door let alone bring forged items lol
You're a scientist, mechanic, mathematician, teacher, and so much more. You're awesome. A real 🐐 of the industry.
Always good that the description still ends with "Alec Steele Blacksmith 2019". Never lets me down
Alec, some things about soldering brass. First off, you appear to be using an oxy torch as heat source which is far to powerful for both the solder and the material you are using. A medium sized blow torch would be much better. Brass has a very high thermal conductivity ratio which is why everything was melting. Secondly, jewelers solder was the better choice as silver solder is really more designed for soldering copper to brass in plumbing and in small steam boilers. Great work though!
I’m pretty sure he only has a propane/oxy torch in his UK shop
Agreed. Propane would have been a better choice. It only burns at 2000 C. Oxy acetylene burns at 3600 C. Much less aggressive for materials with lower melting points.
I feel like the 1week making time was the limit for all the improvement Alec could have made
@@terdfergeson23 Nope 07:00
He may have also been more successful using a reducing flame I don't remember what the type oxycutting uses is called but it is hotter and he was also using a hotter section of the flame.
something I learned in jewelry class was when making an assembly it is important to use different grades of silver solder for different steps in the process so that the later soldering steps don't need to get hot enough to melt the solder from the previous steps.
Jesse Cox and Alec Steele is the collaboration i didn't know I needed!! How amazing is this!
The music really goes with the video.
amazing work guys.
Master Jamie delivers as always:)
@@edkovac8978 yeah he is the best.
You did well assembling the brass parts, and I think you learned why generations of smiths have cast it
Silver solder comes in different grades. High temp to low temp. You start with the high temp on the first joints making your way down the grades for following joins. Meaning subsequent heats wont unstick your first joints. Flux is also your friend when using silver solder rods, it allows solder to flow and helps prevent oxidation. Also also you're using too much heat, use a much smaller blow torch. 😀
Awesome build! Microsoft should hire you to do game replicas for special events and other stuff!
Well, I don't know, he's pretty good but there are actual prop builders that would probably do the weathering a bit better.
At 3:15 the brass was annealed from the heat, making it really soft and bendable
Looks like a fun little project that one, I love the texturing and aging of new metals to get that battered effect.
Two videos in a week?!? Yes! Aleck, thank you!
Hey Alec
I have been watching you since, your first wooden, shed, workshop, back in England.
I just want to say, that I appreciate you and what you do and go through to make this content for us :)
Awesome job fabbing something that cool that fast! Jesse is a long-time fave of mine and a right good egg in the game reviewing / gaming infosphere, I've been following his stuff from way back in the days of Co-Optional Podcast. He also does a daily(ish?) 5-minute gaming news segment nowadays.
I'm sure he'll be absolutely thrilled to smash open the loot with that massive meat tenderizer you made!
Super cool! I would love to see some more ridiculous fantasy builds in the future aswell!
It's amazing how faithfully you captured the look of a video game object. It looks like it was shaded in a render engine. Nicely done!
Man you are so amazing. The first part where you were soldering everything is just a masterpiece. The music fits perfectly with your editing style. Its been a pleasure watching your video!
I’ve been dealing with soldering brass and copper and trying silver solder for about 4 months before I found out about silver solder in a syringe, it’s a life saver
I suggest cleaning steel before welding. And using pusle mode for welding. Less mess and easy grinding
And use soldering/ welding tips. They give you a lot more focused heat control. An acetylene plumber's torch works great.
FYI Alec you can braze brass and bronze and even cast iron. Which is essentially what you're doing. Instead of using a TIG torch you use oxy acetylene or oxy propane. I'm a welder/fabricator for a living. Let me know if you have any questions.
What an epic build! So impressive to see Alec match the rendering so accurately 🤯 skills !
"get some successful joints"
I'm in!
Jamie is always coming in clutch with those b-roll shots. Definitely keep him around!
Tig welding brass is signifigantly easier with more preflow and the right gas both are very important as the stuff is stupidly easy to contaminate by heating without enough shield gas. You can also heat too much and burn zinc out if your mix has any in it. Brass is quite a pesky material but fun to weld once you get the setup right. Bronze filler was absolutely the right option here. As for the jewelry silver solder it tends to let go all at once when you heat up the base metal enough to melt the entire edge when it's not clamped and brass having a lot of copper has a tendancy to spread heat like that. Try adding a large mass of heatsink metal between the flame and anywhere you dont want melting. I use a copper half inch plate or quarter inch plate when i need to do that.
Key to noticing this if there is any soot you didn't shield properly. If there is yellow dust you are burning zinc. Since your weld had black around it there had to be a shielding gas issue.
Wooow! That's a beast of a war hammer! Turned out epically beautiful as well. Great work from a great craftsman! I thoroughly enjoyed watching you work through all the challenges. Any gamer would love to display that in their game room!
I hope the connection between the handle and the head holds up. When I saw the holes in the top and bottom I assumed it would go all the way through, but like that the connection is going to have a ton of moment on it. Good luck.
The detail work is really well done.
Something about this videos videography and editing really hits the bulls eye! Nice one guys!
That was awesome, I love seeing all the challenges you face working with different materials. With the world we live in being full of items of many different materials you don't appreciate just how hard it can be to work with some materials.
Awesome video and great work ! I am really digging the music during the final display of your work!
1 week? That's a pretty tight timeline.
The weathering on the fantasy hammer was AWESOME!!
I absolutely love the way he matches his montages with the music!!!
AMAZING job! That is awesome, an absolute stunner of a piece! I also love the music on the background - epic!
You did an absolutely amazing job with this! Looks fantastic!
Wow. That looks amazing Alec. I can’t wait to see him smash that huge rock. Well done.
Bro I haven’t watched you in years I’m so glad I found you again 😭😭😭
It’s cool to see you back at your dads wood shop using the lathe! Brings back memories of some old videos!!
Not the corssover we ever knew we wanted.... but we are very happpy it came
Jesse was the very first youtuber I ever subscribed to, and this is exactly what I would expect him to commission from Alec
You're honestly just captivating when it comes to your creative process, keep honing your amazing skills and techniques to thee finest edge!!!
4:52 so a 'o' shape?
man that spike is pog
You should ABSOLUTELY have his channel link in the description for a request vid like this…
I half expected Alex to just run away while the video call was still on, to get the materials.
I’m an amateur jeweler and I find it really helpful to hold things I’m trying to solder together with some steel wire. It hold its shape pretty well and doesn’t melt so for me it works very well
Next time you want to make something that looks like brass, a suggestion I have is maybe you can use thin steel and then use a brass wire wheel on a rotary tool to color it like brass. It's a technique I have seen on a few channels and it works great.
Awesome video. As for the solder issue - as others have likely stated, there was just too much heat, both direct and residual. even after the solder had melted and spread out it was far too hot to freeze before the joints just gave way. Indirect heat and a small blow torch work best for it typically.
I think you need a much tighter flame and do smaller brazes, it's like welding with solder. It's not meant to take wide flames. Also the fact that you're not using the same material as the base means you're not getting a true fuse, just a soldered joint. Think of like soldering joints of copper, unless it's copper-based solder then when it heats up it will start moving.
Absolutely amazing as always, you'll be getting orders for movie props soon 👌 knocked it out of the park!
More of this please. Brilliant work👏🏻👏🏻
Finally...A PROPPER HAMMER!!! (channeling my inner Gimli)
Hard, medium, and soft solder, Alex. Start with hard solder (melts at a higher temp), then flow medium, and finally soft, which melts at the lowest temp.
That looked like a really fun project
Alec great work. Jamie, that b roll and music at the end of the video was stunning! It really showed off Alec’s talent
If a man at arms; reforged episode was all done by one person. Looks great!
This is a very, very, very nice project and a great work!! Congratulations!!
The crossover we didn't know we needed. Love Jesse.
Actually reminded me of a dwarven battle hammer. The look , style and was absolutely brilliant. The only thing missing was some runes etched on the head but hey bloody brilliant
looks amazing you should do projects like this more often loved it
Jewelers have the same problem when soldering. The solution is to use different temp solder. Start with high temp solder and work your way down to low temp solder.
The transistion at 7:47 is fire !
It would be interesting to see you attemp a canister Damascus using the shavings from the brass collar for the handle.
Possibly using shavings from copper?
Looks amazing,a true craftsman at work
I was very pleasantly surprised to see Alec doing some woodturning haha
I didn't expect it to be so beautiful
I love music like this in your videos, it really pairs well
What an awesome piece of craftsmanship!!!
How well does that wood handle hold up if you hit something solid though? Seems like it would immediately snap at the connection :(
I honestly never thought we’d see an Alec Steele/Jesse Cox crossover
Jesse Cox.....now that is a blast from the past.....One of the very very first people i ever subscribed to on youtube. Must've been 10 years ago since I watched anything from him.
Looks amazing, great finish and patina. Good try with the hard solder. I will note to TIG braze if I need multiple parts. I hope its not a repeat of Adam-savage's hammer, made the handle too thin. Great video.
One of my favorite gamers and my favorite blacksmith.
I hope there is a video posted showing it being used to get at the loot.
Yeah, if a solder joint is done well, the joined material will break before the join will (even if it is annealed brass). You could have reheated/liquified the solder seam but given the time pressure, beanding/beating it into place was the best route. The pain of soldering large/thick bits of any metal is that they hold heat for so long that the heat from working on a "cold" section can travel to a completed section and loosen (or separate) the finished sections. A prof I worked under had a class use solder on steel "because it's the same principle as welding" (despite being told, no, no it is not) then wondered why the class was burning through solder (which the program supplied from material costs) to the point that he had to pump the students for more material costs to buy more solder.
Those projects were more solder than steel at the end.
As a Warhammer fantasy fan I'm surprised you didn't go with the iconic "Hammer of Sigmar" though admittedly, it's a bit plain. Awesome result nonetheless!
As a Canadian..finishing off the handle with hockey tape was a nice touch 😂
Man at Arms: Alec Steele edition. Awesome video man!
Ok this was a bit more fantastic than normal haha I love this thing
Brazing 101, do not use a rosebud torch as your heat source. Use a number 1 or 2 brazing tip. Also, when brazing brass or copper, keep the item in a water bath for heat control since they are both a heat conductors. (Keep the welding area out of the water while submersing the remaining body).
Loved the music choice for this video, didn't expect a cox today
When silver soldering, warm up the whole thing to just below the melting point of the SS and use a localized torch with a small flame to actually solder.
Also if you had used Monel or silicon bronze instead of brass then you could have TIG welded it with ease and it is a lot stronger.
I love how you successfully made a piece of steel and brass look like a foam cosplay prop with all the cartoony weathering. Super successful build, just ironic after personally spending tons of time trying to make foam props look like brass and steel.
Alec I dare you to make a sword without any power tools
Looks awesome though and I’m sure playing with the brass plate was a great learning experience.
Im a jeweler and for items that have multiple pieces that need soldering together we use different grade solders, like easy, med, hard all with slightly different melting points. You'd start with hard (highest melting temp) then work down never getting the peice as hot as the previous section. oooooorrrrrr can use clay to holder it together while doing them all at once (is fiddly to set up but less so than having pieces fall apart hahaha) hope this helps for next time.
Good story telling & great pace 😀
Was not expecting to see Jessie Cox on this channel ever really. A welcomed surprise.