Deverias tener a la mano un recipiente con agua y una esponja mientras lijas, porque supongo qué todo el tiempo dejaste correr el agua.. ahi te encargo ese pequeñisimo detalle por favor..
Es un buen trabajo. Ya hice muchos pulidos de aluminio en mis motos Honda. Parece cromo. Pero si no le pone unas manos de laca no dura nada. Enseguida vuelve a ser opaco
Hello ... Your work is very beautiful ... But I did not recognize the paint that you put in at the beginning to remove the rust ??? what is his name ?? What does it consist of ??? Thank you very much
Yes, and just go slow, so you won’t get too much deep scratches, better to take longer with finer sandpaper, than to take forever to take out deep scratches. Okay
Pozdrav.Kada se felga ovako ispolira lepo izgleda ali se posle mora polirati jako često da ostane sjaj.Ja sam polirao Gsxr sa USA Mothers pastom i posle kiše ponovo i ponovo poliranje.Ali dobro izgleda.pozdrav mr.turbo
Matte chrome akan tetlihat lebih keren daripada glossy. Glossy chrome tinggal lapis pake matte clear seusap aja jadi. Jangan terlalu tebal lapis clearnya sebab nanti bisa jadi matte silver.
Grade 800 /600 /1200 wet and dry and i think he uses nitro morse to remove laquer and paint. At the begining not 100 % sure of that though it seemed to behave the same way as nitromorse does
Oh no, please polish the cap or get a chrome plastic cap. That cap ruins the look! Great vlog, I do that too, makes the black wheels look bad or not attractive. You just can’t take a black Chevy Suburban with black wheels and tires to be stealthy, even if it is OBIDEN!
![[Wheel mirror polishing] The ultra-luxury RAYS VOLK RACING TE37 TTA is mirror-finished.](http://i.ytimg.com/vi/oeERpfBq40s/mqdefault.jpg)
![[Wheel mirror polishing] The ultra-luxury RAYS VOLK RACING TE37 TTA is mirror-finished.](/img/tr.png)
![[Wheel mirror finish] Suzuki Jimny genuine iron wheel was mirror finished, it became a plated wheel](http://i.ytimg.com/vi/5BJRwIw9AQc/mqdefault.jpg)
鏡面仕上げは焦る気持ちを抑えて、粗めからゆっくり番目を上げていく根気がいる作業ですね。どうしても速く仕上げたくて、電動工具でコンパウンド使ってしまい曇ってしまう。素晴らしいです。
Parabéns bom trabalho .(Brasil )
Pure labor. Outstanding job.👏🏽
名車再生の番組だといろんな機器で磨くが、手作業で綺麗にできるなら
根性だけは必要です。
幾重にも手間暇かけて凄く大変だと思いますが、センタ－キャップはそのままなんでしょうか。それから袋ナットの方が断然締まると思うのですが。
車を屋外に出して、タイヤ交換した側を披露して欲しかった！前輪の鏡面ホイールタイヤと後輪のそのままホイールタイヤを見比べたいのです！
めちゃくちゃかっこいいです！
同じ要領で2代目インサイト前期の16インチアルミなんかポリッシュしてフィットやシビックあたりに履かせたらかっこよさそうですね！
クリア吹くと曇っちゃうし週おきに磨くのもめんどくさいし...めちゃくちゃカッコいいですが完成したあとも色々大変ですよね
Without paint, how is the wheel protected from the elements?
アルミの皮膜削り落としたならクリア吹かないと
表面が腐食してしまって輝きを維持できませんよ
ハヤシレーシング等
削りっぱなしの市販アルミもありますよ
クリア入れると風合い変わっちゃうってんで
クリア吹いてもしばらくしたら劣化してミミズ状になりますね
そうなるとまた剥離、磨きの手間が
アルミの地肌むき出しなら、たまに磨いてやればそれなりには維持できますね
どちらをとるか･･･
ということはこの動画で完成したアルミホイールは時間が立つにつれて腐食が進むということですか？
それを防ぐにはクリアを吹くということしか対策はできませんか？
クリア塗装も焼きつけしないと
1年程度で剥離してくるので、微妙ですね
@@025-k6g クリアコートしてもいずれ白サビは発生しますね それがどれくらいの期間かは予想できませんが
それにせっかく鏡面にしてもクリアを吹くと、鏡面具合がボケます 美しさだけ見れば、鏡面仕上げのままの方がきれいですね 定期的に磨き上げる手間をかけられるなら、むき出しのほうが綺麗です
一度鏡面にしてしまえば、たいした手間なく磨くことはできます
El trabajo que haces es un arte un don que te dieron.... Buen trabajo.... Saludos
@@josemanuelgarciamarquez2523 "removedor de pintura" es un químico para quitar la pintura
Beautiful video bro. How long time you take to finish each wheel ?
Great job I was going to do only the lip but now I think the whole wheel. 89 honda crx si
Wheels look amazing!! What grit sand paper was used and also sanding disc??
Apik cuma rodok suwi
@@ASTINAOTOART wkwkwkwk
how long did you leave the stripper working on the wheel sir?
Excelente trabajo pero se ve que ocupas muchas lijas amigo ...
Blimey wonderful job , hard work and a lot of time but the results speak for themselves ...nice one 👍
綺麗になっていくのが気持ちいい、スッキリした❗
スケルトンはどこで買えますか？
polishing is temperally.chrome is the best.
Not a big fan of the mirror finish but respect the amount of work that went into these. Was a clear coat used to protect the finish?
How are you going to get clear coat to stick to polished smooth like glass aluminum?
From Malaysia,good video👍
Mantap
Well done...👍
クリア塗らないとすぐサビとくすみがでそう
Beautiful work of art
これだけ鏡面にすると酸化で瞬く間に曇りが目立ちそうですね。アルマイト等の酸化被膜で保護はしないのですか？
It adds value to the Honda, being that it is chrome, it adds a touch of elegance,👍👍👍👍👍👌👌👌👌
What car do those wheels come on I like the style of that wheel also what size are they and what bolt pattern please
Boa noite! Gostei muito do seu trabalho, show de bola!
What is the stuff that got put on the rim
剥離材かぁ？
出来るんだぁ
倉庫にあるか、やってみよう❗
The great work in undone due to the cap still being old.
Just replaced with new cap
This is how all of their rims should be stock.
あれ?クリアーはしないんですか?せっかく磨いたのに。
あえてクリアをふかんとよ
今回はアルミはホイールだからでは？
鉄は錆びて色変わるけど、アルミの酸化物は薄い皮膜みたいで色変わりにくいからだと思いますよ。
この材質はAl-Si-Mg系でしょうから白錆出るでしょうね
クリアー吹いておいた方が白くくすまなくなりますね
手間暇かけて最後は袋ナット使わんのかーいってツッコミしちゃいましたw
That's way to much work. Should have just put in a little over time at work and bought some new wheels...
Harbiden cok güzel oldu eline sağlık kardeşim..
What does he use to remove the paint?
I would like to know also?
@@RetiredVet_life Right! Aircraft strippers don't work on wheels like this stuff. Especially Volk with an anodized lip.
All that hard work wasted because there's no clear Laquer to protect that nice finish... Will be corroded in no time.
Ok thanks! Reason I asked because it didn’t look like any paint remover I’d ever seen
What's the product Called ?
請問鏡面拋光後，日常要如何保養維持亮面呢？
What's the blue goop at the start?
Deverias tener a la mano un recipiente con agua y una esponja mientras lijas, porque supongo qué todo el tiempo dejaste correr el agua.. ahi te encargo ese pequeñisimo detalle por favor..
Nice work
Whole day for one wheel..maybe a week for one wheel😱🥱
What’s the wheels specs? From what Honda? They look good.
Es un buen trabajo. Ya hice muchos pulidos de aluminio en mis motos Honda. Parece cromo. Pero si no le pone unas manos de laca no dura nada. Enseguida vuelve a ser opaco
si van pintados van con primer , esmalte , luego barniz para que duren.
good job
Hello ... Your work is very beautiful ... But I did not recognize the paint that you put in at the beginning to remove the rust ??? what is his name ?? What does it consist of ??? Thank you very much
Very nice 👍.
最初の一本は楽しい 残りは…
やっぱやってないっぽい
途中からやっぱりやめとけばよかったってなるよね。
Was this wheels aluminum alloy? I have a set of FD3S wheels 16x8 that i want to refinish
Yes, and just go slow, so you won’t get too much deep scratches, better to take longer with finer sandpaper, than to take forever to take out deep scratches. Okay
Pozdrav.Kada se felga ovako ispolira lepo izgleda ali se posle mora polirati jako često da ostane sjaj.Ja sam polirao Gsxr sa USA Mothers pastom i posle kiše ponovo i ponovo poliranje.Ali dobro izgleda.pozdrav mr.turbo
Nice wheels.
Bad brakes (rear drums)......
What is the blue liquid you used in the beginning to get all the paint off?
Aircraft paint remover
Matte chrome akan tetlihat lebih keren daripada glossy. Glossy chrome tinggal lapis pake matte clear seusap aja jadi. Jangan terlalu tebal lapis clearnya sebab nanti bisa jadi matte silver.
Que productos son los que utilizaron de favor (español). Gracias.
no respondio tu mensaje
Si yo tambien tengo duda de que es el producto azul del principio pareve removedor de barniz o pintura creo???
What remover do you use and what number of sand paper do you start with and end with?
Grade 800 /600 /1200 wet and dry and i think he uses nitro morse to remove laquer and paint. At the begining not 100 % sure of that though it seemed to behave the same way as nitromorse does
The stripper is called Natoko Skeleton M-201. It is available in Japan. Seems expensive to have shipped to US.
Should probably have them chromed to eliminate corrosion over time.
タイトルが｢腐ったアホンダラ｣に見えた。
俺の目が腐ってたようです。
アルミの質感がたまらんなぁ
11secs in only and 2 ads show up, ffs UA-cam give it up. Put one at the start and one at the end at least
Complimenti bravissimo!!!!!
العمل المرهق
Well what is the product
What name of this gel
Used first of all
What was the first product applied?
やりがいありっ🙆
格好いいっ🙆
でも、超～っ邪魔くさい😱😱😱
what blue product is that you use?
complimenti per il buon risultato e la tenacia, ma se fai il conto delle ore ........
What is the name of that blue chemical that you use?
Looking good 😯👍🏽👍🏽
Oh no, please polish the cap or get a chrome plastic cap. That cap ruins the look! Great vlog, I do that too, makes the black wheels look bad or not attractive. You just can’t take a black Chevy Suburban with black wheels and tires to be stealthy, even if it is OBIDEN!
Не закрытый алюминий очень быстро покроется коррозией
Ему все равно делать нефиг, ещё раз полирнет)
Откуда коррозия на цветмете?
@@СтепанЦайзер от влаги, это называется окисление, большинство цветных металлов подверженны этому процессу, в том числе и нержавейка!
What's the ne of the first chemical do you use
What was the gel stuff used in the video
あと３つ頑張ってください！！（鬼畜）
What do it cost to get a set of rims done like that
ما هي مادة التنظيف
ولك جزيل الشكر
what was that blue chemical?
Lindo..
1000👍
What’s what do you use ????
What's the blue liquid?
That's to much work just to make them look good😏
donde puedo comprar el quimico que usas??? como se llama....excelen
te trabajo
金属ブラシの音がいい
Honda KB1 Legend wheel next?
次回はホイール全体を白にしてホンダのロゴを赤でtype R仕様にしてほしいです。
これなら新しいの買おう・・・
primeira chuva fica pior do que quando estava pintado kkk
Atep buwo gak duwe duwit
Nice
What’s the stuff used to take paint off with
Its call, paint remover. It is some sort of chemical. Just go to your local hardware shop or paint shop. They usually sell it there.
I think he used nitromorse as it reacts the same way
احب صوت الصاروخ راءع😂
ما أسم هذا المنتج و كيف يصل إلى بلادنا العربية و كم سعره للدولار الامريكي
Salam
В России этот вариант не пройдет, у нас зимой дороги поливают реагентом от него все ржавеет без краски😊
How much does it cost to end up doing this to 4 wheels from a pick up truck please comment back thank you
Хотелось бы увидеть что можно сделать с оригинальным литьём r16 Toyota prius 20...
Will look like shitte after a month .. need 2k etch clear laquer .... to protect wheels
Супер 👍👍👍
こんな、面倒なホイール磨きやってられないね、簡単に磨ける方法を動画でupして貰いたいね
金出して頼めよ
いやなら見んな
今後は、見ないわ、
請問這東西要如何購買