BACK to BACK REVIVAL for these TWO HOLDEN UTES will they run again?
Вставка
- Опубліковано 29 січ 2023
- Hello and welcome
i picked up this pair of old holden Utes locally from me, both very rough cars that look like they’ve lived a life or ten. Can I get them running and driving again? Watch and find out.
Cheers Jake - Авто та транспорт
Old holdens never die. They run forever ❤.
My first car was a hj kingy in 1979... If the gear selector rubbers ( near the firewall ) are worn they will cause all sorts of grief. Nice to see you bringing them back to life
When you pour fuel down the carb , you need to open the throttle to start, because its actually flooded. Better idea is to pour it through the breather tube and fill the carby bowl. And it wont run properly until the lifters fill with oil
186 great motor, you did well do get them going. 👍
Aren’t they. The more it ran the better it got. Not sure if the mic picked up all the lifter chatter and bearing noise when I first cranked it. But it wasn’t good at all
the sound of the holden six, music to my ears.
Like a Swiss watch!
The engine in the HQ sounds good, carby needs blowing out and kitted
These older classics are soooo good, Best of luck with it, I'm based in Melbourne and drive a HJ Wagon, hope to cross paths one day, Cheers..
Cheers mate appreciate it. I’ve got a hj wagon on the go in my other videos. We might cross paths one day!
Go the mighty 6 banger. Cant beat em. Love your vids Bro.
Frozen clutch no problem , just start it in gear, it will soon release itself, but you would need to be able to start it from within the cabin.
My trigger to start it reaches so I can tuck it under the driver side wiper so I tuck it in there and lean out and start it. Driving it without the clutch wasn’t the problem it was the stopping part. If it had a clutch I would of worked on the brakes somewhat. But both those problems combined and the other car, I called it a day with this one.
@@V8JakeC Do you have a handbrake ? . Possible it wouldnt have started in gear anyway if the brakes are locked on.
Handbrakes with these old things in this shape have only resulted in two instances for me in the past. Either the brakes lock on, or it does nothing. I find it best to not wake snakes in that situation.
I did bump the ignition with it in gear to see if it would move in gear ( off camera ) I dare say if I jacked up the rear and hit the button it would of started in gear.
F#@k yea mate hope to see more vid plz
hi just found your channel ,glad i did love get it run videos and by the looks you have a good range of old aussie car to just that ,will be waiting for the next video
Cheers mate I enjoy making these style videos. I hope to make a lot more in the time to come as long as I can keep finding them.
You’ll like BackShed he does this aswell give him a sus
He’s sure got the knack for finding the good ones!
@ 8:45 mark... I can only think of the Mad Max crew that was out to kill Mel and family. Bikers will show up soon to claim their car. Good on ya Mate! from the US.
Been watching vice grip garage myself. Love to see you drive couple hundred miles in a reviver lol. You blokes buy an old Holden wreckers or something? Seems to be H series Holdens everywhere there😀👍
Don’t mind a bit of vgg but more of a junkyard digs fan! Me too. Unfortunately are laws aren’t as lenient as the US as far as rego goes. Never bought a wreckers. This is just from years and years of doing what you saw in the video. Just never thought about filming it 😂
“Nobody with a good car needs to be justified.”
The 1st ute. Was the gearbox linkage jammed? They were mongrels for that
Yes they are. Unfortunately for me it wasn’t the issue. This would go in and out of gear with ease when the engine wasn’t running. When it was running and clutch in it just as the gear should engage there was a huge resistance on the shifter. Clutch gone.
I'm thinking worn gear linkages on the 202. It's an easy check
Wish it was that easy. Car would go in and out of gear with ease without the car running.
@@V8JakeC Got it
Is that hammer available at Total Tools?
That’s my own personal patent on that one 😂
Jesus Christ my fucken ear!