How To Remove A 2009 - 2021 Dodge Ram Spare Tire - Jack Removal Location - Change Flat Tire
Вставка
- Опубліковано 25 лют 2021
- A quick video tutorial on how to remove the spare tire from a 2009 - 2021 Dodge Ram.
More automotive DIY information available at www.ProgramYourRemote.com/
Where is the spare tire located on a 2009 - 2021 Dodge Ram?
The spare tire is located underneath the bed of the Ram. You will first need to remove the tools located under the front passenger seat in order to remove the spare tire.
Removing The Spare Tire
1. Remove the spare tire before attempting to jack up the truck. Attach the lug wrench to the extension tubes with the curved angle facing away from the vehicle.
2. Remove the protective cover over the access hole for the winch mechanism by sliding the cover upward.
Access Hole Cover Location
After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid acceleration or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
3. Insert the extension tube through the access hole between the lower tailgate and the top of the bumper and into the winch mechanism tube.
4. Rotate the lug wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
Rotating The Lug Wrench Handle
5. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer.
Pulling The Spare Tire Out
6. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of the cable.
Gaining Access To The Retainer
7. Pull the retainer through the center of the spare tire wheel.
This video will show you the location of and how to remove the spare tire on the following Dodge models:
2009 Dodge Ram
2010 Dodge Ram
2011 Dodge Ram
2012 Dodge Ram
2013 Dodge Ram
2014 Dodge Ram
2015 Dodge Ram
2016 Dodge Ram
2017 Dodge Ram
2018 Dodge Ram
2019 Dodge Ram
2020 Dodge Ram
2021 Dodge Ram
Find a Locksmith in your area with www.LocateALocksmith.com - Авто та транспорт
I feel like videos like this should be shown to every person buying a new vehicle. Thanks.
You’re Welcome!
Every time I buy a new vehicle, the first thing I do is drive straight home and learn how to jack up and change the tire. NO two vehicles were ever the same. The worst is the MINI Cooper. It's a pain in butt trying to align the pad with the jacking points on the car. VW makes it easier: just line it up with the vertical fence under the chassis and up it goes.
I am a first time Dodge owner getting ready for our first road trip. This was on my mind to be prepared and know how to do it with this truck for peace of mind before heading out. Fantastic!!!!! Thank you SO much!!
You're Welcome! Glad it helped
Dude! You are awesome for posting this. Bought my truck new in 2017, and never gave much thought to having to change a flat. At 63 years of age, I have changed so many I assumed it would be straight forward when the time came. So naturally went to the owner’s manual and it was useless for really explaining the lowering of the spare. The key points you provided were inserting the flared end at an angle and turning that bracket 90 degrees. No mention of either in the manual. Seriously, people like yourself restore my faith in humanity. Many thanks!
You're Welcome! Glad it helped
Have a 2017 Ram and the same for @smulherin1. At 75 I have owned a series of Rams but never have used a spare. The manual was useless. You took all the frustration out of lowering the tire to access some wiring.
I’m on the side of the road. You saved me a lot of time and trouble. Thank you.
You're Welcome! Glad it helped
Best tutorial so far. Couldn't have been anymore straight forward and to the point while explaining all of it. Well done
Thank You!
lol right..... videos like this are rare on UA-cam. no intro. no music. no unnecessary chatter.
Getting ready for a trip next week and thought I'd run thru some details. Good thing I did. Spare was flat and the tool kit release nut was frozen.
I strongly suggest that owners do some rehearsal. That retaining nut under the seat can be a butterfly nut that is one-piece on a threaded shaft that runs down through the floor into a bolster. The threads will be rusted and can be very hard or impossible to turn. I had to use channel locks to get a hold on the ears and get it turning. If it's a hex nut, be sure you have a wrench to fit or it might not be going anywhere. If yours has the solid shaft, you should take it out and clean the threads and coat them with bearing grease. Save yourself additional heartache when you're on your knees in the rain somewhere.
Keep a small flashlite to spot the square nut that the sectioned rod end drives onto. Feeling for it the dark is no bueno because the rod sections are loose and it's hard to get a feel for where the end is inside the body - unless you've done it before. The little square hole next to the port is a good spot to shine the light into while you sight down the rod thru the port. Simple.
Very helpful video. Thank you.
Thank you @OutnBacker! Going on a road trip and checked out what you say here. I had to use penetrating oil and used a screw driver for leverage on that "wing nut" for practice. NOI WAY I would have gotten that loose by hand. Thanks for the heads up!
Thank you for the video, the steps you showed were easy to follow and explained well. Thanks also to Wayne Geordiesdad for giving the tip on keeping the valve stem up.
You're Welcome! Glad it helped
You're the man, I got a random stray key in my tire yesterday and I found the release mechanism but had NO IDEA how to manipulate it, I also had no idea the side panel of the seat came off that easy, i've been trying to get the tools out from under the seat lock bar and that sucks 😂😂😂 thanks for the video!
You're Welcome! Glad it helped
Thank you! I was clueless how to do this on my used Ram purchase, quite the mystery, now solved thanks to you!!
You are welcome! Glad it helped
Just a tip, if you have locking lug nuts you may have a lock on your spare as well we ran into this. There will be a star pattern instead of a nut where you stick the rod in to lower the tire. There should also be a piece in your glove box with your lug key that will fit into your flare end and you insert that into your lowering device.
good tip
OMG, thanks for adding this tip! I read the manual and unless I missed the obvious, it failed to mention the locked spare/key!!! This saved us as we were on our way to deliver a dumpster when catching a flat!!! THANKSSSSSSSSS AGAIN
Thanks. Its that last part with taking the bracket away from the spring and turning it 90 degrees. 10 years of dirt and everything is almost cemented together down there!
Thank you so much! This was a life saving moment for my husband and me on an unfamiliar road.... thank you 😊 💓
You're Welcome! Glad it helped
Thanks you sir my truck had a flat today and I couldn't have fixed it without this video!
You're welcome! Glad it helped
Spot on video! On my 2019 Ram 1500 I had to angle the extension rod slightly upward when searching for the connection point.
Good job bro, changing my daughter's rear shocks and need to remove the tire to get at the top bolt on the drivers side. Live in the rust belt hope it's as easy as your video. Thank You
Thanks partner. Nice job on this video. I just got a flat on our road trip. You saved me much time, frustration and profane utterances. Cheers to you!
You're Welcome! Glad it helped
Lol,on the profane utterances……I know the feeling…….I got lucky and made it to a heated garage to do mine, I couldn’t see doing this on the side of a freeway with ice and snow………hahahaha
😢
Thanks man. So appreciate you taking the time and effort to do up such a great demo. Made it super easy and simple. Cheers! Mike
Thanks! Glad it helped!
thanks for the help ... old guy doing it alone .. lack of strength and muscle tone .. physically demanding for personal physicality ... but I have great courage and can do attitude .... will tackle next step with enthusiasm giving my best shot knowing quite well I may fail ......... tw
If I do need to change a tire, You saved me a lot of time and frustration trying to take the spare off. Thanks for the tutorial!!
You're welcome!
I went to a tire center and they couldn’t figure out how to lower the spare. Thanks for this very informative and helpful video
You're welcome! Glad it helped
Great video. I need to change my tire this morning. Woke up had had a flat
Thanks!
You're Welcome! Glad it helped
Super helpful! Thanks so much! This is a great teaching video!! Keep up the great work!
Thanks! Glad it helped
Thanks for posting this video. Very helpful.
You're welcome!
Thank you. 😂 I always had F150’s so it’s under the back seat. So when I didn’t see it there in the Dodge Ram. I was pissed I was about to go to the dealer and fuss with them for selling me a car without the Jack. Decide to check on UA-cam first. 👍🏽👍🏽. Good video
You're Welcome! Glad it helped
hi just wondering about that cable can it be removed ? If so I just don't want it rattling afterwards . I live in Canada nothing worse then having to change a tire in a snow bank in the winter . I want to put spare tire in the back of truck box.
I'm not sure what it takes to remove the cable but I think you may just be able to crank it up without the tire until its tight
This was a great refresher course for me! Thanks. Love my RAM.
You're Welcome!
That Lowers the tired how do you reales it after
Better than the car manual. THANK YOU!
You're Welcome!
Thanks for the video! I just had to get my spare tire. Easy. 1, 2, 3! I did it! 😅 lol you even helped find my jack.
You're Welcome! Glad it helped
Thank you so much! This was very helpful and right to the point
You're Welcome!
Thanks for this informative video 👍
You're Welcome!
Thanks for the video I just got a new to me ram 1500 and couldn't find the jack till I saw this video thanks man.
You're Welcome! Glad it helped
Same here! I’d looked & thought I didn’t have a jack, but thanx to this video I found out that I do! 😂
Thanks man appreciated
You're Welcome!
Thank you sooo very much for this video. As a single woman driving a RAM, I felt soo vulnerable before watching this video, but I feel educated now and empowered to be able to handle this task now! Lord Jesus bless you and your channel! 🙏
You're Welcome! Glad it helped
Wow very practical design. Would never have guessed from FCA lol.
Thank you for showing this video. If it wasn't for this. I would have never have pulled off my spare tire.
You're Welcome! Glad it helped!
So so helpful!! Thank you!!
You're welcome!
I'm so glad you made this video..life saver
Glad it helped!
thanks for the video dude, these Pages doing the mundane how to videos are the most important thing about UA-cam keep it up dude thanks
Glad it helped!
Thanks! Very helpful! Only thing I add is you can look underneath to put rod on to lower. Was hard for me to feel.
Good Tip!
Glad you were to the point. Thank you.
You're Welcome!
Thanks for this video...Helped me out
You're Welcome!
You just saved me a headache in this hot Mississippi sun in the middle of nowhere, fella. Frfr💯💪🏾
Glad it helped
Awesome!!!! Thank you for the solid😁
Glad it helped
Thank you so much for this video!!
You're Welcome!
Saved my life on the highway when my tire went flat. You're a hero
Glad it helped!
Thanks for the video. Very helpful 👍
You're welcome!
Excellent video! Thanks
You're Welcome!
Saved my day. Thanks!
Great! You're Welcome!
Thank you. Just had first flat on my Ram.
You're Welcome!
Hmm I have aftermarket wheels and tires, both weigh a few lbs more. Any idea how much that spare tire winch will hold on a 21 Ram 1500 Bighorn..
Not sure on actual the max. weight but it's a metal winch and chain so I wouldn't worry about a couple extra pounds - as long as the aftermarket wheel still fits up under the vehicle
Thanks. Very informative and helpful.
You're Welcome! Glad it helped
Thanks, I needed to remove a stubborn hitch from receiver and needed the spare out of the way.
You're Welcome! Glad it helped
Thanks for the helpful video.
You're Welcome!
Thanks so much. Very easy video to follow.
You're Welcome!
Thanks so much, was so helpful!!!
You’re Welcome!
Which side up, when you're cranking it back up? I saw the the tire at the end of the video, so now I know. Thanks.
You're Welcome!
Thanks, very helpful
You're Welcome!
Great video. Thanks
You're Welcome!
Thanks for the effort, now I know. Cheers.
You're Welcome! Glad it helped
Thks for showing, was wondering how that worked
You're Welcome!
good video I'm changing my wheel at -25 ° C in Canada
Спасибо за видео!
Best video of this topic I’ve seen yet!
Thanks!
thanks for the video man i thought my truck didnt come with any of the equipment to change a tire lol
You're Welcome! Glad it helped
Great information..thanks
You're Welcome!
✌️ thank you,Much!! HAPPY NEW YEAR TO YOU AND YOURS!! 🤜🏼🤛🏿 🙏🏿☝️✌️
Thanks! Happy New Year
Thank you!
You're welcome!
Thanks for sharing 👍🏽
Thanks for watching!
Thanks my friend ❤️
You're Welcome!
Saved my day!
Great!
Way better explanation than the owners manual. Thanks much
You're Welcome! Glad it helped!
Terrific ~ Thanks!
You're Welcome!
So awesome. Thank you! Someone just followed me off the highway to tell me my spare was hanging down and wobbly so to get someone to look at it. My 1st thought was what you're shop would be open on Sunday? Then I found your video and problem solved in minutes. Thanks!!
You're Welcome! Glad it helped
Thank you, sir.
You're Welcome!
save my life, thank you ❤
You're welcome!
Well done!
Thanks!
the tool does not fit in to the lowering socket, any ideas? when i peer into the hole on the bumper, it looks like a tamper proof lug nut but the female end..... at a loss
if it has a wheel lock (tamper proof) nut on it there may be the "key" for it in the glovebox
@@PYR-Auto yeah i found that in a comment afterwards. Too bad the previous owner/dealer didnt leave the key there. Had to take the flat wheel to get repaired while the truck sat on jack stands.
I got my 2017 Ram used and it didn’t come with a spare . Do you know the size of the spare tire?
I believe the full size spares are 275/65 R17 but not 100% on that
Is there a way to secure the spare to make it more difficult for a casual thief to steal? It doesn’t look like locking lug nuts or anything like that can be attached.
maybe you can find a lockable cover to go over the access hole? Im not sure if the ones that come on the regular rams ( not ram classic ) lock or not.
Thank you.👍
You're Welcome!
Thanks sr 💪🏻
You're Welcome!
Thank you
You're welcome!
Thanks!
Thanks for the support! It is appreciated!
It was a great video. I tried to put the extension with the hook in the hole, before I saw the video. What is the hook for? I have a 2020 Ram limited . Again great video, glad I found it.
Thanks! The hook piece is for the jack handle
Apparently me and my wife just got screwed. We bought a 2016 big horn in 2017 and it was the rental version truck, had 13000k miles on it. Apparently it had a flat previously and they never put the star tup extension piece back in. I callesnthe service department to get a new one they said they are all unique and I'd have to pay to remove the star lock and install a new one and buy a new star tip kit. Is this true? Are they all unique star tips?
I can't say on a 2017 big horn specifically but I have had similar issues on other vehicles where the unique wheel lock was lost and needed to be removed and a new one installed
Appreciated but not same 2013 2500 hd has connectors to frame of passenger seat small difference I know but owners will have to reach under and pull all 4 components (to drop tire) individually
Good Tip!
Thanks bro
You're Welcome!
How would you get it down if you don't have the tools it came with the truck.
not sure
good job
Thanks!
Thank you! I nearly f'd up my spare system. 😂
You're Welcome! Glad it helped
Does this work for the 2016 1500?
yes
What is the piece with the curve that you didn't use for?
That’s part of the jack handle - the curved end hooks onto the loop that’s on the jack
The “nut” on line does not match the square tool. It’s an odd looking shape. More like a torx bit than anything else.
Thank you sir. I was using the wrong end hahaha
Glad it helped!
What's the piece with the hook for?
the handle for the jack
Great video. Straight forward, quick and easy to follow.
Thanks!
Just checked my 2015 , tools are missing
If your truck is a few years old good luck turning that nut, especially if you live in a cold climate where the roads get salted. Had a flat in my 2013 Ram a couple years ago. Tried to drop the spare down and that nut was completely seized up to the point where the rods were twisting and bending. Could't get it to break loose. Didn't have enough leverage with those cheap rods that come with the jack. I've always thought this was a poorly designed system but yet every year truck that comes out still has this set up. Luckily I was home and the tire went flat over night or I would have been stranded somewhere. Just a tip: Now in my new Ram I lower the spare and raise it back up a couple times a year just to keep that nut moving so it doesn't seize up like my in last truck.
Thank you Sr,,, much appreciated helpful video 👍
You're Welcome! Glad it helped