Hybrid Tama ClubJam drumkit with Yamaha EAD10 & Agean R low noise cymbals
Вставка
- Опубліковано 7 чер 2022
- www.drum-tec.com/cymbals/agea...
👉 Today we've equipped the Tama Club Jam drumkit with drum-tec pro mesh heads, Yamaha DT50S snare/tom triggers, EAD bass drum sensor & EAD10 sound module once again, and use the beautiful Agean R low noise cymbals for an electroacoustic hybrid drum setup 🥁🎧⚡️
The drum-tec pro mesh heads are not the most silent mesh option available, but they give a nice kind of "sound" to the snare & toms especially, for more "real drum" feel while practicing.
There are no additional mics active in the mix, all sounds are coming out of the EAD10 sound module. The bass drum sensor works as a stereo microphone & kick trigger at the same time!
🔥 Need help finding the right kit? Talk to us and we'll help you: drumt.ec/kit-finder 🔥
Please comment or ask any question you might have. You can also get in touch with our service team directly through experts@drum-tec.de
Video shot @ drum-tec West / Spytunes Recording Studio, Mainz.
Drumming & production by www.ralfschumacher.eu, follow Ralf on@digitaldrumming
#tamadrums #edrums #drumtec
In my opinion, the EAD10 is just like one of best things that 'happened to' hybrid sets. It's just amazing!
The cymbals are something else but the hush hush series combines the best of both worlds
Your playing is wonderful. Thanks to you, I just bought the Tama Club Jam set. Thank you, you are doing a great job!
Omg those cymbals 😍😍. I’ve me r heard of them into this video so thank you. I’m experimenting with something similar
Interesting for sure!
Excellent comme à chaque fois, merci
Merci Roy!
These cymbals are just 😍
Did you put mesh head on the Bass Drum also? Or just the snare and toms?
Do the Triggers pick up rim shots and cross sticking?
Поставил лайк, спасибо за видео. Раньше себе хотел так же собирать комплект (Тама уже есть). Но ещё раз внимательно послушал. И мнение - всё совсем неоднозначно. Сильный звук малого барабана - без вариаций, торчит, как "гвоздь", не варьируется. Из-за этого и одинаковая атака и "пулемётность". "Призрачные ноты" прослушиваются только в заполнениях, а не в основном рисунке (ритме, партии) , там они почему-то "затираются". Вообщем - убедили, буду пользоваться и дальше старым добрым Тд30 и ТМ2)
Thank you Drumtec for this lovely demo!
If I understand correctly, the kick trigger of the EAD10 does not trigger mesh heads. How did you get it to trigger the kick drum with the mesh head?
Also, did you use the built in sounds of the EAD10? And if yes, what dit you use because it sounded quite pleasant and natural.
How did you get the EAD 10 trigger to work on a mesh head? I can’t get mine to work unless I change the settings to fix curve and with my Tom being mounted on my bass, drum and triggers to kick as well.
Anyone have recommended trigger setting using EAD firmware 2.0 and the low volume kits? Seems that the trigger settings have less adjustment options than ver 1.0
how is the latency? could you do this live, monitoring the EAD10 output?
Good..
What are the advantages and disadvantages of a hybrid vs a full electronic set? Any inputs and / or links would be very helpful. Thanks!
Hybrid will be louder :) yet acoustic low noise cymbals will offer a different playing feel & offer nuances (like striking in various areas) that an electronic cymbal won't have. Yet, sound fleixibility is also much bigger with the electronic cymbals. You can find a noise level comparison as well as several sound demos of various low volume cymbals here:
ua-cam.com/video/0sa10UImETM/v-deo.html
ua-cam.com/video/7Z4cdK-1Wuk/v-deo.html
ua-cam.com/video/BdkTkA_GKa4/v-deo.html
Feel free to get in touch through experts@drum-tec.de for further assistance if you like. Kind regards!
I wonder how does that kit perform in a live scenario.. with guitars, bass and vocals all together.. Been eyeing those cymbals for a while and this kit size would be ideal for portability!!
Hey Pietro, you can combine Agean low noise cymbals with any acoustic / half acoustic setup and either mic them up with a pair of overhead mics or use something like the Yamaha EAD10 & bass drum sensor (which works as a stereo mic & kick trigger actually). Please don't hesitate to get in touch through experts@drum-tec.de for further assistance if you like. Kind regards!
@@drumtecTV what triggers did you use? Mainly for the bass. 2box kick couldn't fit with the tama hoop. Tnx!
@@dancro It's the Yamaha EAD kick sensor, you can see all the gear used in the intro of the video I think. Kind regards!
Hey Ralf, is that rim rubber by pintech? Or does drumtec have their own? Was looking for this kind of setup where the side mounted triggers go right on the rubber.
These are the drum-tec RimNoise Eliminators, that you'll find over here:
www.drum-tec.com/rimnoise-eliminator-pro
Kind regards!
I see that you use mesh heads. Do you need the triggers because of that ? If there are no triggers it sounds worse with mesh heads compared to regular drumheads?
Thanks !
Did you use trigger for cymbals?
This sounds so good 👀 Would this be low enough for apartment use?
Hi Levi, you can find a noise level comparison of low volume cymbals & e-cymbals over here:
ua-cam.com/video/0sa10UImETM/v-deo.html
I guess it depends on your appartment/neighbours in the end, kind regards!
@@drumtecTV Thanks a lot for that!
donde pusiste los gatillos yamaha? ¿Hay una opción para 3 carretes? Aparte de la caja?
Hi Nilton, please get in touch through experts@drum-tec.de directly regarding your question. Kind regards!
It is great. I am thinking to turn into my clubjam fully with yamaha ead by using silent drum head is that possible? And also how did you record the cymbals with ead triggers? Should I buy overhead mics. for cymbals or the mic on the kick can take the cymbals?
Hey Burak, please get in touch through experts@drum-tec.de for further advice on the kit setup if you like. The intro passage of the video shows the overhead sound of the kit, while the groove/performance passages were recorded staright from the EAD module (Stereo out). The kick sensor works as a stereo mic & a bd trigger at the same time, so in this setup you wouldn't need any additional microphones. Kind regards!
Have you ever use your own triggers on the EAD10 module?
it would be great to see the jazz/natural and rock/normal r series symbols played in one video to hear the difference.
ua-cam.com/video/BdkTkA_GKa4/v-deo.html
Kind regards!
@@drumtecTV Thanks this is exactly what i’ve been looking for!
Is this a configuration you sell?
Hey David, sure :)
www.drum-tec.com/hybrid-drums/hybrid-sets
Feel free to get in touch through experts@drum-tec.de for further assistance, you can basically get any custom kit configuration from drum-tec. Kind regards!
Bass drumhead is normal or mesh head ?
It's drum-tec pro mesh heads:
www.drum-tec.com/drum-tec-hybrid-pro-mesh-head
Kind regards!
Guys, I really need help. The td07KX or the td17KV?
Hey Halan, if you have the budget, I'd highly recomment the TD-17KV (better module, bigger/better pads, more flexibility). Kind regards!
@@drumtecTV thank you for answer me. Love all the videos. Here from Brazil.
Jesus he is great
Thank you very much Laurdess! You can find more drumming / music & sound demo videos on my private channel digitaldrumming too if you like:
www.youtube.com/@digitaldrumming
Kind regards!