The only thing I want to change on mine are the tuners, so thanks for this video, it's a great help. Have you ever considered putting a coil splitter on so you can get a singe coil effect on the pickups?
I agree especially after looking at the tuners side by side... They are identical other than the tuning key and the locking mechinism. Would not specifically recommend that upgrade.
I got a set of Gotoh Maglock Kluson style locking tuners for mine. They’re the SD 90’s. They cost about $70. They’re drop in replacements. Mine are nickel with black tuning keys, so they look just like the stock tuners. Locking wheel is on the back.
@@dimetriusrasul You need to look for the vintage ream (11/32”). Kluson also make a Revolution series that are locking that will also fit. Make sure you’re getting the set for vintage size holes and you’re ok.
I just ordered the exact same tuners for my Zach Meyer. Both are supposed to show up Friday. I'm about to chew through my leash waiting until then. Later tater. xxxooo dc
i ran into the same issue with my pickup rings. why they decide to make one model have different size rings is beyond me. looking forward to see what they say back to you
@@itsanthonybest Hi Anthony, Do you know if PRS already release the Pickup Rings? I found in their page the Universal Angle Rings. Those are the ones that fit? Great Review by the way!
I can't seem to find those specific locking tuners on the PRS website. Could you possibly link to where you got those? Great upgrades! I just got my ZM SE for Father's Day!
Doing some research before purchasing some locking tuners. You mentioned you didnt change the bushings. Some forums talk about having to ream a bit. When you replaced the tuners without replacing the bushings, i assume you didnt have to make any adjustments? Just screw em in n good to go ?
Was there any update on the situation with the humbucker rings? Just got myself this guitar the other day and plan on changing all the black to cream white too
Hi Anthony, I like the look of the white tuner buttons - when you get the cream pickup rings on there that's going to look really nice. Thanks for the update on the nut material - one less thing to worry about. Probably makes sense in a supply chain and part number sense to use the same nut everywhere. And worth it, even if the part is more expensive, just in the reduction of hassle factor. Looks like new strings are a must - I'll see how the stock ones feel, but I have some of my regular D'Addario XL strings in 10-46 ready to go as this will stay in standard E. (Or maybe try some fancy Nanoweb/Elixir strings on it) My other guitar will now be set up for drop tuning as it has EMG 81/60's in it. I may look at getting the PRS core knobs on it since they look a bit nicer. Are they also a bit smaller in diameter?
Any news on the cream pickguard rings? I called PRS and Stewmac and they seem to believe the old model rings will fit. So I bought them and they do not fit!
Are you still on the same 9 gauge strings that came stock or did you update to a different gauge? How is the cut of the nut because I have had issues with mine grabbing a lot; did you have to adjust it?
My switch is broken top and middle position fine but bottom cut's right out. The shop I bought it from is an hour away and I already took it back once. The guitar is good but support is not level A.
I don’t know if they changed the pups from the last version (I don’t think they did) but, for me, that was the first change. I thought they were pretty muddy.
As for the neighbors...I "saw" [and heard the whole thing! If ya need a witness.]. I have had similar noisy neighbor issues. Btw...never move next door to a drummer...terrible drummer or a real pro...doesn't matter! Intolerable. Soundproofing, anyone...dah?!!!
As for the neighbors...I "saw" [and heard the whole thing! If ya need a witness.]. I have had similar noisy neighbor issues. Btw...never move next door to a drummer...terrible drummer or a real pro...doesn't matter! Intolerable. Soundproofing, anyone...dah?!!!
Good news on the nut! It was the biggest flaw with the Holcomb SE.
Great guitar….I love mine, can’t put it down. Thanks for the insight on the tuners, etc.
Oh....thanks for that research into the nut issue. I WAS gettin' concerned. Much appreciated.
The only thing I want to change on mine are the tuners, so thanks for this video, it's a great help. Have you ever considered putting a coil splitter on so you can get a singe coil effect on the pickups?
I just got a pristine Zach Myers from 2017. All I did was install some brass bridge studs and some Kluson locking tuners. I'm a happy camper👍
The cost of the upgraded locking tuners is roughly 20% of the guitar price. Uh, umm, eeeh, no.
I agree especially after looking at the tuners side by side... They are identical other than the tuning key and the locking mechinism. Would not specifically recommend that upgrade.
I got a set of Gotoh Maglock Kluson style locking tuners for mine. They’re the SD 90’s. They cost about $70. They’re drop in replacements.
Mine are nickel with black tuning keys, so they look just like the stock tuners. Locking wheel is on the back.
Is Gotoh SD90 fit in with PRS SE ZM 2021? Is there any issue when installing those locking tuners?
@@dimetriusrasul You need to look for the vintage ream (11/32”). Kluson also make a Revolution series that are locking that will also fit. Make sure you’re getting the set for vintage size holes and you’re ok.
I just ordered the exact same tuners for my Zach Meyer. Both are supposed to show up Friday. I'm about to chew through my leash waiting until then.
Later tater.
xxxooo
dc
i ran into the same issue with my pickup rings. why they decide to make one model have different size rings is beyond me. looking forward to see what they say back to you
I have been told they will be released to the PRS store "in a few weeks" but I have not seen anything new added.
@@itsanthonybest did they say what they will be called? Are they specifically se Myers? I'm swapping mine as well.
Same as me.
Hope there are suitable rings soon...
@@itsanthonybest Hi Anthony, Do you know if PRS already release the Pickup Rings? I found in their page the Universal Angle Rings. Those are the ones that fit? Great Review by the way!
I can't seem to find those specific locking tuners on the PRS website. Could you possibly link to where you got those? Great upgrades! I just got my ZM SE for Father's Day!
This is what you are looking for: reverb.com/item/41307403-prs-phase-3-vintage-style-locking-tuners
I didnt see them on the PRS site either.
Beautiful guitar dude. What string gauge did you settle on? I just ordered this guitar but I’m thinking 10-46 as opposed to the PRS SE 9-42.
46-10 for sure.
Ggod choice.
@@itsanthonybest Agreed.
Doing some research before purchasing some locking tuners. You mentioned you didnt change the bushings. Some forums talk about having to ream a bit. When you replaced the tuners without replacing the bushings, i assume you didnt have to make any adjustments? Just screw em in n good to go ?
Was there any update on the situation with the humbucker rings? Just got myself this guitar the other day and plan on changing all the black to cream white too
Good on ya
Hi Anthony,
I like the look of the white tuner buttons - when you get the cream pickup rings on there that's going to look really nice.
Thanks for the update on the nut material - one less thing to worry about. Probably makes sense in a supply chain and part number sense to use the same nut everywhere.
And worth it, even if the part is more expensive, just in the reduction of hassle factor.
Looks like new strings are a must - I'll see how the stock ones feel, but I have some of my regular D'Addario XL strings in 10-46 ready to go as this will stay in standard E.
(Or maybe try some fancy Nanoweb/Elixir strings on it)
My other guitar will now be set up for drop tuning as it has EMG 81/60's in it.
I may look at getting the PRS core knobs on it since they look a bit nicer. Are they also a bit smaller in diameter?
Any news on the cream pickguard rings? I called PRS and Stewmac and they seem to believe the old model rings will fit. So I bought them and they do not fit!
I’ve heard nothing new. But i sold this guitar months ago and haven’t checked since.
Great modification, are the thumb screws for locking the same as SE locking tuners,? Phase ll/lll ?
I am not sure if the top / thumb screws are the same threading or not.
@@itsanthonybest l just received these, and they're a fit for SE locking tuner as well....
Hi, i often don't bother plugging when i play, so is this guitar loud enough unplugged pls🤘
Hi! Did you find the correct pickup ring size?
Not yet. Contacted PRS support and they said they will be putting them on the store “soon”…
@@itsanthonybest same with you. Ordered the SE Cream pickup ring but did not fit to PRS ZM 2021
Are you still on the same 9 gauge strings that came stock or did you update to a different gauge? How is the cut of the nut because I have had issues with mine grabbing a lot; did you have to adjust it?
Nah i went to 46-10 I didn't need any adjustments on mine... I did adjust the bridge height for a little lower action.
Could you replace the humbucker mounting rings to the cream ones? I would love to see how it ended up
Those rings have not been released yet. And I have actually sold this guitar.
SE use metric mesurements. USA models use standard. Goto Johnmanns guitar vault.
Did you ever hear back from PRS on the pickup rings?
I am told they will be available in the store later this year. These are the same rings that fit the SE Hollowbody line, just not in the shop yet.
tbh the only thing I'm going to replace on mine is the janky 3 way switch and maybe pickups even though I actually think they sound pretty decent.
I didnt have issues with the switch, but i for sure agree the pickups could use a swap for a different set with a little more bite.
My switch is broken top and middle position fine but bottom cut's right out. The shop I bought it from is an hour away and I already took it back once. The guitar is good but support is not level A.
Do you think it would be difficult to put nickle pickup covers over the humbuckers?
No, but you will get feedback because the covers will not be potted. I would suggest replacing the pickups entirely with a covered set.
Put covers on mine no issues what so ever..
Can you use the current phase 3 or did you use the vintage phase 3?
Only difference between phase 3 vintage and regular is locking nut In my understanding. Phase 2 screw holes do not line up.
I used phase III locking.
Is there any update about the cream pickup ring from PRS Indonesia?
No update just, they will be available later this year
.
The pickups must be great since didn’t mention the need to upgrade.
I don’t know if they changed the pups from the last version (I don’t think they did) but, for me, that was the first change. I thought they were pretty muddy.
The pickups are "fine" nothing worth writing home about, and might be worth an upgrade to something with a bit more clarity... But not bad at all.
I thought the bridge pickup is decent, it's fine. Neck could be a lot better though. I'm swapping both at some point.
Hello, where did you get your truss rod cover?
facebook.com/forbiddenengravings
Hi. Which phase tuners are these ? Thanks
Phase III
As for the neighbors...I "saw" [and heard the whole thing! If ya need a witness.].
I have had similar noisy neighbor issues. Btw...never move next door to a drummer...terrible drummer or a real pro...doesn't matter! Intolerable. Soundproofing, anyone...dah?!!!
You have something on your nails bro….
Prs locking tuners are a joke. Plastic pegs 🤮
😅😂🤣 this s a joke ? Right 😅😂🤣
As for the neighbors...I "saw" [and heard the whole thing! If ya need a witness.].
I have had similar noisy neighbor issues. Btw...never move next door to a drummer...terrible drummer or a real pro...doesn't matter! Intolerable. Soundproofing, anyone...dah?!!!