Actualicé mi pc hackintosh desde Ventura a macOS Sequoia perfectamente... Pero el único problema que tengo es que al llegar a la pantalla de login la pantalla queda negra, pierde señal... pero desconecto y vuelvo a conectar el HDMI y tiene señal nuevamente y puedo seguir usando macOS Sequoia sin problemas... En el login es el único momento que pierde señal... desconectando y conectado el HDMI vuelvo abtener señal y se muestra la pantalla de login... tendré que probar las opciones de éste video...
It worked for about 10 minutes, then I saw about seven vertical lines at the bottom of my screen then my screen went black again. When I turned my computer off and then on again, the Apple icon comes up and the status bar begins to load then it goes blank. Now none of the options you mentioned are working.
@@gauranshsethi1755 I had to take my MacBook to the Apple store, and they determined that I needed a new display and Lid angle sensor. Gratefully, I have a protection plan, so it didn't cost anything. They fixed it in three days and mailed it back to me. It's practically a brand-new computer.
It happened to me twice when I used a different Mac charger. I connected to an external display and used it until the battery drained, then charged it fresh with my own charger.
None of these methods worked for me and legit just got this computer never buying Macbook ever again I spent way too much money on this for it not to work
Thanks a lot it worked ❤, if you guys have a problem on the video I think it’s because you need to plug the usb into the keyboard to make sure the commands work properly. I did the VRAM & PRAM (method 3) and everything worked normally again even the sound of booting tuning on before i was turned it off.
Thanks so much this happened to me and ı was scared that my parents will get angry because my last computer got broken too but this worked without my patente knowing Thanks
Both screens are working but when I double tap on one to enable full screen the other screen goes black or blank. It's still on but won't show the image. Any ideas please?
Omg Holding Shift down and pressing the power button actually worked (for a black screen on my iMac until I saw the apple logo)?! Thank you soo much, I was worried that I’d have to go pay a bunch to get it fixed again
it worked in the safe mode, thank you for saving me from a huge scam of apple centres in bangalore they didn't try anything just said its display issue and you should get it changed
Actualicé mi pc hackintosh desde Ventura a macOS Sequoia perfectamente... Pero el único problema que tengo es que al llegar a la pantalla de login la pantalla queda negra, pierde señal... pero desconecto y vuelvo a conectar el HDMI y tiene señal nuevamente y puedo seguir usando macOS Sequoia sin problemas.
Thanks bro I was really scared Plz! Can you make a video about restore and erase all data then safari and app store isn't working needs activation lock how to fix this problem I forgot my previous apple id.
Actualicé mi pc hackintosh desde Ventura a macOS Sequoia perfectamente... Pero el único problema que tengo es que al llegar a la pantalla de login la pantalla queda negra, pierde señal... pero desconecto y vuelvo a conectar el HDMI y tiene señal nuevamente y puedo seguir usando macOS Sequoia sin problemas... En el login es el único momento que pierde señal... desconectando y conectado el HDMI vuelvo abtener señal y se muestra la pantalla de login... tendré que probar las opciones de éste video.
i have a MPB 15" 2016 but it's very unusual... i can use normal for about 2 to 3 hours.. then the screen shuts down.. and i have to pwer off and wait at least 1 hour to turn on again.. to keep working.. does anyone have the same issue and how your fix it? is the motherboard or the screen is broke i dunno?..
problem here is how to solve black screen with pointer only after a login screen ??? Macbook starts normally and login screen appears but whenever i put password for the user then hit enter it doesn't load desktop screen only black with pointer ? plz help me
Thx! It worked. But after a couple of days later, my daughter plugged in to charge and it wouldn’t power up again. I had to do the reset smc process u showed and booted up once again.. any idea why have to keep resetting the smc? Thx
Hey, i was trying to change my color profile on my mac and i opened up the color sync app to try and chanfe it and i double clicked aomwthing and everythi g just went black, plwase help ne if you can@Tenorshare4DDiGDataRecovery
Hey, i was trying to change my color profile, and i couldnt find it in displays so i went to color sync to try and change it and i double clicked something and everything just went black, please help if you can@@Tenorshare4DDiGDataRecovery
Get 4DDiG Mac Boot Genius ( bit.ly/3QXmpPy ) for free!
Anyone gonna tell him the reason we are here is the Mac starts up to a black screen so no option to see start up options!
Shift + Control + Command + Power Button did the job!!! Thank you so much!
I don’t have the power button
@@KamiandTeddif you have touch id press down on the button
@@ellisahr I did, it took me to something called “macOS recovery”
Same
Shift + Control + Option + Power On, works very well
Thank u bro
Same here! Thank you
Not sure what's going on, it started with the flickering issue and now this issue with the screen going black 😫
same issue, but not working
Not working tf should i do nowww
@@gayrryalivio7512did it work now???
Not working
Shift + Control + Option + Power On worked! Thank you so much!
OMG never thought it would work!!!
Shift + Control + Option + Power On worked for me
When I close the lid of my MacBook Pro and open it, the screen becomes blank but it keeps running. What do you think I should do?
It’s probably thirsty and needs a drink. Have you tried pouring water in it?
Actualicé mi pc hackintosh desde Ventura a macOS Sequoia perfectamente... Pero el único problema que tengo es que al llegar a la pantalla de login la pantalla queda negra, pierde señal... pero desconecto y vuelvo a conectar el HDMI y tiene señal nuevamente y puedo seguir usando macOS Sequoia sin problemas...
En el login es el único momento que pierde señal... desconectando y conectado el HDMI vuelvo abtener señal y se muestra la pantalla de login... tendré que probar las opciones de éste video...
yeah I did it and it worked well. but can I know, why this issue happens? is it flex-gate issue?
Shift + Control + Option + Power On worked! It took me to a screen where I had to select my hard drive, then it worked. Thanks.
It worked for about 10 minutes, then I saw about seven vertical lines at the bottom of my screen then my screen went black again. When I turned my computer off and then on again, the Apple icon comes up and the status bar begins to load then it goes blank. Now none of the options you mentioned are working.
Bro thank you, this worked for me! I’ve been trying to get my MacBook back on for 3 days
Thank you so much! I literally got a heart attack when the screen went black lol
@@EvolvingWithUncleD same bro. What did you do afterwards please tell.
@@gauranshsethi1755 I had to take my MacBook to the Apple store, and they determined that I needed a new display and Lid angle sensor. Gratefully, I have a protection plan, so it didn't cost anything. They fixed it in three days and mailed it back to me. It's practically a brand-new computer.
It happened to me twice when I used a different Mac charger. I connected to an external display and used it until the battery drained, then charged it fresh with my own charger.
Did it worked?
Pressing on the power button to close it and waiting for a minute before powering it back on worked. Thank youuu
I can see the Apple logo on startup but completely blurry…. Any idea how to get this sorted ???
Lol so simply restarting youre computer? I don’t think you ever had an issue
thank you so much the first method worked for me
Glad it helped
None of these methods worked for me and legit just got this computer never buying Macbook ever again I spent way too much money on this for it not to work
if the screen is black but i can hear the start up sound, how am i to see the options you refer to?
Connect it to a external monitor
@@tperm1212then what? 😢
Same problem
@@tperm1212 How?
@@tperm1212same problem! What did u do?
The SMC option worked for me. Thank you!
Thanks a lot it worked ❤, if you guys have a problem on the video I think it’s because you need to plug the usb into the keyboard to make sure the commands work properly. I did the VRAM & PRAM (method 3) and everything worked normally again even the sound of booting tuning on before i was turned it off.
Can i use external monitor to do this methods?
yes
How?
Plz Share video link plz
Control+command+power.
It worked thank you sir
Thanks so much this happened to me and ı was scared that my parents will get angry because my last computer got broken too but this worked without my patente knowing Thanks
Hi , I did steps but again I can’t see anything on my Mac
Method 3 works in my case. Thank you ❤
Both screens are working but when I double tap on one to enable full screen the other screen goes black or blank. It's still on but won't show the image. Any ideas please?
Hold the power button for 15s did work for me
Omg Holding Shift down and pressing the power button actually worked (for a black screen on my iMac until I saw the apple logo)?! Thank you soo much, I was worried that I’d have to go pay a bunch to get it fixed again
You're welcome
Holy shit that did it
when i do this i hear a sound but still not open:(((
The screen on d black so telling me to look at any options on a black screen is pointless. I don’t think you thought that through.
One of the options worked just now 🥳🥳🥳🥳 so happy
Glad it helped.
i have another problem, shows wifi no driver installed, if there's a way to solve
Omg tysm
Thanks,, it worked for me with Method 3.
it worked in the safe mode, thank you for saving me from a huge scam of apple centres in bangalore they didn't try anything just said its display issue and you should get it changed
Thank-you so much it will works I'll really thanks for giving this information about mac ❤❤
Now iam your subscriber ☺️☺️
nothing works.. wasted my time
Sucks to be you because it worked for me 😆✌🏼
did u ever end up getting it fixed? because they didn’t work for me either. let me know please cannot be bothered to spend 700$
Hey what did you do to get it fixed?
What did you do? @@abhinavm5952
Command +control the power button
It worked W man and vid I’m watch this forever
Excellent video!!! Thank you very very much. It worked!!!!
you're welcome
Thank ….. shift+control+option+power works for me thanks a lot
You're welcome!
Actualicé mi pc hackintosh desde Ventura a macOS Sequoia perfectamente... Pero el único problema que tengo es que al llegar a la pantalla de login la pantalla queda negra, pierde señal... pero desconecto y vuelvo a conectar el HDMI y tiene señal nuevamente y puedo seguir usando macOS Sequoia sin problemas.
Alhamdulillah its work. Thank
Is re-installing MacOs eliminates files and data?
Thanks bro I was really scared
Plz! Can you make a video about restore and erase all data then safari and app store isn't working needs activation lock how to fix this problem I forgot my previous apple id.
Shift control and option it worked thank you so much along with the power button
none of these worked for me, i couldn't see the apple logo when i turned on the computer in any of these methods. is there anything else i could do?
have you found out the solution? i have the same problem here
😢 I am facing the exact same problem
Same for me. Suddenly it stopped working.
Same here! update me guys please if any of u found a solution
@@souvikmallick7942 Did you found the sol to it bro??
Thanks dude
thanks 🌹 you helped me
Thanks
Same case
Me after switching off Marcbook bro I see rainbow colors,is that normal?
It worked!!! Thank you so much!!! ❤
Guys i have an idea, just say: siri, make it so my screen isn't black
Wow, great! 👍
The video was ok, but the music was annoying...
Thanks bro it worked for me
It worked thank you sir
You’re amazing, thanks a lot!
How can you see start up option if the screen is black
Actualicé mi pc hackintosh desde Ventura a macOS Sequoia perfectamente... Pero el único problema que tengo es que al llegar a la pantalla de login la pantalla queda negra, pierde señal... pero desconecto y vuelvo a conectar el HDMI y tiene señal nuevamente y puedo seguir usando macOS Sequoia sin problemas...
En el login es el único momento que pierde señal... desconectando y conectado el HDMI vuelvo abtener señal y se muestra la pantalla de login... tendré que probar las opciones de éste video.
Thank you! It helped me out!
😆
my m1 mini started going black quick, but looks like a app cause I see bottom icon menu.
IT WORKS! THANK YOU
thanku it helped me
Welcome
For me it's a life saving.
Thank you 🥰🥰🥰
i have a MPB 15" 2016 but it's very unusual... i can use normal for about 2 to 3 hours.. then the screen shuts down.. and i have to pwer off and wait at least 1 hour to turn on again.. to keep working.. does anyone have the same issue and how your fix it? is the motherboard or the screen is broke i dunno?..
Worked perfect
Thanks it worked
Thanks..worked in my case🎉🎉🎉
You guys are the best in town
I geta log in screen. I log in and then it goes black. The cursor is visible but the screen is black.
Me too!! Did you ever find a solution for this?
Thank uu😭😭
No problem 😊
Safe Mode worked for me.....Love youuu...... (APPLE SILICON)
Thanks a lot,,,,,saved me
The solutions offered by Apple are a mockery to users: The real failure is a hardware bug that affects a massive number of M1 devices onwards.
Thank you , it worked . 😊😊🎉❤❤❤
problem here is how to solve black screen with pointer only after a login screen ??? Macbook starts normally and login screen appears but whenever i put password for the user then hit enter it doesn't load desktop screen only black with pointer ? plz help me
thank you so much it’s so helpful
And what do we do if the mac boots to the apple logo and in less than 5 seconds it just goes black screen? :D
This is happening to me right now!! Did you ever get it fixed?
Well, even from Apple store they could not get my black screen fixed
If any one could help me please reply no one of them works with me, The laptop fan is very loud when i make the steps and the screen still black
Thank you ur method worked😭😭😭
Not working on me 😢
Thank you soooo much life savior
thanks so much
Nothing is work 😢
thank you it helps❤
Problem solved... Tnx.. Option+contron+p+r+power button..
Solved
How can i select those options? When my screen is black 😞
If it doesn’t work then your screen is bad change it
Thx! It worked. But after a couple of days later, my daughter plugged in to charge and it wouldn’t power up again. I had to do the reset smc process u showed and booted up once again.. any idea why have to keep resetting the smc? Thx
@@jeffreyefemena1082they swapped the display with different displays… I mean new screens but still the same
Thank you so much dear ❤
wait that actually worked
None of the above work for me ??
Nothing worked thanks for wasting my time all these people writing that it worked probably bots
I did all the steps but it didn't work for my MacBook Pro.
Take it to some repair shop, it might be hardware issue.
Hey, i was trying to change my color profile on my mac and i opened up the color sync app to try and chanfe it and i double clicked aomwthing and everythi g just went black, plwase help ne if you can@Tenorshare4DDiGDataRecovery
Hey, i was trying to change my color profile, and i couldnt find it in displays so i went to color sync to try and change it and i double clicked something and everything just went black, please help if you can@@Tenorshare4DDiGDataRecovery
Nothing worked! 😭😭😭
THANK U
I’m crying because I just can’t seem to fix it.
Control + Power button and then just power button worked 😭😭😭
Saved my career with this one😂
Use lesse for Mac with Apple ship
Method 5: Reinstall MacOS. It says it can't reinstall because it has too many files? I need to take off 17,99 GB to install.
It could be. So you could back up data first.
Method 3 worked for me! Thank you!
Glad it helped!
Works🎉🎉
1:47 😂😂😂😂 the AI robo voice…
3:00 actually
Thank you so much, it really help me
For these types of video, the music is a pure nuisance.
My MAC just stop working at all