Chainsaw oiler not working? Try this easy trick to diagnose.

Carefully spray air on the clutch drum sprocket to test your chainsaw oiler. If it’s not working then further diagnosing is required.
Don’t forget to follow and comment!!!

[@Kevin-nf5wi]

You have no idea how much you just helped me. Thank you

[@10minutefix]

No problem. Thanks for watching.

[@jaredhanson9758]

Dude. Great video. You’ll save a bunch of chainsaws from this

[@10minutefix]

Thanks for watching.

[@ericvantassel3179]

This is what I needed. Thanks

[@10minutefix]

Thanks for watching

[@karenwilliams3882]

Thank you 😊

[@yacobshelelshaddai4543]

I’m having issues with mine I think the filter might need replacing not sure cleaned it all checked it all etc bit stumped atm

[@10minutefix]

Is the oiler not working? Are you not getting any oil?

[@CROTCH_ROCKET_JOE]

🎉🎉🎉🎉🎉

[@hilham89]

I dont have an issue of it not coming out. My issues is to much is coming out.

[@10minutefix]

Well there should always be oil coming out when the chain is turning but when it is shut off then it might still be pressurized. Unscrew the oil cap and it should stop.

[@hilham89]

@10minutefix oh no, when I to much coming out I mean you can run it and have a puddle before you even start cutting

[@10minutefix]

@@hilham89 then your oiler is probably not working or there is a leak in the casing. I would remove the chain and bar and test it. Be careful with the clutch. Clean the oiler area and run it. You will see where the oil is coming out of and how much.

[@hilham89]

@10minutefix no what I mean is where the oil comes out to oil the bar and chain, to much comes out but I found out that you can restrict the flow by a screw that's underneath the chainsaw

[@fallingsuncreations9270]

@@10minutefixI have a saw I’m working on, and the case seems toast, it leaks from the where the oiler is. I think the case is done for. Second opinion?

[@extremefishermen6335]

what type oil are you using? looks a little thin .

[@10minutefix]

I filled the customer’s saw with Stihl bar and chain oil.

[@joereynolds475]

So what if it doesn't work?

[@10minutefix]

The oiler hose line is clogged or the oiler worm is not working.

[@joereynolds475]

Yea had to take my clutch off and clean out all the hoses and shite that had accumulated under there. That seemed to do it even tho none of the hoses was blocked

[@10minutefix]

@joereynolds475 well, as long as it works now.