Scott's Briggs Intek OHV engine LAWNMOWER been sitting. WON'T START. HOW TO Clean the CARBURETOR
Вставка
- Опубліковано 4 бер 2018
- JUNKYARD LAWNMOWER FIXED after sitting for too long. Sat over the Winter OUTSIDE in the rain and snow. Common Scotts Lawnmower Won't START or engine STARTS then DIES REPAIR. A very common storage problem is fixed THE EASY WAY on an ORANGE Scott's Lawnmower with a Briggs and Stratton 6.5 Horsepower OHV Intek "Edge" model motor. Water and sediment in CARB. Carburetor and FUEL System needed Cleaning. Problems Diagnose trroubleshoot explained best way to CLEAN a CARBURETOR Gas tank fuel system, fuel line. Primer bulb button check test fix. AIR filter changed
Music by BonzaiRod song~ "George"
Copyright 2018 Jeff's Little Engine Service
Donations and tips are GREATLY appreciated!
click PayPal link below
www.paypal.com/cgi-bin/webscr...
Copyright 2016 Jeffs Little Engine Service
NOW Sponsored by GRIP tools! Check them out!
gripontools.net/
PLEASE KEEP IN MIND when you are watching my videos: I am showing you the least expensive, quickest "backyard" methods for repairing or servicing your lawnmower. Replacing all components such as gaskets and fuel lines is always recommended when rebuilding or repairing equipment. With these videos I hope you are able to fix and repair your lawnmower yourself with minimal parts, knowledge and tools. Thank you for watching!
Thank you! I saved $180 and got my log splitter working in under 30mins.
Thank you saved me some money.. along with a tune up running strong!
Your videos are very well done. Good audio, good camera angles, good lighting. I also like how they are direct and to the point. All the time you are giving good instruction and explanation. I’m learning a lot each time I see one.
Thank you and thanks for watching Rick.
Great video!!! I love these type of videos!
I've had that same mower for 19 years, starts first pull every spring,all I do is run out the old gas in the fall add some fuel preserver and store it in the shed.I do have that lose valve cover leaking oil so thanks for the tip on the lose bolts.😀
The valve cover should get removed once every year or year & a half to adjust the valves anyway
Found the same mower on the side of the road, it had the exact same problem. Cleaned the bulb without having to remove the carburetor. Thanks so much. Perfect video!
On the side of the road? Who leaves a mower on the side of the road?
@@elcomandante9299 that's very common in the South, you leave unwanted things on the side of the road, beside your trash cans
OK... watched the video... now to give it a try!
Great video! Provided the exact information I was looking for. Well done.
Awesome, thank you!
Nice mower for free. I only use NGK plugs as well. Cant beat'em
Nice fix. I repaired an Echo gas powered drill for a person last week that the carb was so plugged and corroded that I had to buy a new one. Could not find an aftermarket for a Walbro WYL56. Had to buy OEM. Cost over $65.00 which was ridiculous. Thanks for the video's.
.
Thanks friend. Yikes that is spendy. At least you know with an OEM part it will work good and last longer.
I believe the Scotts you were working on if I'm not mistaken takes the same bag and frame
good job man
thanks friend!
After trying to clean the carb with two fails I stumbled across this video. Sir you saved the day. I didn't know now the bowl bolt was a primary jet as well. Thanks so much for your valuable knowledge that you shared. I fixed my mower for 0 dollars. I owe you a beer:))
Hi Jeff, I just took my similar lawnmower out of the container where it has been sitting for 15 years. First question was, what do I have to do to get it to run again. It looks quite good but it won't start, thanks for this video, it will surely help me a lot to put life back into it. By the way I am in South Africa in the middle of the country in a small town called Orania.
She cleaned up very nice! I love your junk yard. That would keep me busy for quite some time if I had the money for parts. Quite a few Craftsmans and Hondas, have any Snappers?
Just the video I needed. Have one on how to fix the self propel motor on a similar model?
I do believe those particular models were manufactured with a chute and or a frame and bag not sure as I said have been looking online and cannot find any information
Cute dog jeff
small engine kid thanks! He is 12 years old named Bocephus.
I have the exact same mower. But the plate with the engine model # is gone. Trying to replace recoil spring ... thoughts?
pretty much DIY myself just been and able to find the bagging system mine was conveniently misplaced so to speak thanks again
unable
Great damn vid. Didn't know autolite plugs are pos.
I've never had any issues with autolites
I have a very similar mower, friend didn't want it, hadn't used it in 6 years. Couldn't get the bowl off, but cleaned out the bolt. Cleaned it up, put new oil in, new gas, new spark plug. Started on first pull, ran for about 5 seconds, shut it off and then it wouldn't start again. Not sure what happened.EDIT: Air filter was a dirt brick. Friend said he didnt service it the six years he had it. Guessing the engine may have flooded.
Nice job. Looked like trash but you made a miracle happen.
thanks for watching
shipping would more than likely exceed the value being as I'm in Davison Michigan
has been quite an inconvenience that particular intek motor was a good one it's a shame
Oh yah, I see I told you that. No comment . That's ok. Post a video on how to replace cord on the recoil starter.
Thank you ! Very educational !
I have the same mower engine Briggs Intek 7.0hp on my 7.5hp outboard lower unit .
Could you please tell me the cylinder proper compression test between what and what on this engine ? Thank you so much .
not sure exactly probably 55-65 psi
@@JeffsLittleEngineService
From what I been reading but not quite sure ?
It said 60psi is the bare minimum and could be as high as 90psi . 60-90psi
👍
I have a very similar engine. The plastic filter base is loose and wiggles around even though the mounting screws seem very tight, maybe even frozen. Did some plastic spacer wear out?
sounds like maybe it is cracked
sometimes a little oil leakage can be a lifesaver
Awesome video man! I noticed you have some 14sb or e mowers in the hord? What are the plans for em?
thanks friend! I try to sell all of them (sometimes As is) or restore them and sell or pick parts off of them. The John Deere's are in good shape I just have not had time to fix them yet. I dont know what an "e" mower is. The Hondas?
Jeff's Little Engine Service well john deere made a John deere 14sb and a 14sb which has electric start. I have a newer jx 75 and there was also a je 75 made
Bam
All my mowers are 6.5 or higher except the new one. Because it has a torque rating. And all OHV and all are just the same power wise.
nevertheless way to bring them back
Thank you for your video as I am currently trying to repair a friend's Scott Lawnmower, very similar model to yours in the video. Just wondering, did you happen to see what actual RPM's that it was at after you fixed it?? The issue for me: my friend had to constantly prime gas in order to keep it running, otherwise it would quit. I cleaned the carb, and his air filter is brand new compared to yours, when I started it back up, eureka it runs on it's own but the RPMS were at about 4600!!! I have replaced the governor spring as that was stretched out, but this has not made a difference. I'm at a bit of a loss as to why the RPM's seem so high. There is really not much play with the governor arm. At least now I also know which way the throttle speed is going as he is missing that "rabbit/turtle" sticker that shows in the beginning of your video but is missing as well after the cleaning!!
confirm that the throttle linkage on the carb movesand not bound up. Also, it may need the govenor arm reset/adjusted.
bend the metal tab away or closer the hook attaches too, if not already done in the last 3 yrs!
Hi Jeff can you tell what it’s the valve clearance on the Scotts lawnmower, I will apreciated!
Clearance is half inch intake n three quarters of an inch exhaust. That'll get that kitty a purrin.
You need to get yourself a ratchet wrench. once you get yourself a set and use them you will never use a box wrench again LOL. Also you should try the E3 spark plug. A few years back I was in Sears and I was such a regular customer that people and the tool and yard and garden section got to know me. This one young guy that normally took care of me saw that I was looking for spark plugs. he told me to try the E3 spark plug and that he will give me 20% off and if I did not like it I could bring it back for a full refund. So I picked up two of them for my riding mower. Once I was done with all the maintenance I could not wait to see how it ran with the new plugs. I can honestly say it was a night and day difference. My riding mower had more get-up-and-go then ever before. After that I was hooked on them. I put them in everything I own that has an engine. They are a little bit more money it is well worth it.
I enjoyed your video hope to watch another one soon.
thanks for commenting
Mine which is the same exact one and set up except the carb and everything is mounted on other side of the mower and my air filter sits on the side of the engine or carb I should say not on top like yours
But my problem is if I prime it about 5 times or so it will start and run maybe 5 seconds and die and it does it over and over . I cleaned the carb bowl out and has fresh gas but keeps doing this. Need help thanks
Was hoping u would have removed the carb so i could see what i could be doing wrong or what to do as far as cleaning or replacing
it sounds like the carburetor main jet is plugged or contaminated fuel
@@JeffsLittleEngineService yeah that was actually one of the problems and the little o'rings was barley there and that one that goes in where the needle goes in at the very small one . It was completely gone so I got a rebuild kit and done it all and now it's doing perfectly. Butt it does kinda have a low idle but may clear up idk but until u raise it up to mow the grass it's fine . Just on the lowest idle part it kinda isn't smooth I may throw some seafoam to complety get everything going and clean
Jeff I've been looking for a 21-inch bagging system bag and frame or my turfmaster self Propel 6.5 horse Briggs have any ideas
I have one I think but I am in Washington state
hang in there man you have some nice jewels in your horde
Have the same mower I'm leaking gas from the primer pump I replaced that and it's still leaking, was gonna buy a new carburetor for it is there anything I should try first?
sounds like the carb needs to be cleaned, rebuilt or replaced
should always change plug when you change filter
Do you change the oil in your own lawn mower yearly?
depends on how much it is used. usually every other year
I know it may vary from state to state. But sexing a used lawn more you come across and selling it how much are they worth.
$100- $150.00
We have this exact mower and when we put gas in it, gas shot out of the primer bulb. Any ideas on where to start?
Sounds like the carburetor is flooding. It needs to be cleaned and possibly rebuilt.
@@JeffsLittleEngineService My primer bulb is leaking...what would cause this?
I was given a troy bilt self propelled with 6.5hp briggs. It was left with old gas and wouldn't start. It will start and die with starter fluid. Cleaned carb and main jet still no start on its own. There's not alot of fuel in bowl when removed. Spark plug is a little oily. Any ideas?
clean and rebuild the carburetor
Possibly fuel supply issue, or fuel flow. Try taking off the float bowel, let the float hang down, does the fuel run out ? It could be a clog somewhere between the fuel tank and the carb. Look in the fuel tank, is there gunk near where fuel leaves the tank ? Sometimes there is a screen type filter there, sometimes just a hole, either of which might be clogged. Or a clogged inline filter or shut off valve. How many times can I say clogged in the same reply ? Word of the day.
You're left rear tire is a lil low therefore not providing enuff fuel. Add air n that puppy will start a barkin.
Is the carburetor in Briggs Intek Edge the same as in briggs quantum ?
I think they are different
Does both engines uses the same coil?
I used to have several of them chickens. Can't think of the name but theyr pretty running around. Silkys right?
yep!
What cleaner did you use?
Berrymans
I need a bag for this mower. where can I find one.
I have one here in Camas, WA
U can find one at the bag store.
Wood movie engine or motor excuse me over to a Craftsman deck however they're not far behind
Most likely the emulsion tube O rings are shot.
Jeff you gonna fix some of the other mowers to sell??? And take parts off of
Yep! exactly...
Where are you located wish you were in wauconda Illinois 60084
Camas, Wa
Jeff's Little Engine Service you should open a second mower junkyard I'd be over every day to see what you got
What did u sprayed on the mower to clean it
Luis Torres He commented earlier and said he used oil eater that's available at O'REILLY'S. That and purple power both work very well for cleaning up oil. There cheap too at about $8 for a gallon. Just dilute it with 50/50 mix so no pesky white residue gets left behind from the degreaser.
a product called "Oil Eater" available at O'reillys auto parts
Jeff's Little Engine Service thanks you sprayed everywhere??
Luis Torres been cleaning mowers for years, I use a 50/50 mix of awesome cleaner and mean green both can be bought at the dollar store for a dollar a bottle, that cleans just as good and doesn't remove the shine from the paint.
"oil Eater" biodegradable cleaner
What kind of gas can is that?
an ol skool piece of crap! lol!
What it in the bottle of cleaner there, Jeff? Or is it a secret formula?
a non toxic product called "oil eater"
😃
do you know if that has an auto choke?
no auto choke on this model
dang hard to find parts fer....for me anyway.
how bout you?
Jacks small engines has good parts diagrams online
Jeff's Little Engine Service I’ve read there is a choke return spring though. Any idea where that plays in?
What spark plug for a intek 6.75hp
BKR5E
@@JeffsLittleEngineService installed a champion 71
Not NGK. They're waste of money.
possibly Tecumseh era I'm not sure LOL
Did you ever sell this mower?
yep
however those lifters did sound a bit rattly don't you believe
Hotrodere I just want to take a second to let you know you've commented 11 times on this video.
It's funny. I have a snapper euro platinum with a 7 hp intek motor. , And I have the scotts with a Tecumseh motor. So I have both the engine and the mower on two different entity's. I know, it's mind boggling
Home Depot just as well no longer carry that particular model or accessories
I just, sonofabitch , I'm dumbfounded. Because I see all these videos with the scotts 2199 mowers with the briggs intek motors. I have the scotts mower , 3 speed rear wheel but it has the Tecumseh 6.5 ohvr 120. Starts first pull. No prime. I also have a snapper euro with the same motor, 7.0 hp , that your working on there and I can't figure out which motor is better. The both just rock. Neither bogs down in 10 inch grass. Just confused as to who was using what motor in the early 2000,s
Mower wont stay on....?
probably needs the carb cleaned out
Think could mail me a junker?
I have worked on a few of these intek Scott's mowers and wow what a pos, to me, that briggs engine is the worse engine briggs ever made, till the new Chinese briggs that are out today.
My experience is the opposite of yours. I have had this very model lawnmower for 20+ years and I only had to clean out the carb this year, otherwise it still runs strong.
Autolites r pieces of crap? NGK r the best? I beg to differ.
ok we can agree to disagree.