* Toro recycler carburetor rebuild kohler 6.75 149cc
Вставка
- Опубліковано 28 кві 2020
- complete carburetor filters
amzn.to/3jZ7kKs
todays t-shirt brought to you buy YOUR NAME HERE
amzn.to/3hW85C7
if this video helped you donate a buck or two to my GoFundMe account
www.gofundme.com/f/help-me-bu...
The small engine guys are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
toro recycler,lawn mower,mower,carb,carburetor,rebuild,clean,tune,tuneup,diy,lawnmower,self propelled mower,toro,toro recycler 22,toro recycler 22 in smart stow,toro mower,2020 toro timecutter,how to video,repair video,diy video,how to,lawn mower repair
Tks for sharing! Im 50+ yrs old and only now getting mechanically interested in fixing my small engines myself. This vid got me over worrying I'd wreck the carb and dig into it. Found 1 of the pins for the choke arm assembly had come off preventing the blades in the carb from actuating. Now to pull up the pdf and find the part number i need.
gotta get whole carb sorry
@smallengineguys oof.. well then I can stop hunting for that pin. Tks.
@smallengineguys update: was able to redneck something for the pin. Mower running now. Again thanks for making this video.
Thank you for posting. My mower was slightly different as far as how its connected on the opposite side of the carb. Just 2 bolts holding a bracket on near the spark plug. You were a ton of help with this process and took all the guess work out. You are the man.
Hi what tool you use to remove the 2 bolts?
@@chris-samuel-cesar10mm
Thank you for such a detailed video on cleaning the cab. My mower would run very rough and eventually die when it warmed up. My first thought was that the choke was not opening up but after checking the automatic choke with a heat gun it work fine and the choke was in fact opening up. My neighbor suggested that when the choke opened that the engine was probably running too lean and that cleaning the carb might help. Your video gave me the confidence to clean the carb. In addition, I also remove the actual jet and the tube inside and used a wire and carb cleaner on those items as well. After cleaning the carb and re-assembling the mower it is running great. (My carb is slightly different that the one in your video.) I would have never cleaned the carb by myself without seeing your video. You saved me a lot of $$$. THANK YOU!!
Amazing video! I just rebuilt the carburetor and saved myself $100!
Great video!
I had a problem with my mower that wouldn't start and I didn't want to go to the repair shop. Luckily, I came across your UA-cam link. The video and narration are very clear and helpful. I was worried about disconnecting the carburetor spring and links, but it turned out to be easy. I successfully removed and cleaned the carburetor and put everything back together. The mower runs like new now. I added a fuel stabilizer and a few ounces of Sea Foam fuel treatment to the gas. Also, I found out that my local Home Depot has parts for this mower as well.
Much appreciated. Worked like a charm.
Good vid. Your Toro is more of a.hassle. to work on than mine.
Exactly what I needed to get my Toro running again. Thanks for posting.
Glad i could help
Thank you so much, fixed my lawn mower. I was worried because its brand new.
Glad I could help
This was a really good video. I'm going to try to clean my daughter's lawn mower carb (just like this one) since it's "surging" up and down when running. The process to get the carb off of the engine was very clear - - and really helpful. Much thanks.
Easy stuff you got this!
Thank you for posting!! Never did any work to any type of engine and I was able to clean my carb!!! Really saved me hassle (I have no truck to transport the mower) and $$$!!! Also made me feel like super woman!! Thank you again!
Great job! love getting these stories from women!
Thanks for clear and easy to understand how to replace Toro recycler. Very useful demonstration.
Glad it was helpful!
Good information I just bought one used and it cuts my grass like a champ
nice!
Good job
Thanks
Just picked it up off craigslist $40.00 it runs about a minute I found the carb “Amazon “ about $20.00. You got the exact mower I have Kohler 6.75 hp 149 cc. Thanks I might have to back to your video when I get the carb thanks .
Great video!!
Thanks!
Very helpful, simple to do, and easy to follow instructions. Thanks.
You're welcome!
Great video, thanks for posting! It helped me to figure out how to remove the choke arm.
Exactly the video I needed. Saved me a bunch of money. Thank you!
Glad it helped!
Great presentation. Simple and exact.
Glad it was helpful!
THIS WAS EXACTLY WHAT I NEEDED ! PERFECTLY SHOWN AND EXPLAINED. iF THIS DIDN'T WORK I WOULD HAVE HAD TO BUY A NEW MOWER ( WHICH BTW ARE ALL FRIGGING CHAP CHINESE CRAP!) THANK YOU SO MUCH !!
Thanks so much. Was confused how to get linkages off without bending lol
Happy to help!
Great job. Just what I needed.
Glad it helped!
Nice and simple vid! Thanks!
Glad it was helpful!
thanks, hope this will do the trick, hadn't seen mine spilling gas all over the garage before but I've replaced a lot over the years.
Good luck!
@@smallengineguys worked like a freaking champ =), I should just get a replacement carb since the o-ring was getting grungy and 10+ years old...but wd-40 and some carb cleaner we are back running. Might've been a clog on the airline too but I blew everything out to be safe
@@derekp6636 nice!
Pretty helpful my assemblies a little different so ran into some snags but thanks a lot.
Glad it helped
I replaced my with an Amazon one and it seems to be reving a little too high. Any thoughts are tips on that?
Very helpful. Thanks
Glad it was helpful!
I have the same mower but have gas going into the air filter ??
Thanks bro step by step
Good video. I've watched a few and they just missed the mark on aspects like very clearly seeing what they're doing. I was able to see things clearly and I am feeling more confident in replacing my carburator now.
You got this!
@@smallengineguys i did, it's done and the grass is cut. So happy.
Thank you, y'all rock ☺️
@@Arthurian. great job! Feels good right! Crack a beer you deserve it.
Great informative video, I learned a lot , if you decide to replace the carburetor is it necessary to go oem or something universal would do the job
Buying aftermarket is fine but you need to pay close attention to the linkages. Kohler had a couple different styles of carbs for the same motor
How do I find the right carb bowl gasket and where? Do I need a certain number? I have the same mower and I need the bowl gasket because it’s leaking gas.
Where can I buy the carburetor spring and link replacement. I’ve looked and there’s so many options I don’t know what to buy :(
Great video! Where do you buy a fuel hose? I have tried 1/4 in. reinforced fuel hoses, but they seem very hard to work onto the carb/fuel tank. The one shown in your video seems more pliable. Thanks.
amzn.to/3KfOw7Q
I have rebuilt a very auto,Ford tractor down draft of course Holly always a break sheet however dumb a s s Kohler not available the dealer said that they did not have òne I asked if they had o e in manual that I could pay for copy said not possible he did wish me good I always felt that I would be able to do this but I wanted you to know how much I appreciate your video it will take a lot of speculation out.
You are a good speaker as well as,instructor thank you
common carb and very easy to clean
Good fix
thanks
Do you ever remove the main jet and clean the ports in the emulsion tube?
yes all the time. although after i started using this acid it isn't as necessary.
Mine has the issue where gas pours out of the air filter. Float good, needle had some crud cleaned it, spring was bent so I straightened it, still leaking. I will clean the seat. Any other stuff to check?
needle seat or float. one is bad or dirty.
Any clue where I can get a replacement of one of the gold pins in the linkage?
yikes no. ive used a small screw before but it is a new carb if that doesnt work
Would cleaning out the float needle area fix a my gas leak problem? The float won't sit level against and when I push it up shut with my finger the leak seems to stop
Sounds dirty
@smallengineguys I took it apart cleaned it. Put back together still leaking. The float doesn't sit flush and I think the needle isn't properly sitting in there the spring seemed to have lost its springiness.. not sure if I just buy a new carb. ?
I just got a new carb kit for 17 bucks. The gaskets are falling apart anyway. So I may as well
Annnnd..
That fixed the leak. It was the float and needle buuut finding just the right needle and float kit was a pain in thr ass-embly, so a new carb for 17 bucks got me a whole new carb kit with fuel line filter and starter. Didn't even need to swap out the fuel line. Just carb and leak gone ( new needle, float )
Thanks for the rebuild vid. I'll be giving mine a shot tomorrow. Not a fan of the autochoke system
they work great. just do what i showed it will start first pull.
@@smallengineguys I'll give it a rip. But I might need some shine to celebrate 🤣🤣🤣
@@smallengineguys I was going to just buy a new carb, but that seems wasteful
to easy to clean but sometimes a new one works best for certain people
Hello - Great video...im trying to find the parts manual for this mower...mine is missing the Air filter and its outter plastic cover...any idea where i could find part numbers for them..Thanks!
amzn.to/3tzRzPL
@@smallengineguys Thank you!
best buy girl scare me 🥺😧
👍👍👍👍👍👍👍👍
Do you have a part number for the choke linkage arm? I need to get a new one.
amzn.to/3aM9Dxx
amzn.to/3aJl3SQ
Thanks. I found those two but I needed the one from your video. On the xtx675. Which i think I found. Thanks for the reply.
Thanks - great video. I have done Briggs and Tecumseh's but never one of these Kohler's
your welcome
Where can I get the little pin that holds the plastic piece in the bowl? I lost mine.
amzn.to/3z6Foyk
Thank you
Where does the other part of the throttle attach too
Governor rod on the engine.
I cleaned my carb, but it's still surging. Any suggestions?
gotta do it again. sometimes even i have to do it 3 times. make sure gaskets between engine and carb are good
@@smallengineguys okay, I cleaned it about four times now. It idles fine now but for the first 10 seconds it starts rough with a little bit of black smoke and surges.
Hi, great video! any chance you have a crb part number?
amzn.to/3jZ7kKs
The carburetor that you put on the description and link, is that a good carburetor for the coiler motors
The carb i put in the link is for this kohler motor. It works well.
@@smallengineguys ok thank you I have a toro 20377 and engine is a XT675 only thing is my filter is longer Well it still work love you videos man I just subscribe
@@junebug3058 it should work but look closely at your choke mechanism on your carb and the choke mechanism on this one. Kohler used 2 different carbs and that is the only difference.
@@smallengineguys ok I’ll check
@@smallengineguys thank you
Does 14k gold testing acid truly work?
it works so amazingly. changed my life. i rarely need to replace carb now.
Didnt u forget the outer gasket or is it not really important
You want it it helps keep dust out.
Lol