Best Keurig 2.0 unlock! Two simple steps with NO MODS!
Вставка
- Опубліковано 7 вер 2024
- Easiest possible unlock in two simple steps! With no mods!
I also show a non permanent mod for re-usable k cups.
I discovered the technique with the k cups after playing with my new Keurig 2.0 plus model for about half an hour.
Please leave a like if you enjoyed/found this helpful and subscribe for more. Thanks!
Thanks so much!!!! I just tested the first method and it works!!! Thanks so much!!!!
Can you brew the carafe, it wont let me, it keeps saying insert carafe.
Thank you sir, just picked up one yesterday and was about to lose my shit when the $100 coffee maker I just bought was going to tell me what size was best for me. Worked like a charm.
Omgosh, so simple. And no cutting green wire. Thank you.
I have a keurig 2.0 and used a reusable carafe pod I purchased on Amazon, no problems with the ooops. As soon as I closed the top this menu pops up. Way more size selections and I don't have to use the carafe. My 2.0 sizes go to 18 oz. now I can use my coffee cup instead of the carafe and fill my cup to 16 0z. on one round. Love it plus I can use my own grounds and save money.
I have the Keurig 2.0, K250 Plus and dittos on exactly what Lu Lovett posted, using the orange reusable carafe pods.
I couldn't get the right spot so I just taped a piece of the label (?) to the top of the re-usable k-carafe. Now the experimenter/hacker in me will find the right spot and perhaps a non-taping method to make it better. Couldn't have done it without your explanation of why it works! Thanks!!
I just tried this and I can't close the lid
Kool. I was messing around and found the feature but then it did not do it again and I did not know what I done. Thank you. Although the reusable cup I have does not fit good for the extra menu , it makes water get all over. Thank you
Super awesome. Helps me with a 14 ounce travel cup with k cups for work. Very much appreciated.
I've had the Keurig 2.0 for years now and have never had to do any of this to get my 12oz cup of coffee. I used my refillable k-cup once and set the level to the 12oz and since then even if I use a regular disposable K-Cup it stays at the 12oz setting so no need to cut and tape anything over the sensor.
Thank you!! I just tried it out and it worked!! I can now make a larger cup of coffee !!
Perla Vazquez You're welcome! Thanks for letting me know it worked for you.
You did an awesome job actually and thank you for sharing.
YEESSS!!! Worked for me! My co-workers are very happy now, more coffee!!
Wow! Very easy to understand. Thank you for sharing this information.
I have never used OEM K-cup pods. I have the one I purchased from Big Lots, and have not ever had to tape anything. All options where opened when I did the trick you recommended with the sliding the pod insertion location. Sliding that lever and placing the pod into the spot and it opened all the other features and options.
S. Evelyn Jackson awesome! Thanks for letting me know it worked for you too.
MY DUDE! Thank you.
Worked perfectly thanks 👍🏻
As, I’ve been trying to find a work around for the full menu brew screen to pop up and watching ur video and others - not one worked for me - the EASIEST way is to use the pod clip holder. I had taken it off the K-cup basket but re-clipped back. U can put a K-pod into it so full brew screen menu will also come up. This is the pod clip that comes with ur purchase; this. (One videographer said to toss it. Bad idea.) Others use a 🧲 while the pod clip is the work around! So easy!
* Of course, the pod clip needs to be adaptable to ur Keurig.
Can you brew the carafe, it wont let me, it keeps saying insert carafe.
U did the best job at explaining and fast and to point . Does this come in pearl whit?
Thanks for your help. Works perfect.
well i tried the first hack and i cant lower my handle.. dont want to force it so i cant get the new menu :(
Pulling back the piece in front does not work on my newer Keurig 2.0. You cannot close the top if you do that.... you never get the full menu.
This did not work for me, I have the exact Keurig
Danielle Ayala that's strange.. It takes a bit of trial and error of taping the piece of lid in the right spot sometimes. It took me a few tries before I got it in the right position. Works fine once you do.
I tried the first hack on our Keurig 2.0, and the coffee grains all spilled out and were dumped into my cup.
My keurig now only gives the hot water option, anyone have any ideas?
First one didn't work I finally got the lid to close but it displays the normal menu not the new one?
Wow that was easier than I thought
I don't understand why that full menu isn't available unless you do the hack. What's the reasoning behind that?
Keurig was supposed to have released this machine back in 2014 with all of these features and functions. I believe they decided to put the brakes on the non branded k cups to keep their revenue high. Which only infuriated the consumer. I purchased the 2.0 550 in 2014 and waited until the warranty expired then I took two screwdrivers and unlocked my machine permanently! I’m still using it today and it’s like new!
My 550 is still working after 10 years and I unlocked it myself after the warranty expired and I’m a 64 year old woman! 😊
Worked on my k200 for coffee, thanks! Do you have any tip on doing the same but for water? I tried cutting the bottom and cleaning out my kcup but doesn't work the same way. Maybe the weight doesn't hold the needle well?
iMinouBean hi, it's most likely flexing more at the bottom of the cup since it's been cut and not holding back the needle where it needs to be to activate the full menu. I would try just hollowing out the cup by removing the filter portion.
does not work, will not shut
Great!....thanks for the hack, love it.
Thank you
No luck on our model. Thing won't close. :(
Ah well, back to cutting out donuts from old kcups to dangle around refillables (If it was up to me I'd tape it, but you know how it is. Got to compromise to keep the peace.)
Doc Savage lol! I hear ya.
I got loads of grinds in my coffee
Mine won’t close doing that
Well I'll be a S.O.A.B! I just spent $12 bucks for the 2.0 reusable pod. Bastid!.....lol
I got it to work once and now i cant get it work and it keeps hitting the the clip any ideas ??
I got a k200 i just wish I could get a 12oz cup of coffe out of the damn thing what a stupid design good video though
Nice. Thanks
It didn’t work for me, and I just purchased this keurig because my 7 year old Keurig died this morning. I need at least a 12oz coffee in the mornings..help
Marilyn Roman hey sorry It didn’t work for you. I recommend returning it and getting the model above which should allow you the larger sizes without mods. Even the aftermarket re-usable pods have the larger size feature.
Tried this method. Didn’t work for me.
Can you tell me if there is any significance to different colors of reusable k-cups For example the Carafe reusable all seem to be orange. The smaller reusable k-cups are purple or red. I understand the sensor is reading and looking for the color.
I have experiement with colored paper using bright orange and pink and have it read it successfully. I noticed a carafe k-kup has a purple or green dot. This makes me wonder if your using the orange reusable carafe cup should you use a purple or green dot?
Ken sorry for the late reply. I haven't tried playing with the colors I just leave the piece of the lid of the k-cup taped to the sensor area.
I made up something using some bright pink/orange looking paper. I cut it in the shape of a key and made
a hole at one end that fits perfectly over a circular area with the end of the key shape paper placed on
top of the lid. This gives me the option of stock menu or full. This is a bit rediculas we have to go through this but so be it.
I couldn't agree more, it is ridiculous having to do this stuff just to brew whatever you like.
I have never used the Carafe pods and was able to unlock those features with a regular k-cup reusable. However, it would be best to get the k-pod for more than 8oz. It would allow you to add more coffee. I will be purchasing a k-pod for the k-mug and k-Carafe.
The trick is where he points out that you slide the lever down. Now you place the pod into the holder and slide it down just slightly and that will open the additional features. You will need to use a butter knife to remove the pod.
To remove, just slide the lever again and take the knife and place it below the lever and just slightly pry up and it will slide the pod up so it can be removed.
You don't need that. It is just a matter of inserting the reusable pod correctly to open up the additional features. There is no need to use extra effort and create anything to make it work. You didn't need to do this. The trick was finding the triggers. The trigger for the additional features was sliding the lever to allow a larger/longer pod into the device.
Sometimes we overthink things, and do more than we really need to. WE overthink things. It really is that simple. WE just refuse to believe it.
Good shit, good shit
@techgeek I tried so many times to do the first method for a larger cup of coffee but it didn’t do anything .. can you help why?
dina morales Hi, sorry I don’t know why it doesn’t seem to work for everyone at least not yet. Seems to work for most with the same model. Might be a change with the units depending on manufacture date.
tried the first hack and it did not work for me I have the keurig k250
doesn't work on my K200 Plus
Can you explain the numbers on the menu?
This is the best mod so far.
Debra Collins Thanks!
I tried your first method by holding the clip back then putting in the k-cup in for full menu. It did not work for me?
Matt Loucks hmm, strange. It works with my K-200 only with the plastic kcups though because the cup has to be long enough to hold the puncture pin at the bottom in front of it. Just make sure you have already opened and closed it with the cup inside to puncture the bottom before you do it otherwise it will be a big mess.
Hi how are you doing.
I was wondering if you could help me fixing my k155
It's not working because that is a sign that pop out saying the machine is overheated. And it doesn't go away or doesn't let me do anything, it is blocking me from doing anything on my Keurig.
Any help will be appreciated, please save me.
Lol! Hope you are going well as for your keurig I’m afraid it’s pooched. Seems like it needs a new heating element in which case you are better off just replacing the whole thing unfortunately. Good news is with the holidays here you can probably get one on sale cheaper then you would the rest of the year. Cheers
@@TechGeekOG thank you so much for you help.
Marta Lopez no prob!
It didn't work for me😔
I was able to do this for 3 times and after that it won't let me do it....any idea on why it's doing this?
Jessica De León hi, it must have moved out of position if it's the taping of the label method you are referring to.
TechGeek Hello, Actually it was the first method that I tried & it was working for the first three times I did it and then when I tried it again & now it won't do Anything, I've tried it several times and just won't do it. I was hoping you could give me some insight on perhaps another way. I was really enjoying the option of making a larger cup. Thank you for your time.
Jessica De León it's strange because I just tried it again on my own machine and now it does not want to do it as well lol!
I will try to find another way...
TechGeek.... What! REALLY? 🤔🤔🤔
I wonder what it is? Maybe they hacked our Keurig? 😓 I tried unplugging it and nothing changed.
I also tried your method but it didn't hold the buttom lid open on my K425
hmm.. mechanics of it should be the same.
uhm, why not just buy the keurig my k-cup for the k carafe?
I used the trick of opening the full menu and it worked fine except that my coffee was full of grounds without the needle in the bottom hole. Any ideas?
Barbara Holley hi! You have to close it with the pod in normally so it can puncture the hole in the bottom then open it and re-install they way you did to unlock the full menu.
I do that, but without the needle to hold the hole open, it closes slightly and forces the grounds out the top with the pressure. I have the new K600. I wonder if that makes a difference?
Barbara Holley hmm, not sure why it would do that because the hole would be open at the bottom and without the needle there it should be slightly less pressure. Also it should still be aligned in the same position for the hole at the top. Strange.
It's quite frustrating. Today I even put three holes in the bottom next to year other and they all closed down and forced coffee out the top! Thanks for getting back to me.
Barbara Holley lol! No problem, I'm surprised it still did that.
How about leaking water from underneath???
Hmm, must be damaged or defective..
I want it hotter then 180 and don’t know how to change temperature
In the settings it only has two options. You set it for the hottest one, and that should be no hotter than 200 degrees. Anything hotter would leave teas and coffees too bitter.
im getting a water pressure error? ugh
Jamie Lyn Barton same here on my plus model ..bummer
Guess who forgot to put a hole in the bottom...
Proce lol!
Just bought a new one this does not work.
Kyle Carroll Thanks for letting me know. Maybe they made some type of update to the newer units...
Add a waterline to your Keurig so you can fill it directly! ua-cam.com/video/v6Jru5Csqw4/v-deo.html
Not working for the plus model
Which model is it. Is it 425 or 525 and higher? If so, then it will work. Potentially it depends on which models you have whether or not this will work.
@@SEvelynJackson I just bought on Amazon the K 575 platinum on cyber Monday. Will this work on that? Thank you so much for your help, I have been driving myself insane, and I'm already in a wheelchair. LOL
the new clip is not a plug and it is much better than the clip as does
not falls off, lock in secure sold on amazon and ebay now
www.amazon.com/dp/B075DLCG54
or here www.ebay.com/itm/322761520103 we try it on several units all over the office and works great.
These hacks are always such bullshit. Just tried it exactly as he demonstrated and it didn’t work.
i did not work for me
AlphaPlayz me either... :(
Did this it works made a 16oz.But I got coffee grounds everywhere
teela1011 you have to make a hole at the bottom first by opening and closing. Not sure if you skipped that...
I made the hole first then got coffee grounds everywhere too. Just want my 16 ounces!
If your using a reusable pod. You put too much, or you need to purchase the reusable k-mug pods or even the k-pod Carafe pods. You can purchase them on Amazon. You may want to test different coffee. I found that Cafe Bostela works well and I don't have to use a lot. My reusable pods came with a spoon. A small one and I add no more than 4 of those spoonfuls and my coffee is perfect no grounds. It is also a finely ground coffee.
You have to test different types, and ground coffee to find the right one for your palate.
I have these, and purchased them from Big Lots. But Amazon has them.
www.amazon.com/dp/B00Y3G8D3I/ref=asc_df_B00Y3G8D3I5319702/?tag=hyprod-20&creative=395033&creativeASIN=B00Y3G8D3I&linkCode=df0&hvadid=198065490425&hvpos=1o5&hvnetw=g&hvrand=5912550429739060628&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009954&hvtargid=pla-391119062776