Build an Onboard Air system in 15 min on a Jeep Wrangler

Поділитися
Вставка
  • Опубліковано 18 жов 2024

КОМЕНТАРІ • 30

  • @JDBeastmode
    @JDBeastmode Рік тому

    I was piecing this together and found your video, it’s amazing to think you have a unique idea and then find someone has done it because then you can just follow their lead.

    • @BenandBrandi
      @BenandBrandi  Рік тому

      Hope you will subscribe and follow our content! Good luck with your build!

  • @Chiefs_Adventures
    @Chiefs_Adventures 3 роки тому

    Sweet...watching and waiting to hear how it holds up with the heat. I like where you have the CO2 tank! Nice Job!!

  • @John-yb2xp
    @John-yb2xp Рік тому

    7:29 You’re first babe “whaaaat?” 😂

  • @raymcm123
    @raymcm123 Рік тому

    Great video! Has the heat been a factor in the compartment?

  • @chrismorse7513
    @chrismorse7513 3 роки тому

    Nice set up.

  • @pistachiobandanos904
    @pistachiobandanos904 2 роки тому

    nice set up. I'm considering using the tub as well. May I know how effective it is having the tanks ? Does that volume air tank help with airing up? Thanks and great vid!

    • @BenandBrandi
      @BenandBrandi  2 роки тому

      It does! Used it today.. nice having a build up of 120 psi instead of just the consistent 70ish the compressor makes.

  • @stevestewart3816
    @stevestewart3816 Рік тому

    I'm looking for a similar set up on my 2016 Sahara jku but in my tun there is a subwoofer.

  • @michaelriddle7303
    @michaelriddle7303 Рік тому

    I had an idea like that with that exact air compressor. I was worried how big of air tank I can ues with that air compressor.

  • @TwoFeatherChannel
    @TwoFeatherChannel 3 роки тому +1

    I hear it a lot by other youtubeies saying they use the compressor to Air Up and Air Down
    How exactly are they using it to air down. Is the regulator the device that stops it from going down too low?

    • @BenandBrandi
      @BenandBrandi  3 роки тому +1

      yep. you can set the regulator and it will either bleed the air off or add it depending on what your pressure is.. pretty awesome really.. however for airing down the most easy method is a device like deflators by staun.. we love them!

    • @TwoFeatherChannel
      @TwoFeatherChannel 3 роки тому +2

      @@BenandBrandi I have a couple sets of deflators J.T. Brooks and Staun. That is cool that the regulator works both ways though.

  • @philbrennaman4572
    @philbrennaman4572 3 роки тому

    Good job, like it.

  • @jaredinark
    @jaredinark 3 роки тому

    Nice setup! Maybe I missed it but did you leave the ARB filters on the compressor or did you run them outside the compartment?

    • @BenandBrandi
      @BenandBrandi  3 роки тому +1

      They are on the unit. We will see how that works out for now.

    • @maxdominguez5543
      @maxdominguez5543 Рік тому

      ​@@BenandBrandifollowing up on this. Did you end up having to run then outside of the back cubby?

    • @BenandBrandi
      @BenandBrandi  Рік тому

      We did.

  • @pphcramer
    @pphcramer 3 роки тому

    That candy blue Co2 air-up system set up looks sweet! Where can i get that?

  • @greghull3189
    @greghull3189 3 роки тому

    Nice work!

    • @shannonchaffin4505
      @shannonchaffin4505 2 роки тому

      I like the look of the setup and am considering something similar. I wanted to check and see how the ARB is holding up in the compartment? Do you leave it closed or open it up for cooling when in use? Does it ever shut off due to heat?

  • @phillyb4588
    @phillyb4588 3 роки тому

    Arm pot sweat lol

  • @jasongardner1910
    @jasongardner1910 8 місяців тому

    How did you hook both tanks together

    • @BenandBrandi
      @BenandBrandi  8 місяців тому

      Just ran a piece of air hose between them