(EP9 Kipa 28mm Flat slide carb install on CG250, RPS condor test ride. Kipa better than Nibbi?
Вставка
- Опубліковано 6 жов 2024
- Kipa 28mm Amazon link: amzn.to/3JUDQfr
30mm Manifold boot needed for install: amzn.to/46KANQJ
Testing out the Kipa 28mm with power jet, comparing it to the Nibbi 28mm I put on a few months ago, is it better? I think so. Says for 2 stroke but will work for 2 or 4.
Motocheez Keytag: www.motocheez.com 't even have to change the jets it came with! 115 main, 38 pilot
Condor 150 Purchase link: bit.ly/3tFJtWy Use MOTOCHEEZ during checkout for discount! Parts and info: www.motocheez....
TODAYS CONTENT:
Beautiful day for a ride, Offroading to Samurai Steves cabin, Motoriders secret fishing spot. My gopro screws up for about 30 minutes, ride down hill and catching up with Motorider2018
ABOUT THIS BIKE: This Condor has been engine swapped with a CG250 off a TBR7 as of 4/1/23 here is the video • (E6) RPS Condor 150cc ... . Prior videos were of the CG150 engine.
MOST links will work for all CG engines unless specified otherwise.
EARLIER MOD LINKS for CG150 and CG250:
LED headlamp: amzn.to/3GlmUwC
Trickle charge connectors: amzn.to/3UcuhfD
Copper header exhaust gaskets: amzn.to/3Uk8Rxo
E3 Sparkplug: amzn.to/40K1oKh
KIPA 28mm flatslide carb: amzn.to/3nLFSq7
30mm Manifold boot needed for install: amzn.to/46KANQJ
26mm Nibbi carb: amzn.to/3CJHgOZ
28mm Nibbi Carb: amzn.to/3rHfgVL Nibbi
Pod filter: amzn.to/3CFWvs5
30mm Intake Manifold: amzn.to/3RHIJcV
Shinko Nobby Offroad DOT tire set: ebay.us/OaEfRl
428-16 20mm front sprocket: amzn.to/3QDSZnd
Re-jet Stock carb main jet kit: amzn.to/3QBXYEL
#rps #condor #chinabike #engineswap #grom #minibike #xpro #hacks #mods #nibbi #thumber #taotao #modify
Now I understand why one of my carbs wasnt working, power valve had a screw for more juice also I didnt get it. NOW I DO SO THANKS!!!
8:38 dang that thing BARKS!!!
Looks good, i saw the condor in the background of the last video and was hoping we would get a video on it. Thanks for posting.
That bridge has seen "more gooder" days. Sheesh, it took a beating.
Love the Condor 250 ! 😎👌I should be back to work in a few weeks and "allowed" back on the bikes . 😐 Rode the Shadow around the block a few times yesterday . 💪
Awesome!! You'll be ready when I get back down
I'll be ready for sure ... I just gotta get the bike ready too . She is in need of some attention . Need a new tire on the rear , a clutch cable , lowering link and some handlebars . Won't take me long to get it back in order though . Can't wait to get back in the woods ffs !
Yes!
Cheeeeeeezeee yall really need to go the the....smokey mt small bore rally. Next year. We took our z125.s And I rode my buell townsend tennessee to tail of the dragon to Gatlinburg its a great time man. Bring a group with you. Cuz it's a blast. Best 11 day vacation I ever took and it ended with 3 days of mini bikes cutting corners in the mountains 🎉
I'd love to!
@MotoCheez look it up it's first weekend of June. Idk if they have posted a date for sure yet but was a blast. I posted some vids of 💩 we did through the week. Only one short about he rally on day one. But plenty of real youtubers posted all kinds of stuff. I can't wait for next year
i want one now..... happy to see you well..
Thanks
Kipa seems like a good option. Picked up a bit of grunt. The Vette would be nice to cruise in Florida. Maybe load it on the Amtrak Auto-Train and hit the coast.
It would be an awesome cruiser in FL
That thing is faster than my TBR . You must have some different gears on that thing.
Did you do carb work on yours?
@@MotoCheez Yeah shortly after I got the bike I noticed it not being right so I messed with the carb trying new jets but it would always hic up on acceleration. So I put a amazon carb on it and it has run great! It just is geared too low I believe. I did put a higher sprocket on the front I need to do the back. It's good for cruising 45-55. The speedo went out pretty fast and headlamps burn out fast. Actually I don't want to go fast on that bike the brakes aren't that great It just doesn't feel that safe at 65-70. Sometimes I feel like the frame could crack in half!
@@joemcintyre2090 👍👍
You gotta put one of those carbs on the Recon.
I think you're right!
Seems to be a pretty good carb for your application. Scoots along nicely for a 250cc bike. 73 Earnest K5EWM 👍
Throttle cable is pinched or stretched on the right of the fiel tank (theres a bracket there).. I have the same problem with my handlebar risers.
Killer carb update
14:55 not true. The vader 150 is slightly bigger than the grom. Not only cc wise but also size wise. The body fairings of the grom are smaller.
19:00 i think you just have to lower the needle clip one slot (to get the needle out a bit quicker). It'll richen up the low rpm mixture.
Slightly yes!
I put a 28 flat on my KP 150 it ran great
Good info
looks like the S/U carbs on my MG
Woo hoo let's go rippin on the Condor!
And a great video again!thanks
Nice carb, I've always used the Nibbi, I'll have to check out the Kipa, seems to be good quality, like the flat slide too.
I put one on whitey w the ZS190. A couple years ago, Been great
@@MotoCheez whitey was always one of my favorite bikes that you had. That 190 seemed to run really strong!
It is fast! Less torque than the condor, but faster top speed.
I have to take her out soon!
@@MotoCheez I’d like to see it again, I recently bought a Venom SS3 which is. KP mini 150. Those small bikes are a lot of fun. I never realized how much fun they were until I bought one. The SS3 has an overhead cam engine and is pretty fast too
They are a blast!
All ye Groms in Cheezy's realm ,give up all hope!
That's right!
🔥🔥🔥🔥🔥👍👍👍👍love the videos might have to get that carburetor for the raven 250
Only problem is adjustments are on left side. But you can get to them on the raven
ya🔥🔥
I think a 1/4 throttle don't work well in daily drive. I didn't like mine. It made it hard to cruse. Gave a hopping throttle when hitting bumps.
You're probably right
Nice! Is it my imagination or does it sound slightly more aggressive?
It does to me too
A very winning combination, too bad you can't order one like this from the factory... thanks.
Agreed!
That bike would be better than a new Honda XR150L I think. But those new. Honda bikes are nice for $2,800
I need to see you do a carb change on one of those old 6 cylinder Honda's 🤔 Just think of how great it would be to be able to shrink your arms and hands down by 50% to get in those tight areas.
Like the old Gold wings? I believe that two carbs some probably had six
@@MotoCheez Honda CBX 1000
Oooooh. Ya
they drive like that in fl all the time i hate when they slow down to 35-40 on a bend in a 60mph zone
At least maintain speed!
Saawweeetttt!! That bike looks like it would keep up with my klr250 Good stuff!!
It might! 😁
Have you looked at or considered trying the xpro titan dlx ?
I've seen it. Very similar to the hawk DLX
I think the looks of that one is very cool and yes that reminded me of the hawk dlx too. Awesome video I might give this carb a try on my tbr7. Wish I lived closer to you. Would love to bring my tbr7 and do some trail riding with yal!!
I'd be up for that!
I wonder if we tune these carbs different dependent on our beliefs of things such as the earth being flat, round, hollow, or ruled by reptiles. I think a 135 main and a 45 pilot covers it all though
😂🤣😅💪🧀🧀
My wife said that you sound like me driving.
🤣😂😅👍
Will this carb brand in the 26mm work on the condor 150cc was wanting too go with this one since the other one the idle hits the frame
Yes, it should definitely fit
You're doing 47 indicated (~45mph gps) at 5k rpm? What sprocket sizes are you running?
I believe I had the 17t on front. Stock rear
Hello ! Wondering if you have any videos stripping the magician down I could also check out? I’m new not sure what I’m doing already problems on first day
What do you mean?
Best I have is assembly video
OH, and by the way.. I would gone under the arm and crossed that bridge...!!!
I would have but there was a tree in other side with no way around it. Check it
@@MotoCheez Ha ha ha... I am used to Dirt Bikes anymore and that tree was not big at all... We bump over them all the time...
@@captsam54 what! Was like 14" diameter... Condor has small tires 😅
What camera did you use to record your ride?
GoPro hero 7
@@MotoCheez It looks really good. I was hoping you were gonna say it was one of these off brand cameras you've been trying. I received a gopro 10 as a gift about a week ago. I took it out one time riding and in 10 minutes it over heated, it was losing connection to remote intermittin. Long story short I had to return it. Went with a gopro 9 for the time. When you google the over heating problem with gopro they have had major issues since the 8 and their answer is turn off all the features of the camera and dont record for that long. Or dont use the weather proof case. Keep up the awesome work, love the free content.
@@SeanSR I had to get the aluminum case for mine, overheated a lot in FL
Man! That bridge is trashed!
Carbie time
Excellent job.. That Bike sounds Rad.. and is fast.. for a "Grom Clone".... Probably faster than a Honda Grom... I do not profess to know anything about them.. cept thier small...
Thanks. Definitely way faster than a grom clone. Billee took for a ride and I should have recorded his reaction, said way faster than his.
Throw a 18t on it
Won't fit, 17 sometimes barely fits
i have a cg125 with a nibbi 22mm setup right now and i bought a intake boot to try pwk carbs what would be too big for a 125cc?? i wouldnt change it but i have the engine in a 4 wheeler i built and i need more a little clearance for the air filter
22 mm PWK should be fine
Idk what happened notifications got turned off 😕 UA-cam. Wth.
Yep, dozens of people saying same. UA-cam don't like me 😁. Happened a lot over the years
@MotoCheez I'm kinda mad about it lol it's bull shikaka
I've contacted them about it a few times in the past, they don't care lol
@@MotoCheez #1 rule of humanity.... most people SUCK 🙄
Unfortunately
Where does the red hoses go??
From the bowl to the power jet
@@MotoCheez there’s two more hoses and idk where to put them
@mylesmorisak9091 they are vent hoses, there should be two more open nipples after you hook up the fuel line to the bowl
@@MotoCheez Awsome thank you
What carb do you recomend to upgrade in my cg150
amzn.to/3YPaCor This carb will work the best because you can adjust idle from left side, but you're going to have to get this intake amzn.to/45jpQoi and this air filter
amzn.to/3E3ICE1.
Probably have to start with the smallest main jet, I did not try this car on the CG 150 but I'm putting a bigger carb on my 250 now and my old one was similar style and it worked great
@@MotoCheez thank you 🙏🏼
Is that like a chinesium honda grom wanna be?
Yes!
I think you may already know that you had a scammer in the previous video comments .. Because of a giveaway. 😂
Yeah, I just had to remove two different accounts trying to scam with my icon. People cray cray
Polini pwk is better than keihin
Agreed. I think it's the best of the budget carburetors to be honest
@@MotoCheez better quality aluminium and nop tikitiki the slide 😋
It is considered a racing carburetor so it's a little more finicky
@@MotoCheez sure for daily carb is a keihin pe…
Yo!
1st comment!
@@MotoCheez damn straight!!!
Want the keytag?
I lost the one I got a long time ago... so I mean, sure!
Sounds good. Send name and addy to motocheezmail@gmail.com and I'll send one out
Beep
Meep
Does China sponsor this channel? Seems like you are one of their people that they use to promote sales....? Not sure how honest you can be with free sponsored stuff
No, and for your information I purchased this carburetor and many of the items that I do reviews on in my videos. Some are sponsored. And if you watched my videos you could see that some of them don't get a good reviews so I don't understand why you wouldn't think they were honest.
I would love to do american-made products but they don't make carburetors and most of the Harley-Davidson parts are coming from China sadly
@@MotoCheez I wasnt implying your dishonest. I said it could be dishonest if all these products were sponsored. I love the channel I was just noticing how many of these chinese bikes you ride. If you add up the price you could have a Honda so it seems like they are sponsored bikes. Who needs so many china bikes?
@@MotoCheez Im only speaking of the bikes not any other items you review. How many were Sponsored bikes?
Some I buy, some sponsored. Since I started I get hundreds of people ask me to review different types of bikes so if I can work some kind of deal with a supplier I'll review it. Sometimes I will buy it review it ride it for a while and sell it
@@MotoCheez I hear you boss, things are going good for you, enjoy it, I know I enjoy you sharing! Thanks for the honesty, and your riding buddy is cool I like him. The one that wears the skull shirt from years ago
Ahahahhahahahahhahahahahaha.....you people actually buy and use this crap?
Yes! Very reliable and Smokes the groms at 1/3 the price!
@@MotoCheez sure buddy....sure. What a joke.
@@ddrowdy7666 proof is there. I've owned groms and hundreds of other bikes. Hate all you want, it's a GROM EATER!
@@MotoCheez I cannot imagine what life is like when your goal is to out perform a Grom, doesn't EVERYTHING out perform a Grom?
@@ddrowdy7666 umm, this is a grom clone... Soooo