ORAMASK 813 LESSONS LEARNED

[@markhexamer]

yes i learned using this on sighs etc. I use Kilz clear primer and it sticks good that way

[@OutlawWoodworking]

Thanks

[@xntryk28]

A couple of things about any kind of masking.. Get your Vacuum brushes up.. . no contact with your masking from brushes. Get a roller for when you apply the mask... sand, seal, apply, roll before you cut. The brushes are a big deal they peel up masking. Downcut bits help... cadence manufacturing is now making a downcut v groove. I have not tried it yet, but it's a great idea

[@OutlawWoodworking]

Thanks that’s good advice

[@journeybruce4345]

You can use shelf paper instead to save A LOT of money. Awesome sign!

[@OutlawWoodworking]

Thanks I’ll try that

[@MisterMakerNL]

Thanks for showing me it is not that easy, did you tried at again after that (probably since it is months ago) .
Did you had better results or is just glorified painters-tape?

[@OutlawWoodworking]

I had better luck 3rd time

[@markhexamer]

what type of wood are you using?

[@OutlawWoodworking]

Cheap pine

[@markhexamer]

so you clued the boards together?
@@OutlawWoodworking

[@OutlawWoodworking]

Actually I think that was a piece of mdf

[@u431678]

Did you use an uncut or downcut bit?

[@OutlawWoodworking]

i used ru2075 from whiteside, i guess its a upocut bit

[@OutlawWoodworking]

actually that was wrong i used a 90 degree vcarve bit