You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍
This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!
Hey Devin As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end Hope my words make a little push in any positive direction Keep up your great work your doing well
Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know. 800-1000whp no issues for peak power up top using the stock intake manifold.
I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.
love the video. just making sure though, crank end play was measured too? and you sure about using that type of gasket on the oil pan? i would imagine high boost/crankcase pressure will blow that thing out in no time
Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.
Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$
What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?
Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped
Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.
Hey Devin I have an Rsti project that you'd be interested in. It has an 07 wrx drivetrain now and has a ringland failure. Mint 2.5 Rs interior etc etc. How do I contact you to make a sale?
I can't believe ASMR is beeing so popular...i was watching ASMR before to sleep...but now i've stopped to watch ASMR to sleep because NOW...I have a girlfriend HAhAhahaha
The talent in both the engine building and filmmaking aspects of this are mind blowing
That engine is a work of art. Sick video / engine build.
You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍
I liked the purple valve cover over the bronze but that manifold looks sick! ☑
Agreed, I really liked the purple accents
i went from watching a video of someone rebuild an engine in the middle of nowhere with basic tools in the dirt to this. Both master mechanics.
Cheaper to watch you build a motor then me do one hahah. Satisfy 👍
Devin deserves every ounce of his success
So freaking satisfying
This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!
AMSOIL assembly lube for the W! Watching with my 2yr old son. He didnt blink the whole video.
Love when there aren't any words. Not necessary.
I love the huhn solution kits!
🔥🔥 can’t wait to here it running keep doing your thing on these cars
man that was a simple but yet sick video on the engine build
more content about asmr building engine please. love it
Hey Devin
As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end
Hope my words make a little push in any positive direction
Keep up your great work your doing well
Beautiful work
Intelligent wark, Noo one word 👏🏻👏🏻
Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know.
800-1000whp no issues for peak power up top using the stock intake manifold.
I love the bronze on the valve cover but idk how I feel about the red intake, maybe a wrinkle black.
That calmed me down so well, thank you sir 😎👍💯
Amazing . Excellent Work MR Dev!
Next video:
Tearing down the EVO engine....again.
Damn...Devin never fails us.
What a lovely ASMR, such a satisfying content.❤ Keep it up man
I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.
Watching your Asmr videos before going to sleep knocks me out bro. 😂
Love the work ethics.
You are the man of the EVO 😊
Awesome video Devin
Looks like MAGIC 🔥🔥🔥
Great video man ❤
That block is the smaller than 1 of my bbc heads! That’s wild. BBC 509 cid 750 hp 740 ft lbs of torque. Makes my boat run in the low 90’s!
This was Hella awesome to watch
The car ocd mad scientist at work in his zone, clean asf.
You are my inspiration for real❤ my respect
When’s the yellow evo hitting the dyno?
When it's fixed😂
love the video. just making sure though, crank end play was measured too? and you sure about using that type of gasket on the oil pan? i would imagine high boost/crankcase pressure will blow that thing out in no time
Cool video, no chatter, no unnecessary advertising just a little too short 😅
Great work very skill full 👏 👌 👍
Thats gorgeous
executed perfectly !
Devin can you explain one day all the measurements and how they work together
Insanely great video
So relaxing. Not sure why but it is lol
thanks for sharing that. that was epic.
Thank you brother. This video gave me life lol
Please people like and subscribe this guy is an absolute legend and his work is amazing. Every build is perfect.
my type of asmr
Colour combo 💯💯💯👌🏾👌🏾👌🏾🔥🔥🔥😍😍😍😍
Honestly 12k don’t seem all that bad, looks like an awesome build
The Mastery in showcase
wow...inspirational...
I liked it no talking just working
It was great ❤
Looks like a nice engine to play with that ❤
Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.
Devin = Goated
Very Nice
Mentally Soothing .......
Looks good.
thank you
Nice work.
Devin does it best
Where did you learn how to build your own engines? This is a goal of mine to learn how from start to finish
Hi Devin, where did you learn all these things, are you a mechanic or did you learn by yourself ? Your brother and you have alot of skills
Devin is too damn impressive😮💨✨
i think i’m gonna be spending around the same. i’m gonna build a j35, just bought my acura tl type s with high mileage
more likely around $9k
My favourite vids
PERFECT ❤
Sweet!!
my engine should be done around november too. just need a little bit more money to buy a 4p cnc k20 head.
Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$
@@JonHop1 i already have a k24a2 bored to 88mm fully built. i have ferrera valves and everything already as well
Nice video man!. Quick question thou, was there a reason why you changed your assembly lube?
nice
Sheeeesshhhh wat a beauty!!!💯
LOOKS LIKE A HONDA
What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?
Is there a list of bits used aftermarket stuff etc
Where’s the other half? 😂 just kidding people, relax…. Those main caps look like they could handle a thousand HP shot of NOS.
5:43 😮😮😮😮SOMEE🤯💜😈❤️
no way did this guy just drill and tap his own headstud thread????
🔥🔥🔥
Nice ....
what was the first thread for? did it had a broken thread or bolt in it?
I'm also wondering
Looks like they were lining up that tool so he could drill out the head for larger head studs.
🔥🔥🔥🔥🔥🔥
Bling bling. Pretty sick.
and i can't even fit a new muffler on my car😂😪
Evo X needs a k24! 😆
Hey Devin Got any turbos for sale for an evo x?
Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped
Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.
man this video was too short give me more pls
what happened to the awd type r
Evo X engine? 4G11T ?
Links to thise tools would be nice.
Not as much of a fan of the amsr videos but I like the build.
WHAT ENGINE IS THIS?!
Hey Devin I have an Rsti project that you'd be interested in. It has an 07 wrx drivetrain now and has a ringland failure. Mint 2.5 Rs interior etc etc. How do I contact you to make a sale?
Релакс 😊
❤❤❤
I can't believe ASMR is beeing so popular...i was watching ASMR before to sleep...but now i've stopped to watch ASMR to sleep because NOW...I have a girlfriend HAhAhahaha
What is the point of the paint pen on the bolts? (This is a lead to my real question, btw)
He torques the bolt to a certain foot lbs for example 30 flbs and then tighten to 90 degrees.
niceeeeee