Carburetor And Clutch | Adjusting Your New Motorized Bike's Carburetor & Clutch | Bike Berry
Вставка
- Опубліковано 29 вер 2024
- Tony shares what he learned from our great Facebook community group about setting up our NT carburetor and clutch on your motorized bicycle properly the first time. Following these steps will help you understand how to adjust your throttle cable and idle adjustment screw to work together while giving you plenty of adjustments. Then he shows you how to properly connect your clutch lever to your engine's clutch arm. Let's Roll!
Please check out our improved throttle grip here:
www.bikeberry....
***Every single part mentioned can be purchased here 👇👇👇👇👇***
BikeBerry.com ►bit.ly/1FZ8nPp
Facebook ► on. 1wWG4fD
Instagram ► bit.ly/1aM3WxZ
Twitter ► / bikeberrycom
***Everything you need to make your own Motorized Bicycle.***
Chapters
0:00 - Introduction
#motorizedbicycle #bikeberry #motorizedbike #100cc #80cc #66cc
#BUILDITRIGHT I just want to let you know that this whole series is awesome! It's really helping me plan what I need to do to make the engine kit I have coming fit well on my cruiser, as well as all the things I might need to buy. Has answered so many questions in a small timeframe. Thank you Tony!
#doitright
I play this on .75x speed and forgot. left and came back, hit play I thought, wow! this guy is baked! lol jk definitely thumbs up from me
#Build it right. Dude.
U was the 1 that was high hahahaha
@@svensplooge9961 You might be with this grammar😂
lol, had to try it....hafuckinlarious, lol. thanks, I needed that.
Put it at half speed and he sounds drunk 😂
Learned alot..glad you took the time to make this manual thank you im putting my kit together please me luck I've got a lot of people interested and watching me I mention bike berry hope I can help😊
I was given a new motorized bicycle that the owner had never been able to start. The carburetor slide had been assembled upside down.(It is possible and the throttle will only open half way) Because of that, the bike sat in the garage for 6 years until it was discarded. I also found out that the rotor had lost magnetism. Score!
Very informative and easy to follow. I will be watching for more important mechanical institutions. Thank you!
great video first time builder .still setting every thing up. on my bike . # build it right
For some reason I have too much slack in my throttle cable. How do I take out the slack with both ends adjusted completely out?
Thank you
Thanks for the video. It was very informative.
#BUILDITRIGHT
Why don’t y’all sell something w power that’s fast?
#build it right
#BUILDITRIGHT! GREAT VIDEO VERY INFORMATIVE. New subscriber here.
#build it rt
I wanted to see the fine tuning.
#builditright Oh no. Now I have to go back and take the clutch cable off to remove that extra piece. Good information.
#build it right 👍
All good stuff! #Builditright
Hey so I bought a 50cc engine kit. I've got it running but I am getting zero trottle response.
Everything is tight I have throttle spring back but no forward motion.
clutch rod that is hooked to clutch arm is sloppy i put a copper bushing in it from some flexible copper tubing and cover has a long bolt because chain guard mounts there other wise you can use short one
i got an e-mail from you eartlier today but i couldn't read the number inside the dots
Cool
#BUILDITRIGHT Thank you for the informative videos! Please, keep it up!
The throttle housing was installed improperly, lol.
#bild it right
Would I be able to buy a bike engine kit off you
10 tours correct?
Builditright
Build it right
#builditright
TWITTER CHALLENGED (worse than me): a hash tag has no spaces - otherwise it's not a hash tag. The crawler detects it and makes it trend.
I recently came into possession of one of these and I have to say I'm very thankful to have you as a teacher and someone to show me some loops and give great feedback on the issues that I'm having on a hand-by-down fixer upper. #builditright
#build it right
#builditright
2:24 You dont explain what you are doing. You are change where this is set on the pin. What are you doing? Why?
6:43 Ten to 11 1/2 turns. Had to watch or I would have tried whole turns. Great video though. Nice filming.
should state 5 -5.5 turns
My goodness , I was at work and a friend said he knew how to install carb lol
I’m gonna take the information from your video and do it right
This is how I get to work everyday
I have a prosthetic foot , my freedom to get around
Thank you
Did it work for you i just got me one and im having trouble
I have a prosthetic leg right leg below knee. I was biking 30+ miles a day until I got my 50 cc
This whole series has helped me with the little problem I had with my first motor and I actually had to take it off because I missed something up but if I would have watch the videos first I wouldn't have missed it up. You guys are doing an amazing job and you always #builditright
You ABSOLUTELY hit the nail on the head about the magneto leads being backwards!!! Brand new motor, just WOULD NOT start and I went through everything trying to diagnose it, turns out it was the leads being reversed! I have also noticed these motors are NOTORIOUS for the threads on the end of the crankshaft stripping at the drop of a hat to where the won't tighten back up,! I have TWO of these motors this has happened to, is there any OTHER ways to fix it besides rethreading it to the next size down or replacing the whole assembly?!? Thanks in advance! Be blessed.
Im still 15 years old been riding em since i was 13 years old and i love motorcycles alot but im still young to ride one so im into this hobby and i really enjoy it. Thanks Tony.
#BUILDITRIGHT
I'm 62 years old!, and used to ride a motorcycle, and bought one of these, to ride around town!, its little slower,lol but that's ok it's a great hobbie!, and when your ready for a motorcycle, ALWAYS!!! remember to wear helmet, Jean's, gloves, same as a motorcycle I just bought Phantom 85 v2 just breaking it in! RIDE ON!!!!
#build it right
Thank you for walking through it slowly but not to slow. Your the first one that I could understand to say again I appreciate your smooth way of talking. Have a great life. Keep it cool
Gotta say that you were probably the guy who helped me more then the 100 other videos I watched
YOU THE MAN ,👍
# Build it right, I have been wanting to get a new bike for my engine but can't afford it right now. I lost the cover for my air filter and I just cut a strip off a mountain dew bottle to hold the filter in place.
Hey great video.New installation my bike won't start but after watching the video I realize my throttle cable is to loose The video shows how to pick a different hole to pre snug cable having g your adjustment screws all the way in so you have maximum adjustment abilities
Wow this video was so helpful on my new beach power cruiser project! I’m going to the bike berry site now
#BUILDITRIGHT
I never want anything in my life but great videos great everything bikeberry you're the greatest and I love building motorized bikes myself #buliditrate
I like the explanation of setting the carburetor, now I can adjust my five bikes. I have to get fabric from craft store not to loose clip while breaking down carburetors too. Good teaching video I like this awesome!
Mark! So glad it helped you my friend!
I can't believe how much I enjoy watching these videos.
Vary informative thank you for your time and how to I really hope Im not late to the give away #builditright
Dammmm lots of small details, thank you for sharing 😊 love you guys !!!
Glad this helped you P100D!!
I am watching this series because I bought the stage 4 kit from BB. It would have been nice to have an instructional video that only used the parts they sell in the kit. Make an additional upgrades video later. I like this guy and the way he explains it, but he used the stock carb and upgraded throttle and doesn't show how to use the other ones. Leaves me looking to other creators for needed content on their motor.
So how did your build go? I’m sitting here looking at my kit and going through these build videos right now and felt the same way about this series lol u got any recommendations on other build channel’s for this specific kit?
Little things you 😢should do to make the motor run properly
#BUILDITRIGHT
Great video, good luck 🤞...
carb settings are a pain in the seat lol . #BUILDITRIGHT
Build it rite
Be patient with your first build and #builditright
Love this series so informative 👏
Dump the stock carb, upgrade to an XR 80
I’ll check those out!
#builditright
Hey I really can't thank you enough for your help. Thank you so much
#Builditrate
Thank you for the video great information. #BUILDITRIGHT
Well done. Good to watch. Happy New Year. 👍.
#BUILDITRIGHT
Well this guy seems to know what he's talking about, Wish he were the one from Bike Berry that I talked to when I got my first 2 kits. Whomever I spoke with gave me bad advise! I asked a simple question, How much torque for the head studs! I got back an e-mail stating 17 psi, Which I thought was a bit high but figured Bike Berry would know. Well it crushed my Head gasket, Brass one and caused a major air leek. As well as low compression. Got to say even though Bike Berry may sell these kits, Don't go thinking they know any more about your 2 stroke than anyone else does, Cause they really don't. Tony seems to have a clue, But he is still only one person there.
Thank you Stephenfhauk, I truly appreciate your comment my friend! One of the things we’re working on is helping support answer questions with accuracy. Take care!
I wish I can get a bike like that for my kid he's 16 I'm trying to get him to order a couple of engines that we can start putting on our bicycles but he says in front of his friends it wouldn't be cool because it's not a dirt bike I told him. you got to learn how to walk before you run
I hear ya man, he’s fixated on those dirt bikes. Maybe you should cut him a deal that one of these engines is the first step. Then when he proves himself with it you’ll get a dirt bike. Let me know!
I'm 16 and I got 2 bike one I custom built from the ground up w lowrider forks and handle bars w a four stroke engine w 2 stroke performance carb I mean motorized bikes are pretty dope if you got the imagination
I’m building my own and this video gave me great tips on how to install my clutch cable
Thanks
Welcome back fellow motorized bicycle weirdos!
First one of your videos I’ve seen! Love your chill! 😎
SUBBED!!
#builditright (even though it’s 2 years old😂)
Gasbike carburetors' come Stock with a #70 Jet. Here in Michigan that's way to RICH.
I got a Big power increase with a #65, #64 is next.
Zeda engine, for the Balanced Crank, High Compression Head, Tuned Pipe, Better Spark Plug. and finally the Main Carb Jets.
I tune as if I would for other 2 cycle small engines, chainsaw, weed trimmer, blower. It's all in the Air/Fuel Mix. A 2 cycle Engine will TELL you when it's running right, just Listen to it.
Finally, from a cold start, Warm the engine up COMPLETELY !
Then go and enjoy Your Run.
I bought a 2 stroke engine and installed it on my 18 speed mountain bike. But I really got some valuable information from this video that I can use ASAP!
Excellent! Let us know how your mountain bike project is going!
I built my bikes right #BuildItRight
I like the way you explain things.I restore bikes.I'm sixty five years old and i'm looking for a forest stroke hundred c c bicycle Motor from you guys I've seen on the UA-cam that they've got one.That's two hundred and twelve C c's
I would like to start out by saying thank you for all the helpful information.
My brother gave me a 66cc beach bike. It h ad a lot of issues broken motor mount bolts 3 to be exact slipping clutch and a carburetor full of debree. And thanks to your videos I was able to bring it back to life. So thank you so much please keep making videos priceless.
It bike it 🔥🔥👍
I'm having trouble getting my motor on my mountain bike and getting it started. I have everything hooked up but when I tried starting it by pedaling the rear wheel got completely bent at the rim and the sprocket chain was extremely stiff so the pedal connected to the original chain rotated freely but the clutch wouldn't release the chain on the sprocket. I bought a new wheel but I don't want to have the same thing happen again. Please help
I love these motor bikes, I'm just having problems with my carb. This video really guided me to fixing my problem. Thank you ..keep up the gud work
#Build it right. Liked, shared and subscribed. My bike ran great after build, but then the chain broke while riding and caused me to wipe out. Since then, I have wired, rewired, changed out cdi 3 times,and I can't get it started. It's making me crazy,!!!! I will join your forums to see what everyones advice is, along with yours. Thank you for such an informative video!✌️
For days, I have been wondering why my bike only accelerates and the clutch was ineffective. I realized that the clutch acuator bearing was missing, which must have fallen out somewhere when the bar came out. If I put another bearing in, will that enable me to use my clutch?
People rate the plastic throttle better. Actually they hate on the metal ones a lot. I do wish there was something better not too expensive. YOU'VE BEEN A GREAT HELP - please get back to the OKO carb - ?
I don't mean to split hairs but I seem to have a habit of doing so from an early age. Your "screw it in ten to eleven times" is more like five to five and a half if you're counting ENTIRE revolutions.........
Moving the adjustment three lines up unfortunately is gonna be an experiment due to the fact your pin has five lines and mine has four...Go figure.
BUILDITRIGHT#
Can't wait to get that free bike. 👍👍👍
I just seen the show and it was great nice detail on the the show 100% helpful. Very good job I look forward to seeing more THANK YOU
Why add grease to the bucking bar and bearing? Isn't this a Bike Berry engine? Why doesn't Bike Berry grease them instead of having the customer have to go out and buy t tub of grease just to use a little dab?
#builditright man I don't know what I done with out your videos on here appreciate your buisness and your customer service to 💪💪💪💪💯💯💯💯💯💯💥💥💥💥💥💥💥
#builditright
#builditright
#builditright
#builditright
#builditright
I have 2 of those exact Bofang carbs, ordered jets and their the wrong size. Are the jets in those carbs 8mm? I ordered 5 mm and they are way smaller. Should i have found 8mm and ordered those?
#builditright
#builditright
#builditright
Hashtag build it right😁
Thank you for enlightening me on the fact that the stock carb needle clip has multiple positions on it! Now (once break-in progresses a bit more) I know how to lean her out easily.
So this is the first video I've seen where are you took off the little notch and adjusted it according to how you mix your oil and gasoline I did not know that I've had my first bike for 3 months I got me a bbr tuning 80cc motor on it and now I'm going to adjust some things just like to demonstration you just gave to my store my bike about 2 or 3 days ago and these idiots buried it with trash bags wrapped all around it I guess they're going to leave it there for a while and then think somebody won't forget about it it happened at Walmart ended up finding out with some homeless people they have a camp I'll call him about 6:00 in the morning I walk down through there at a 410 pump in my hand slave and my friend Ivan had 9 mm we went down there and broke up a homeless junked out chop shop for bikes basically and I pulled out a hammer and I told the guy I said if I hear you stealing anymore bicycles from Walmart on one hand I'm breaking one finger and on the second hand I'm breaking two fingers therefore you won't be able to use your hands but you won't be completely useless now they call me in the bicycle gangster I even went back the next morning they are homeless sleeping in a tent I told him look I've been homeless I've done the whole tent thing I was addicted to opiates for almost 30 years I went back down there the next morning and carry them some breakfast cuz you never know when I might need one of them next time I bite it so they might not be dumb enough to push it across the street to where they're staying
Thank you for such a great video! The presenter should get an agent. His voice, demnor, and cadence made the technical video fun and exciting to watch. Thanks for sharing all the knowledge! #BUILDITRIGHT
I had to take off my air cleaner and just tighten the hell out of the screw. Because even double nutted the stupid thing comes loose and the vibration from the engine rattles the choke closed. Which kills the engine and sucks. I just choke my engine with my finger. Problem solved!
Ed here... Wow ! What a calm & clear.. View & explanation.. I've viewed your video's before... Excellent stuff.. Question for u... My carburetor is sitting at almost like you have yours... And yours seemed at 45 degrees higher than mine.. I understand yours is a show and tell.. Mine is new... Break in two 4 liters of gas.. Still running good.. But sounds bad.... Before i give it.. To my grandson so we can ride together... Suggestions tony... Can it run better with a level carburetor...
Great question Ed. As level as you can get it is most definitely the way to go. Of course many factors are involved like engine mounts etc.
This bike is hanging from the ceiling hoist at the moment so it’s definitely out of level compared to how it’ll sit on on the ground fully assembled.
Now, as for sounding bad. My black bike sounded bad for a few tanks a gas. Since yours is new I’d dial it in as best you can then ride it a lot to truly break it in. It should sound better and better.
This video was very helpful....I wish Tony was around when I was trying to be apart of the community and jacking up 3 motors....thanks man!
Hopefully I can make my back....
#BUILDITRIGHT
How many ounces of oil for one gallon 0f fuel for 20:1 mix and 30:1 mix its my first 2 stroke I have performance parts to but have not put then on till breaking
How about a nice 80cc engine and thanks to you now it's running right and I appreciate you very much I'm just a beginner but I wish to learn a lot more just back is really really fun thank you very much