Hacks to save time. 1.Instead of taking the clutch covers of the engine, engage the clutch with the hand clutch lever provided and place one end of the chain into the engines sprocket and rotate with your finger the under side of the engines sprocket so that the chain rotates outward and chain comes out the other end. 2. Hide the white wire off the CDI if you are not going to add any head lights to your bike. Coconnect the colors that match first and then connect wires that appear to be ground to the black one for example brown or green. then you guess right their is one wire left to connect I'll let you figure that one out. 3. Allow enough elasticity on your fuel filter by placing decent amount fuel line hose to avoid any stretching and disconnecting the line and having to replace the hoses and spilling fuel. 4. If your engine is new it will take some time to start make sure to open the fuel line and to open the carburetor. Gas tank opens to the right and carburator opens downward on the lever.
A mechanic told me that if I'm not confident that i can finish the project, i can do all the parts that dont remove the chain from the bike and do the engine and bike part last. Would that be smart or just take on the project in a day
I made the mistake of listening to people and watching videos about building a bike. They said never use rubber motor mounts. Big mistake as I had nothing but problems the whole time. Finally mounted it with them and it made all the difference in the world. Always always use rubber when mounting a 2 stroke.
Compared to the instruction manual that came with my kit. This video is great. Thanks you saved me a lot of heartache and confusion. Here is a tip: When in installing the sprocket I measured the distance from the threaded shaft to the end of the teeth at 180 degrees segments. When measurements equal, this insures that the sprocket is centered.
what the hell is he talking about forward peddling cranks lol what are you gonna do peddle sideways ???? he means the bottom bracket is set more forward on the frame
I will be getting a motor sometime in the future for my bike, and I saved this video for that time. Very simple to follow, steady camera, and not rushing.
Tip: at 11:21 when he says to remove the flower nut you have to hold the clutch pedal in while pushing down on the cover to free up the flower nut, I was stuck with that problem for a couple of days until I watched another video on clutch troubleshooting so I thought I should share my experience
It's always good to take some old bike tire tube that's cut into strips and wrap them around where the tube of the bike where the engine touches the frame between the engine and the tube on front and back, it helps reduce vibration a fair bit and shake and it keeps the engine from digging into the metal of your bike tubing
i appreciate this video. i just bought myself a zeda 80 firestorm kit, and it looks like after a couple watches, I should be able to do this without a problem. I love how in-depth it is, and how nicely the video is set up. thank you again for the help, cant wait to start riding
18:1 should be 7.1 oz oil to a gallon. 24:1 would be 5.3 oz. Too much oil leans out the fuel mixture since it's getting less gas and will run hotter, so more isn't better.
Fantasic video! I’m a 56 year old woman and am positive I can do this! Being mechanically inclined as I am. Thanks for such a great job ❤️ Just got my kit yesterday. Lets gooooo!!!!
I couldn't help but notice this in reccomended videos, makes me want to get one now even though I have a 125 already! Really good tutorial, one of the best well explained tutorials to date!
I bought the 100cc anbull kit...the kit was missing about everything ...so in luck I had most of everything I needed from my old kit...well this video has helped me in putting together my bike with the parts left over
Im gonna be the first person not Meth'd up riding around on one of these in my town. Hope no one gets the wrong idea and that is why I built mine as clean and proper as possible, so my bike dont look like all those folks with severe personal problems.
I actually bothered to do the math and the calculator says the instructions translate to 3.125% oil per volume, I usually add 4 oz. of oil to a gallon of gas (conveniently measured by a mason jar :p )
...funny how I had to figure all this stuff out for myself(especially the carburetor assembly) and my build with gas tank Kreem coating took 3 days NOT 2 - 3 hours, like it says on-site, lol. My build was on a Schwinn Errand and it was perfect, not a thing wrong with it. I got speeds of up to 41 mph, until I burnt the brushes out.
This was the most excellent , thorough, and helpful "how to" video that I have watched. Amazing job, you guys. I wonder if it would be possible for you all to make a video that explains how to install the brakes. Getting it to go is one thing, but there is a real problem if I can't stop it. Thank you guys so much.
I'm actually going to be buying a bike next month that a local here built in Canada Way Down East. And I'm pretty sure the whole shebang came from you. At least the motor and whatnot definitely did. So believe me when I say this, you have Canadian customers. Already have one that I'm working on a building and whatnot but I think it's still a good idea to have the backup. And I tend to trust it where a good chunk of it was built by you bikeberry then the rest of it was put together by a very experienced person. I'm good with the motors as I'm a certified small engine mechanic. However I'm still learning the rest of it which is all very much important. Like making sure your sprocket gets mounted correctly and true so the chain is within its parameters, things like that. And that's where your videos help a lot as well. Therefore I do trust anything that comes from you
I built one in January 2020. I have probably ridden 200-300 miles since. I ran 16;1 fuel for 2-3 tank-fulls and then moved to 20:1. The engine likes the 20:1 mix and it doesn't smoke at all. It's important to check tightness of everything frequently. Head bolts need a little tweek every few rides.
why not use thread tape or thread lock? you can even use double nuts to prevent loosening. and if your really brave use some JB weld behind the nuts on the thread after you tighten them for a permanent solution. Loctite 271 was made just for this.
no no no, don't use 20:1. using 20:1 will give the engine less power + your engine will have a huge carbon build up inside your cylinder and exhaust ( it will also cost more ). I suggest something like 30:1 watch some videos and find out. 😊
I recently bought an 80cc motor from you guys. Did everything the way you guys did it. Starting up the motor jolts while it idles and when you gas it, it's at the same speed as it idles, but no jolts. I see the reviews on Amazon and the description. Some people said they weigh 200 and they are going 40mph. I weigh 140 and I'm going at a walking speed 😑.
Adjust the idle screw. It sounds like the screw is not set right or the throttle may have not been assembled right. Triple check the throttle in the carb.
I agree with the comment about the tools used in this video but on the other hand compared to other videos I've seen this one is comprehensive and easy to understand. As I said in my last post this video saved me a lot of heartache. As far as the electrical there it's that much to it without getting into a technical explanation of how it all works. I personally just wanted to install the kit and get it running. So I would give this video an A minus which is still very good. Additionally FYI there is a lot of info on the internet on these motorized kits so spend some time and do some research before you get started.
Just got one of these and mine came with the sprocket tool as well as the front mount piece you just put on your engine. So far pretty straight forward
u did such a good job with this video I think even an OLD Woman (like me : ) can fix my 2 stroke bike now! Thanks 4 taking the time 2 do this & posting it on-line!
So I've went into the rabbit hole. Ordered the stage 4, got it.. inspected it and assembled. Now just waiting on my Nel Lusso to arrive. This is gonna be too fun
Of all the videos and info I've looked up considering these engines this is by far the absolute best there is. My bike is nothing like these new easier models lol. It's a fat butt Shwinn Stingray and I still got it mounted within an hour of watching this. Tho the electric wiring part could be a tad better in explanation as not all the engines come with those colors and it's rather easy for newbies to cross wires. Other than that absolutely awesome job on this 👍
Great video thanks! I'm just wondering if something was left out during the editing of the end of vid. The fuel mix ratio wasnt shown or described in any detail.
This is Great. Very well explained. But I must say the Part about the electronics was a little to fast. I just got myself a racing bike in pretty bad shape. I will restore it and add a motor to it :-)
I bought one of these motors for my mountain bike and find it fascinating that the parts that they now send out for different compared to what I had received back in the day. I guess they're trying to improve the motors functionality.
We were limited to 49cc with out getting a license. So I bought an 80cc engine and stamped it 49cc. So long as I never got caught going over 20 mph I was OK. My bike did a scary 29 mph.
Jacob Butler yeah that could work... ive kind of stopped using my bike cause of the chain constantly falling off bc its never aligned, and also gas leaks a ton with these things
@@arjunyeleshwarapu ... Leaking from where ? Fuel Line ? Heat up the line before putting it on either end. Once it cools it shrinks tight. Pepcock leaking ? Tighten it. Still leaking ? Gastank posts ? You over tightened the gastank posts to the frame...
best tutorial out there.... had I watch this the first time I would not be going back as I am now to correct things :) thanks for taking the time to make this vid!
Actually. I do. And I Horde those Shits Like Fuckin Diamonds. I have one simple rule. I don't lend out my tools... Period. Plus. I don't have kids... Soooo that's saving me a lot of heart ache...
NinjaViking1 yes, but if you look at pics of traditional "board track racer" bikes of a century ago, the flipped bars were "how they rode 'em". On a beach cruiser frame it gives that vintage look, especially if you wear a backward "duckbill" Tweed hat (or kangol), and round lens or "red Baron" goggles. Those puffy thigh riding pants too, lol. Style points count you know!
Cables are not long enough Had to do something. Also it will be nice when that wire tie breaks at the chain guard and it gets jammed up. Your asking for a crash!
Around 110 years ago or so the motorcycle morphed out of the pedal bicycle fitted with an engine of one or two cylinders. The engines used were usually four stroke.
When I put my sprocket on the spokes I did it by taking the rear wheel off the bike, fitting the sprocket, plates, bolts, rubber ect loosely then refitting the wheel to the bike to do the alignment.I find if you attach something to the bike's rear frame near the sprocket (ideally a DTI gauge but lol I held the hammer against the frame) and rest it on the big sprocket so its just touching, then turning the wheel it will let you see how much the sprocket is out by and let you adjust it in both up and down and left and right directions until you have it done up right. The manual with mine said the tolerance is 1.5mm (but not in which direction?) which was easy enough to achieve.
Hi guys! Thank you, this is a great tutorial. It explains a great deal. I got a kit sold to me without the rubber spacers or the universal mounts and it just won't fit. Where can I get those so I can proceed with the build? Do you sell them separately? Thanks!!!!
Awesome video. Made my installation an absolute breeze. Question: can these engines go out of timing? I did a test run, chain tensioner came loose, locked up chain. I fixed it and now don't have any spark... Thanks for any help yall
@@J_Jim-mo3ub That's wrong. A 66 cc (80/100 cc don't really exist for bicycles) can go up to 80kph or 110mph if tuned right and built right, out of the box it can go 50kph 80mph or faster.
@@Dartoras Sorry I reversed it,Yeah, I wasn't going for exact, I was guessing. And one thing I do know for sure is that 50mph on the speedometer is about 80kph, so I' m not so far off. But I did mean kph when I said how fast the motor is. I remember catching a ride with U.S. citizens in Canada, they didn't know what kph was, so they were driving at around 110kph, lucky they didn't get stopped. But we got far, pretty fast.
@@darrylkinslow5613 I did not want to offend you, I live in the EU and with so much content in the US on the Internet, when I saw it, I thought it was just miss written
I'm currently mounting a similar engine on my 1970s cruiser bike and oh boy has it been a challenge but I think I'm almost done all that's left to do is the electrical and clutch
@@walkerfharris built 4 since then with a 5th ready to be built. i using an rat bike with oversized frame and tires. just trying to figure out how to mount the engine
i think i am ready to do some commercial builds for resale. also bikeberry.com is a great source of parts and kits if you have not already checked them out
For example, the rear sprocket 44 tooth has burrs on one side. These should be filed clean before the installation ! That could take up to an hour by itself. I did this with a small round file. It will save your chain from exploding, and yes it has happened to me
Hi. I'm a paraplegic and use a wheelchair. I would love to do a build like this but I would have to start with something LOWER with THREE WHEELS. Kind of like a trike. Have you ever heard of this being done ??? and what are the chances of my success with this project ??? I'd greatly appreciate your info and advice if you are able to give it. Thank You. Sincerely, JAMES.
Yes I have one but for a trike build I would recommend a 49cc 4 stroke engine if you want to ride in residential areas because near me they hate all my dirt bikes three wheelers and motorcycles etc.
Man oh Man , I really noticed this guys voice has that distinctive East LA Chicano accent , makes me home sick ... you probably did not even notice but it is a Hispanic Los Angeles Dude talking ! ... video was made in a suburb of Los Angeles !!!
His tutorial works. was wondering why my gas bike it wasn't working... Was wondering why The idler was so painful to install... Destroyed an entire wheel but fixed it... Did you know that you can get these things to work for 15 seconds with the idler on backwards? Well I do now.
Thanks man I am not tool savey and this helped me understand my bike I was wondering what the little plastic part between the mortar and the exhaust was called
Ok so if watched a lot. First 2 gas tanks are 1:16 (example: 100ml oil, 1.6L Gas Permium. After those 2 tanks you can go 1:24 or 1:26. (Some even do 1:40 but idk about that)
@@arablakba6988 yeah for 2-3 months then i rode it basically everyday i was adjusting the spark plug and snapped off the hook saving for a new plug and a pull start because the wheel size is 20 inches it has to be rolling down a hill to start
Very good! Harbor Freight has some seamers that are well made but inexpensive. They make quick work of bending pliable brackets. Do you sell the link removal tool?
What about the white wire? Comes oit of the engine block next to blue and black for spark. No mention anywhere for it in any instructions. Thank you and great video.
I got a gas powered kit from Bike Berry. I ordered the thick cushion motor mounts. This is an extra $15.00. The bolts sent in this Extra thing are too small a diameter. Other than that I give Bike Berry a Great Review. The gas tank has a small dent in it so I called their customer support and talked to Max. He treated me with kindness and respect. He asked for me to send him a photo of the dent. after 1 day I was contacted by them and they told me that they were very sorry that I ended up with a damaged part and they told me that they were going to send me a new 1. I got it in 2 days. I am happy I decided to trust these people. I know they care about me as a customer. I give them High marks. Too bad about those bolts. You will need to spend $2.00 for them. They are a 8 mm bolt with no head. Dont forget to get the nuts washers, and lock washers Dont forget to get Lock Tite. Also I must tell you I put this on a mountain bike with 10 or so gears. Just so you know it can defiantly be done. I will give them my continued business because they earned it when they showed me that they care about me getting a quality product. Kindest Regards James Gober
Glad to hear. Because my kit is missing lots of parts. And I emailed them. It's Saturday befor Columbus day. So I hope to hear from them by mid week. I also trust bikeberry. And will continue to do business with them.
This is the only video on youtube which gave me dimention requirements to fit a engine on a bicycle. Appreciate your great work :-)
Hacks to save time.
1.Instead of taking the clutch covers of the engine, engage the clutch with the hand clutch lever provided and place one end of the chain into the engines sprocket and rotate with your finger the under side of the engines sprocket so that the chain rotates outward and chain comes out the other end.
2. Hide the white wire off the CDI if you are not going to add any head lights to your bike. Coconnect the colors that match first and then connect wires that appear to be ground to the black one for example brown or green.
then you guess right their is one wire left to connect I'll let you figure that one out.
3. Allow enough elasticity on your fuel filter by placing decent amount fuel line hose to avoid any stretching and disconnecting the line and having to replace the hoses and spilling fuel.
4. If your engine is new it will take some time to start make sure to open the fuel line and to open the carburetor. Gas tank opens to the right and carburator opens downward on the lever.
fuel or oil?
@@thedailydude2 gas, 92 octane
Ñ
@@thedailydude2 I no longer suggest doing this to avoid confusion and damage to you engine I'll remove that part
A mechanic told me that if I'm not confident that i can finish the project, i can do all the parts that dont remove the chain from the bike and do the engine and bike part last. Would that be smart or just take on the project in a day
This was by far the most helpful video I found yet it’s simple fully explained and pretty professional delivery with instructions Thankyou 😊
Ive heard trash talk about bbr.. but clearly no other company is as clear and informative as y'all. Thank you
I made the mistake of listening to people and watching videos about building a bike. They said never use rubber motor mounts. Big mistake as I had nothing but problems the whole time. Finally mounted it with them and it made all the difference in the world. Always always use rubber when mounting a 2 stroke.
I just installed my pexmor moter I couldn’t have done it without you! Thanks so much.
Just ordered mine wish me luck 😅
Compared to the instruction manual that came with my kit. This video is great. Thanks you saved me a lot of heartache and confusion. Here is a tip: When in installing the sprocket I measured the distance from the threaded shaft to the end of the teeth at 180 degrees segments. When measurements equal, this insures that the sprocket is centered.
You got an instruction manual?
Yeah but see I got this fuel filter...
@@vincent10717 yeah what the f*** are one of those
I love the way you said your oil is as follows the oil mixture And then there was nothing there
he aligned the cut in the rubber right where the plates meet for the sprocket ....would not have done that but whatever
what the hell is he talking about forward peddling cranks lol what are you gonna do peddle sideways ???? he means the bottom bracket is set more forward on the frame
I will be getting a motor sometime in the future for my bike, and I saved this video for that time. Very simple to follow, steady camera, and not rushing.
Hey , ever get the bike :)
@@humaliba5426 i think he didnt
with my dad i got bought parts that we needed and thanks to video i made my bicycle with enginge thanks alot man!!!here is like+subscride
ua-cam.com/channels/PRPIP5uWB5cR8LgQq4qTDA.html
9 years is he brave to answer if it works?
Tip: at 11:21 when he says to remove the flower nut you have to hold the clutch pedal in while pushing down on the cover to free up the flower nut, I was stuck with that problem for a couple of days until I watched another video on clutch troubleshooting so I thought I should share my experience
why do u need to take that off anyways can i just skip this step
@@vinniecasella3849 No because it will stop the gear that the chain is attached too from spining freely and you won't be able to attach the chain
@@dominichebert9884no.. use the socket on the nut for the sproket that comes with the kit to spin the chain on just make use clutch lever is locked in
dude are you still alive.. cant believe someone that doesnt know the difference between a pedal and a lever is trying to build a gas bike lmao
fuel on off switch/ fuel valve is called a petcock
It's always good to take some old bike tire tube that's cut into strips and wrap them around where the tube of the bike where the engine touches the frame between the engine and the tube on front and back, it helps reduce vibration a fair bit and shake and it keeps the engine from digging into the metal of your bike tubing
i appreciate this video. i just bought myself a zeda 80 firestorm kit, and it looks like after a couple watches, I should be able to do this without a problem. I love how in-depth it is, and how nicely the video is set up. thank you again for the help, cant wait to start riding
Its not in depth though!? Johnny barely showed anything about what he did there with the magneto loop! Wtf man???!
I just got the same kit, I’m installing it on a schwinn OC Chopper
For those wondering, here are the fuel ratios (I think)
Break in: 18:1(6oz oil per Gal)
After Breakin : 24:1(5-6 oz Oil per Gal)
18:1 should be 7.1 oz oil to a gallon.
24:1 would be 5.3 oz.
Too much oil leans out the fuel mixture since it's getting less gas and will run hotter, so more isn't better.
@@wingerrrrrrrrr so don’t fully full up the petrol tank
Its 8oz. For break in period then after that 5-6oz
Use 1:40 right from the start or the rings will never seat
@@wingerrrrrrrrr less gas = less heat not more heat! more oil less wear
Fantasic video! I’m a 56 year old woman and am positive I can do this! Being mechanically inclined as I am. Thanks for such a great job ❤️
Just got my kit yesterday. Lets gooooo!!!!
I'd love to take u out on a date
You’re too old and frail to handle that braaap
I couldn't help but notice this in reccomended videos, makes me want to get one now even though I have a 125 already!
Really good tutorial, one of the best well explained tutorials to date!
Thanks bro all I needed was a bottle in the back wheel
I bought the 100cc anbull kit...the kit was missing about everything ...so in luck I had most of everything I needed from my old kit...well this video has helped me in putting together my bike with the parts left over
Im gonna be the first person not Meth'd up riding around on one of these in my town. Hope no one gets the wrong idea and that is why I built mine as clean and proper as possible, so my bike dont look like all those folks with severe personal problems.
the fuel ratio is as follows........... and thats it. what wheres the ratio?
+Austin Dovel I would use 1dl to 5L making it 2%
I actually bothered to do the math and the calculator says the instructions translate to 3.125% oil per volume, I usually add 4 oz. of oil to a gallon of gas (conveniently measured by a mason jar :p )
32:1
Yeah
@@codyhastings8902 can you teach me how to do the ignition
...funny how I had to figure all this stuff out for myself(especially the carburetor assembly) and my build with gas tank Kreem coating took 3 days NOT 2 - 3 hours, like it says on-site, lol. My build was on a Schwinn Errand and it was perfect, not a thing wrong with it. I got speeds of up to 41 mph, until I burnt the brushes out.
What brushes are involved with the two stroke motor? Did you mean you burned out the clutch?
best tutorial on youtube hands down for these builds
This was the most excellent , thorough, and helpful "how to" video that I have watched. Amazing job, you guys.
I wonder if it would be possible for you all to make a video that explains how to install the brakes. Getting it to go is one thing, but there is a real problem if I can't stop it.
Thank you guys so much.
I'm actually going to be buying a bike next month that a local here built in Canada Way Down East. And I'm pretty sure the whole shebang came from you. At least the motor and whatnot definitely did. So believe me when I say this, you have Canadian customers.
Already have one that I'm working on a building and whatnot but I think it's still a good idea to have the backup. And I tend to trust it where a good chunk of it was built by you bikeberry then the rest of it was put together by a very experienced person. I'm good with the motors as I'm a certified small engine mechanic. However I'm still learning the rest of it which is all very much important. Like making sure your sprocket gets mounted correctly and true so the chain is within its parameters, things like that. And that's where your videos help a lot as well. Therefore I do trust anything that comes from you
I built one in January 2020. I have probably ridden 200-300 miles since. I ran 16;1 fuel for 2-3 tank-fulls and then moved to 20:1. The engine likes the 20:1 mix and it doesn't smoke at all.
It's important to check tightness of everything frequently. Head bolts need a little tweek every few rides.
why not use thread tape or thread lock? you can even use double nuts to prevent loosening. and if your really brave use some JB weld behind the nuts on the thread after you tighten them for a permanent solution. Loctite 271 was made just for this.
no no no, don't use 20:1. using 20:1 will give the engine less power + your engine will have a huge carbon build up inside your cylinder and exhaust ( it will also cost more ). I suggest something like 30:1 watch some videos and find out. 😊
How u make that 20:1 shi boiiii I need to know
@@Dragnmastralexthat's correct
This is by far the best video on how to build on of these things.
Thank you so much man for putting a lot of effort into this video and instructions, super useful!
I recently bought an 80cc motor from you guys. Did everything the way you guys did it. Starting up the motor jolts while it idles and when you gas it, it's at the same speed as it idles, but no jolts. I see the reviews on Amazon and the description. Some people said they weigh 200 and they are going 40mph. I weigh 140 and I'm going at a walking speed 😑.
Give us a call at (800)317-0479 and one of our specialist will be happy to help you with this issue.
sounds like a badly tuned carb
Adjust the idle screw. It sounds like the screw is not set right or the throttle may have not been assembled right. Triple check the throttle in the carb.
I agree with the comment about the tools used in this video but on the other hand compared to other videos I've seen this one is comprehensive and easy to understand. As I said in my last post this video saved me a lot of heartache. As far as the electrical there it's that much to it without getting into a technical explanation of how it all works. I personally just wanted to install the kit and get it running. So I would give this video an A minus which is still very good. Additionally FYI there is a lot of info on the internet on these motorized kits so spend some time and do some research before you get started.
I found this video to be perfectly instructional as well as helpful. Thanks for taking the time to create and post it :)
Just got one of these and mine came with the sprocket tool as well as the front mount piece you just put on your engine. So far pretty straight forward
u did such a good job with this video I think even an OLD Woman (like me : )
can fix my 2 stroke bike now!
Thanks 4 taking the time 2 do this & posting it on-line!
So I've went into the rabbit hole. Ordered the stage 4, got it.. inspected it and assembled. Now just waiting on my Nel Lusso to arrive. This is gonna be too fun
Of all the videos and info I've looked up considering these engines this is by far the absolute best there is. My bike is nothing like these new easier models lol. It's a fat butt Shwinn Stingray and I still got it mounted within an hour of watching this. Tho the electric wiring part could be a tad better in explanation as not all the engines come with those colors and it's rather easy for newbies to cross wires. Other than that absolutely awesome job on this 👍
Great video thanks! I'm just wondering if something was left out during the editing of the end of vid. The fuel mix ratio wasnt shown or described in any detail.
Keep it flat bro....
ua-cam.com/channels/PRPIP5uWB5cR8LgQq4qTDA.html
Someone please get these kids a set of wrenches for Christmas! And also have santa show them how to cut and use zip ties.
guy bodman ok boomer at least he’s working with his hands and learning
These kids did a good job stop hating
Cant agree more. It's a "how to Video". Pliers on a nut or bolt are not a good "how to",
Thanks man i'm almost sure i'm getting one and installing it myself now after watching this.
01309959995
GOD BLESS YOU..BEEN TRYING TO BUILD ONE OF THESE.IM WAITING ON A NEW KIT.. I REALY NEED IT TO WORK N FUNKION
Superlike, explained so well. Very informative video
I'm thinking about getting a motor bicycle setup for in-town travel.
This is a helpful video.
***** We love using our motorized bikes to get around the city as well!
BikeBerrycom i think mine is missing the coil and a couple other things and the spokes are in the way of the bolts
This is Great. Very well explained. But I must say the Part about the electronics was a little to fast. I just got myself a racing bike in pretty bad shape. I will restore it and add a motor to it :-)
Thanks for the video got my bike built in one day
I wanna do this does it still work
@@mrpotatoman5678 Yes
@@gameattack1989 k
I bought one of these motors for my mountain bike and find it fascinating that the parts that they now send out for different compared to what I had received back in the day. I guess they're trying to improve the motors functionality.
We were limited to 49cc with out getting a license. So I bought an 80cc engine and stamped it 49cc. So long as I never got caught going over 20 mph I was OK. My bike did a scary 29 mph.
This is a very useful video i actually enjoyed this instructional video
Anthony Hughes, Thanks!
Ca you upload a vid of how you do this on a
Mountain bike or can you try and explain to me of how it is done
KSpooners it’s similar but you won’t be able to change gears. if you keep your derailleur, but remove the cable it’ll work
@@arjunyeleshwarapu why cant you change gears. Mount the shifter behind the throttle, it has a set screw
Jacob Butler yeah that could work... ive kind of stopped using my bike cause of the chain constantly falling off bc its never aligned, and also gas leaks a ton with these things
Exactly the same as this one.
@@arjunyeleshwarapu ... Leaking from where ?
Fuel Line ? Heat up the line before putting it on either end. Once it cools it shrinks tight.
Pepcock leaking ? Tighten it. Still leaking ?
Gastank posts ? You over tightened the gastank posts to the frame...
best tutorial out there.... had I watch this the first time I would not be going back as I am now to correct things :)
thanks for taking the time to make this vid!
NFORSA you need to put the clutch in ride the bike and let go of the clutch the engine will start use the clutch
Mine came in today and I'm so excited. I'll update you when I put it together and tell you how it goes
How did it go?
My kit came in yesterday and I'm missing g alot of parts that the video shows it comes with... hope you had better luck.
Is this supposed to be some kind of joke…? Everyone knows that there isn’t a single person on earth who knows where their 10 mm socket is
This post literally sent a shiver down my spine.....its always a 10
I always know where my shit is
We went through 10, TEN sockets.
It's almost like they're disposable. One use.
Actually. I do. And I Horde those Shits Like Fuckin Diamonds. I have one simple rule. I don't lend out my tools... Period. Plus. I don't have kids... Soooo that's saving me a lot of heart ache...
is it just me?
or are the Handle bars "up-side down"?
NinjaViking1 yes, but if you look at pics of traditional "board track racer" bikes of a century ago, the flipped bars were "how they rode 'em". On a beach cruiser frame it gives that vintage look, especially if you wear a backward "duckbill" Tweed hat (or kangol), and round lens or "red Baron" goggles. Those puffy thigh riding pants too, lol. Style points count you know!
It’s just you
Tucking down helps weight distribution & with wind. This is a good compromise vs drops. Kudos to these guys.
Cables are not long enough
Had to do something. Also it will be nice when that wire tie breaks at the chain guard and it gets jammed up. Your asking for a crash!
Lastly, prepare for spokes to be taken out because the cheap ass China made chain twisted.
Around 110 years ago or so the motorcycle morphed out of the pedal bicycle fitted with an engine of one or two cylinders. The engines used were usually four stroke.
That's pretty cool history fact
I am watching in 2024
Same here might get one
When I put my sprocket on the spokes I did it by taking the rear wheel off the bike, fitting the sprocket, plates, bolts, rubber ect loosely then refitting the wheel to the bike to do the alignment.I find if you attach something to the bike's rear frame near the sprocket (ideally a DTI gauge but lol I held the hammer against the frame) and rest it on the big sprocket so its just touching, then turning the wheel it will let you see how much the sprocket is out by and let you adjust it in both up and down and left and right directions until you have it done up right. The manual with mine said the tolerance is 1.5mm (but not in which direction?) which was easy enough to achieve.
Gotta love the cracked motor mount to the frame at 6:35 - 7:25
Hi guys! Thank you, this is a great tutorial. It explains a great deal. I got a kit sold to me without the rubber spacers or the universal mounts and it just won't fit. Where can I get those so I can proceed with the build? Do you sell them separately? Thanks!!!!
amazon
Awesome video. Made my installation an absolute breeze.
Question: can these engines go out of timing? I did a test run, chain tensioner came loose, locked up chain. I fixed it and now don't have any spark... Thanks for any help yall
Might have damaged whatever part transfers the mechanical energy of the chain to the magnetic electric device.
Why am I the only person who wants to know how fast this thing goes?
Around 25-30mph
@@J_Jim-mo3ub That's wrong. A 66 cc (80/100 cc don't really exist for bicycles) can go up to 80kph or 110mph if tuned right and built right, out of the box it can go 50kph 80mph or faster.
@@darrylkinslow5613 One mph equals exactly 1.609344 kilometers per hour (km/h). refresh you numbers..
@@Dartoras Sorry I reversed it,Yeah, I wasn't going for exact, I was guessing. And one thing I do know for sure is that 50mph on the speedometer is about 80kph, so I' m not so far off. But I did mean kph when I said how fast the motor is. I remember catching a ride with U.S. citizens in Canada, they didn't know what kph was, so they were driving at around 110kph, lucky they didn't get stopped. But we got far, pretty fast.
@@darrylkinslow5613 I did not want to offend you, I live in the EU and with so much content in the US on the Internet, when I saw it, I thought it was just miss written
Thanks to this video I was able to fix the wiring on a bike that i just bought with brand new engine . Wiring wasn’t done right.
Great video! I have a white wire coming from motor. 50/50 chance of getting right. Does it go to blue or black? Thanks
#1 DON'T use a Zip tie for the Chain guard! It'll break off! Use a small hose clamp. #2 Use BLUE LOCKTITE on ALL NUTS AND BOLTS!!! Your Welcome
theone2be33 thank god, he should pin it so nobody gets hurt
You're welcome**
You are welcome ;P
Also you could just use a better zip-tie.
Thank you so much! This is really helpful. It is a very well organized video! 🙏👍.
at 20:00, you said the fuel ratio is as follows, but said and showed nothing? What's the ratio?
There seem to be various comments on the ratios. I have been reading the ratio should be 16:1 (8oz to 1 gal) and 20:1 or 24:1 for normal riding.
3 oz of oil per gallon
vilhis
Its 16:1 in break in (16 L gas to 1L Oil) and 20:1 after break in (20L gas to 1L Oil).
xTurboHD how do you put all that in a 1.5 or 2.5 litre tank sorry I'm a noob at this
i think its every 16 L gas its then 1 L oil
I'm currently mounting a similar engine on my 1970s cruiser bike and oh boy has it been a challenge but I think I'm almost done all that's left to do is the electrical and clutch
BEST VIDEO INSTALLATION GUIDE. WELL DONE THANKS AND MORE POWER TO YOU ALL
Great video. Very good instructions!
great video! am starting my build today and this helped so much
did you finish it ever? how is the bike doing?
@@walkerfharris built 4 since then with a 5th ready to be built. i using an rat bike with oversized frame and tires. just trying to figure out how to mount the engine
i think i am ready to do some commercial builds for resale. also bikeberry.com is a great source of parts and kits if you have not already checked them out
I was the 26000 subscriber! =D
So besides the kit, what tools do you need to complete this?
Just a 10mm wrench, and needle nose pliers?
What do you do for the electrical portion of your kill switch if it doesn't have any male ends to it, just open exposed wire?
I wish someone would design a brake caliper that would work with the chain drive sprocket.
Energy Nut grow up and do it yourself
Legends watching after 9year old😂😅
Guess what. Watching in 2024
Can you make a list of the tools needed?
I recommend adding 8 oz of oil for every 1 gallon of gas for the break in period(16:1)
i got this same engine for my schwinn occ chopper, kinda had to modify a little bit
I bought your stage 4 and I hate that sticker “this is made for racing” I tore that off and bought a 49cc sticker
That's to get around emissions laws, by classifying it as a racing part rather than a road vehicle part.
ua-cam.com/channels/PRPIP5uWB5cR8LgQq4qTDA.html
most helpful info on the net really helped me thanks a lot
What is the fuel ratio? It doesn't say...
Most agree around 35:1
Some people also say 40:1 but do what you think is best.
32:1
Is there any kit for a 20 inch bmx bike?
For example, the rear sprocket 44 tooth has burrs on one side.
These should be filed clean before the installation ! That could take up to an hour by itself. I did this with a small round file.
It will save your chain from exploding, and yes it has happened to me
Hi. I'm a paraplegic and use a wheelchair. I would love to do a build like this but I would have to start with something LOWER with THREE WHEELS. Kind of like a trike. Have you ever heard of this being done ??? and what are the chances of my success with this project ??? I'd greatly appreciate your info and advice if you are able to give it. Thank You. Sincerely, JAMES.
5 years and still waiting huh ? Damn i just subscribed too
Yes I have one but for a trike build I would recommend a 49cc 4 stroke engine if you want to ride in residential areas because near me they hate all my dirt bikes three wheelers and motorcycles etc.
Buzz Clark the 49cc 4 stroke kit has a pull start so you won’t have to pedal to start the engine
Curtis check my new comment
you will need an electric front hub motor to kick it over
Cool vid guys!!
Man oh Man , I really noticed this guys voice has that distinctive East LA Chicano accent , makes me home sick ... you probably did not even notice but it is a Hispanic Los Angeles Dude talking ! ... video was made in a suburb of Los Angeles !!!
Check out his other vids you will see and hear him
it is a very well made video ...I like the back ground music , cool marimba jazz lay back sounds ...LOL
Matthew Schurter , thanks!
rentatrip1 really appreciate it, man. Thanks for the kind words!
I wiegh 315 I'm a big guy do you think this motor would pull me along bad?
You will be fine I'm 260 and I've road a weaker engine at it its top speed
You'll be okay, but you'll look silly as hell
His tutorial works. was wondering why my gas bike it wasn't working... Was wondering why The idler was so painful to install... Destroyed an entire wheel but fixed it... Did you know that you can get these things to work for 15 seconds with the idler on backwards? Well I do now.
Thanks man I am not tool savey and this helped me understand my bike I was wondering what the little plastic part between the mortar and the exhaust was called
“Fuel ratio is as follows: Says and shows nothing “
lmao exactly
Ok so if watched a lot. First 2 gas tanks are 1:16 (example: 100ml oil, 1.6L Gas Permium. After those 2 tanks you can go 1:24 or 1:26. (Some even do 1:40 but idk about that)
Hope that helps :)
I hope I will help. First 2 tanks get 1 : 16 ration (100ML Oil and 1600ML Premium Gas. After those 2 tanks use 1 : 24 or 1 : 26 (your choice)
@@OlegAverin-nz2fe dawg i posted that 2 years ago
Are these legal to ride when you're under 16?
bob sacar They are legal!
Varies by state in USA over here in GA we need a learners permit at least be 16 and wear a helmet.
+BikeBerrycom in uk?
in canada
+joshua wagner no. In GA we need to be 15, have a learner's permit, and wear a helmet.
Love how the chain went from silver to black back to silver 😂😂😂
It's the evidence of magical editing.
Usually my videos aren't as clean as that.
Can you do it with a bike that has gears?
Subscriber # 39,264 looking forward to seeing y’all again
0:30 hahahaha I’m doing it on a bmx
Did it work
@@arablakba6988 yeah for 2-3 months then i rode it basically everyday i was adjusting the spark plug and snapped off the hook saving for a new plug and a pull start because the wheel size is 20 inches it has to be rolling down a hill to start
got the engine waiting on a bike lol
Danny Boy ua-cam.com/video/6D6pO_ZTtEE/v-deo.html
Other way around right here😂
Very good! Harbor Freight has some seamers that are well made but inexpensive. They make quick work of bending pliable brackets. Do you sell the link removal tool?
It helps a lot to see how some stuff gets done so you know how to do it thank you I'm trying to get in to it I am a new at all of this
What about the white wire? Comes oit of the engine block next to blue and black for spark. No mention anywhere for it in any instructions. Thank you and great video.
I got a gas powered kit from Bike Berry. I ordered the thick cushion motor mounts. This is an extra $15.00. The bolts sent in this Extra thing are too small a diameter. Other than that I give Bike Berry a Great Review. The gas tank has a small dent in it so I called their customer support and talked to Max. He treated me with kindness and respect. He asked for me to send him a photo of the dent. after 1 day I was contacted by them and they told me that they were very sorry that I ended up with a damaged part and they told me that they were going to send me a new 1. I got it in 2 days. I am happy I decided to trust these people. I know they care about me as a customer. I give them High marks. Too bad about those bolts. You will need to spend $2.00 for them. They are a 8 mm bolt with no head. Dont forget to get the nuts washers, and lock washers Dont forget to get Lock Tite. Also I must tell you I put this on a mountain bike with 10 or so gears. Just so you know it can defiantly be done. I will give them my continued business because they earned it when they showed me that they care about me getting a quality product. Kindest Regards James Gober
Glad to hear. Because my kit is missing lots of parts. And I emailed them. It's Saturday befor Columbus day. So I hope to hear from them by mid week. I also trust bikeberry. And will continue to do business with them.
What is your bike has front and back disc brakes
thanks for posting this video, it helped alot..over a million views!!... cheers
Your video was very helpful to me to finish my application on my bike am very pleased with it. Thank you much appreciate.
you should do a size comparison on a 48 cc 2 stroke engine vs a 80 cc 2 stroke
I like the Seth Bike Hacks type music. It fits well with video