How to Safely Clean a Pentair Clean & Clear® and Clean & Clear® RP Cartridge Pool Filter
Вставка
- Опубліковано 26 лип 2024
- Pentair Pool filters like the Clean & Clear® and Clean & Clear® RP Cartridge Filters have a large filter area for increased dirt capacity, and if the pressure gauge shows that the system is running at 8-10 PSI higher than its starting pressure, it is time for a cleaning. To ensure your Pentair pool cartridge filter is cleaned properly, you'll need to watch this safety video before diving in. Be sure to consult a pool professional before performing maintenance or attempting pool filter cleaning on your own, or call a pool professional if you’re unsure of how to clean a pool filter. Pentair cartridge filters, like many pool products, require that you closely follow the proper steps and procedures, and professionals know those best. However, if you do attempt to service yourself, this video will walk you through the safest and best way to clean pool filters. For your safety, please watch the video in its entirety before attempting any maintenance on the Clean & Clear Cartridge Filter or The Clean & Clear RP Cartridge Filter. Failure to follow safety warnings and instructions can result in severe injury, death or property damage. Reference the installation and user's guide or call to receive a printed copy at 800-831-7133. Your safety is our priority.
For more information, visit www.pentair.com/poolfiltersafety.
For pool professionals, this video applies to the following SKUs:
160354
160355
160353
160314
160315
160316
160317
160318
00:00 Introduction and Warnings
1:43 When to Clean Your Filter
2:25 Preparing to Clean Your Filter
3:05 Disassembling Your Filter
4:20 Cleaning Your Filter
5:18 Reassembling Your Filter
6:44 Restarting Your Pool System
7:42 Additional Safety Points When Restarting the System - Наука та технологія
You didn’t address one of the most difficult aspects… getting the cartridge off the insert.
Did u find the answer to your question? I am unable to separate the cartridge from the insert.
Why is it so hard to get the lid off and on again? It is really challenging for me 6:17
@@thechambersfamily5078 totally agree with you
I agree, sometimes this is near impossible! I have had to use a screwdriver to loosen the filter at the bottom, but this is not an easy process. Any tips?
I do get it apart, but I have to use a rubber mallet and bang around it for a while. Then it is still a challenge but eventually comes off
My filter lid will not come or no matter what I do.
I already removed the black ring, but the two halves refuse to come apart.