BIONICLE Movie: Toa Takanuva -"Ver.Bu"
Вставка
- Опубліковано 8 лют 2025
- I built Takanuva MOC.
I respected three Official-variations: Set, Game, and Movie.
and I share the Instruction! Feel the free!
(In Instagram, Mr.Faber liked this!)
Sounds by
-Maoh Damashii(魔王魂)
-TSAN / Audiostock
-Hiraoka Kotaro / Audiostock
-Regu / Audiostock
-Tezu / Audiostock
-Koukaon LABO(効果音ラボ)
This build is like if Figma made bionicle sets. The poise, the dexterity!
And that godly animation!
I love the design philosophy here. I remember at the end of G1 practically everybody was using similar designs using hand pieces to built the mid section and something like bhorok or metru matoran arms to form shoulder blades. A lot of people updated the Nuva Toa this way, but then the arms always needed to be built drastically different, and they would end up proportionally off. But man, you really matched the proportions and part silhoettes perfectly, even going so far as to designing the shoulder joint so it still uses the hand joint in the original orientation. Simple yet elegant. If Lego reinvents CBS again I hope they design new double jointed hinge pieces these elbows but sturdier, something easy to build off of with both technic and system, but still maximizing possibility.
Awesome animation, I love the set design and lighting! Nice MOC too!
Thank you!
the pillar has be written that "THANK YOU WATCH THIS VIDEO I LOVE BIONICLE ESPECIALLY TAKANUVA AND MAKUTA" lol
“you can no longer hide in shadow”
In case anyone wanted the list of parts, I think I figured it out. Please correct me if I'm wrong.
Technic Ball Joint
32474
x1
Technic Ball Joint with Through Axle Hole
53585
x12
Technic, Axle 2L Notched
32062
x7
Technic, Axle 4L
3705
x4
Technic, Axle 12L
3708
x1
Technic, Pin 3L with Friction Ridges
6558
x1
Technic, Axle 1L with Pin with Friction Ridges
43093
x2
Hero Factory Arm / Leg with Ball Joint and Ball Socket
90617
x2
Plate, Round 1 x 2 with Open Studs
35480
x2
Technic, Axle and Pin Connector Angled #1
32013
x2
Technic, Pin 3/4
32002
x2
Pneumatic T Piece Second Version (T Bar with Ball in Center)
4697b
x5
Technic Bush
3713
x1
Technic, Axle 3L
4519
x4
Technic, Axle 5L
32073
x1
Technic, Axle Connector Block Round with 2 Pin Holes and 3 Axle Holes (Hero Factory Weapon Barrel)
98585
x1
Technic, Pin 3L with Friction Ridges and Stop Bush
32054
x1
Technic Bush 1/2 Smooth
4265c
x8
Arm Mechanical, Exo-Force / Bionicle, Thick Support
98313
x4
Bionicle 1 x 3 Tooth with Axle Hole (Bohrok Eye)
x346
x2
Bionicle 2 x 3 Axle Connector with Tooth
42074
x2
Bionicle Foot with Ball Joint Socket 3 x 6 x 2 1/3, Rounded Tops
32475
x2
Bionicle Head Connector Block 3 x 4 x 1 2/3
32553
x1
Hero Factory Armor with Ball Joint Socket - Size 4
90640
x4
Large Figure Armor Plate Small
28220
x4
Plate 1 x 2
3023
x4
Plate, Round 1 x 1 with Open Stud
85861
x2
Plate, Round 2 x 2 with Axle Hole
4032
x2
Technic, Axle and Pin Connector 2 x 5 with 2 Ball Joint Sockets, Open Sides
47296
x2
Technic, Axle and Pin Connector Angled #1
32013
x2
Technic, Axle and Pin Connector Hub with 1 Axle
22961
x2
Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole
32184
x1
Technic, Axle Connector 2 x 3 with Ball Joint Socket - Open Sides, Angled Forks with Closed Axle Holes
32174
x9
Technic, Liftarm Thick 1 x 2 - Axle Hole
60483
x2
Technic, Liftarm Thin 1 x 2 - Axle Holes
41677
x10
Technic, Liftarm Thin 1 x 3 - Axle Holes
6632
x1
Technic, Pin with Friction Ridges and Pin Hole
15100
x1
Bionicle Head Connector Block Eye / Brain Stalk
32554
x1
Bionicle Chest Armor, Toa Nuva
43558
x1
Bionicle Mask Avohkii
44814
x1
Bionicle Shoulder Armor
43559
x2
Bionicle Weapon Staff of Light Blade
44813
x1
Yoooo why wasn't it like this the first time? I loved Bionicle as a kid but hated how we couldn't bend the knees or turn the heads without taking them off the socket
What an incredible moc! I am missing nearly everything other than the original 2003 Takanuva and have no idea what I need to buy in order to have all of these pieces. If you could make a list of items with the code for each piece, that would be awesome. No obligation though, I am just happy to behold your awesome moc and awesome stop motion. This video was incredible, thanks for making all this. It definitely put a smile on my face.
Incredible moc and even better animation. This is just outstanding, I hope everyone in the community sees this.
W O W this is amazing. how on earth did i not see this before!? one of the best stopmotions on the site, great job!!!
Most impressive. It's fully posable and stands as tall as the original Toa Mata/Nuva. Very nice.
Love the fighting scene, and the special effect for the page flipping. 👍🏻👍🏻
Coolest build for bionicle ever! Say, what are his shin and thigh pieces called?
These instructions and stop motions have unparalleled levels of charm and personality. I love it!
This is the best takanuva moc I’ve seen
I love how it looks, and i look forward to many mocists making the toa nuva and mata with this build.
Wow. Just...wow. Need to save this on my playlist. SO. DAMN. COOL! Also, I remember you from the Mata Nui sword; you had that evil laughter intro.
Great work, brother
3 years later and this is still getting attention! Great work! Is there a list that provides the item numbers for each of the pieces?
This is amazing, thanks so much for the instructions!
This looks awesome, great work as always Bukkey
great stuff here, I like how simple the end result looks. And the entire video is well executed.
My only tip, when aimating try and add a few more in-between frames on the coolest poses, like the beginning and ending of a strike. That gives you more wiggle room when editing the speed of the animations.
Keep at it. Instant sub
My Lord...you are a God amongst MOC makers, my friend! Amazing work.
When Takanuva goes badass against Rahkshi, Awesome Articulations you did there!
I watched your Krika vs Tahu video and it's really cool to find out you're still uploading.
Thank you!
BIONICLE will never end. I believe LEGO begins the G3.
You have a youtube channel??? and posting stop motion?!??!?!? This made my day
I'd love a part list.
Awesome MOC of my personal favorite Toa!! Bit of a longshot but you wouldn't happen to know what set that sort of flattish angular-white piece used to armor the front of the legs was from would you?
I'd like to recreate this Takanuva, but can't for the life of me figure out what that piece is 😅
www.bricklink.com/v2/catalog/catalogitem.page?P=28220#T=S&O={%22iconly%22:0}
here! ;)
THANK YOU!!@@IBURION
i like the MOC can you please list the parts or some if you can. i would like to build it.
Hey!! Did you ever figure out which parts are needed? I wanna try building him too.
I love this! The animation quality is great!
i love it-great job
HOLY COW this video is awesome!!!😀 Love the animation and effects work!!
Amazing work ! I hope you will keep on this !
This is incredible
That beginning was awesome 😮
The Rise of Takanuva.
really nice revamp
Its so good!
That's badass
Beautiful animation and revamp.
love this, will there be a similar video based off of makuta of metru-nui/teridax?
Amazing!
Dude this is awesome! Instant sub!
Ok, are we getting a video for that Makuta Teridax build too? It'd be great to see that in conjunction with this video...
Thats amazing
I’ve tried to build a toa mata moc, but had trouble with the shoulders. I never thought to use pneumatic t-bars for the joints.
Awesome
THAT EPIC
It's go great!
Can you do the other Toa Mata please? 😁
Brilliant design. I m wondering if you d like to make some moc on toa inika
Does anyone know the pieces item numbers?? I would love to try to make this myself, but I already know I'd need to order some pieces that don't come with the original
In bricklink,
- long-Hexagon armor: 28220
- leg's bone: 90617
I hope your building gets well!
@@IBURION thank you so much! So excited to recreate your work, it looks amazing!
@@IBURION Totally awesome animation and build! I have the 2003 Takanuva. Are the parts listed above the only ones you used that weren't included? Or are there additional parts? Just looking for clarification.
Are you going to make a video of your custom Makuta someday? It looks really cool!
Juts for some one wondering the total piece count is 117 pcs if this was a set
Can you make the revamp for the rest of the toa nuva?
What set does the white armor pieces come in? The white pieces for the legs and arm armor?
Could you show us how you made this set?
Awesome My Man.
✋😌👌
Also can I have the names of the songs please.
This Movie has 3 songs.
1:ttps://audiostock.jp/audio/22374 (by Regu)
2:ttps://audiostock.jp/audio/199480 (by Tezu)
3:ttps://audiostock.jp/audio/807676 (by Hiraoka Kotaro)
All songs are not-free, and you must pay to get them.
@@IBURION Thank you my friend. Keep up with the good work.
What’s your insta? Would love to see more especially the rest of the Toa Nuva
What's that symbol underneath the Rahkshi? 0:38
it's the Great Sundial's markings. in MNOG, it be appers also when Kanohi Hau works, and I choose it as a "Mysterious Symbol".
If you see this, I tried to build it on Studio 2.0 and so far aside from the program not fitting all parts flush I think I got the parts list right, *if you see this can it get pinned* (note the rest will be in the replies + all of these names I picked off from Studio):
legs (double the parts count for the other leg):
-Bionicle Mata foot
-2x technic ball joint with through axle hole
-Technic Axle 2L notched
-Hero factory arm/leg with ball joint and ball socket
-Technic axle and pin connector 2 x 5 with ball joint sockets, open sides (the ones before 2008)
-2x large figure armor plate small
-Round 1 x 1 with open stud
-Technic pin 1/2 with friction ridges
-Hero factory armor with ball joint socket (Size 4)
Arms (double the parts count for the other arm):
-3x technic ball joint with through axle hole
-Bionicle 2 x 3 axle connector with tooth
-Hero factory armor with ball joint socket (Size 4)
-Axle and pin connector angled #1
-2x technic axle connector 2 x 3 with ball joint socket (the ones before 2008)
-Technic Axle 4L
-Plate, round 2 x 2 with axle hole
-Technic bust 1/2 smooth
-Plate 1 x 2
Staff of Light:
-2x plate, round 1 x 2 with open studs
-2x technic axle and pin connector angled #1
-Staff of light blade
-Technic Axle 12L (tbf this was in the video)
1st part of the torso (but I doubled the pieces already so it's both sides and need to be moved for the specific sides) 2:52 :
-10x Liftarm thick 1x 2 - axle hole
-2x T bar with ball in the center
-3x technic axle connector 2 x 3 with ball joint socket (the ones before 2008)
-2x Technic Axle 1L with pin with friction ridges
-2x Technic Axle 2L notched
-2x Bionicle 1 x 3 tooth with axle hole
-2x Technic axle 3L
-2x Technic axle 4L
-Technic pin with friction ridges and pin hole
-Technic pin 3L with friction ridges
-Technic axle and pin connector perpendicular 3L with center pin hole
-Technic axle and pin connector hub with 1 axle
Waist:
-4x Arm mechanical, exo-force/bionicle, thin support
-3x T bar with ball in the center
-3x Technic ball joint with through axle hole (or do 2 of them + 1 normal ball joint)
-Axle 5L
-2x Liftarm Thin 1 x 2 axle holes
-Technic axle connector 2 x 3 with ball joint socket (the ones before 2008)
gearbox/back:
-Technic Axle Connector Block Round with 2 Pin Holes and 3 Axle Holes (Hero Factory Weapon Barrel aka that big thing that replicates the look of the gearbox)
-Liftarm thin 1 x 3 axle holes
-Technic axle and pin connector hub with 1 axle
-Technic bush
-4x Technic bush 1/2 smooth
-Axle 2L notched
-Axle 3L
-Technic ball joint
-Technic pin 3L with friction ridges and stop bush
Yo yo Piraka!
Now the stop motion is a bit meh but the effects are AWESOME keep going!
How much for this Takanuva set?
動画の最初と最後に
使われているbgmのタイトル教えていただけないでしょうか?
Yooo
i see you are using anime amount of fps