Get 3 high-quality products IN ONE CAN! 5STAR XTREME High-Build 2K DTM Primer

Rollback pricing is live! 🤑 STOCK UP NOW with special discounts on 5STAR XTREME High-Build 2K DTM primers and activators! Limited time only!
.
3 PRIME Colors! 😎
.
💥 5423 White (Gal)
💥 5424 Black (Gal)
💥 5425 Grey (Gal)
.
Get 3 high-quality products IN ONE CAN! Adjust your reducer to create:
✅ High Build Primer Filler
✅ Regular-Build Primer Surfacer
✅ Primer Sealer
.
Here’s what you’ll need:
.
5426 Activator (Qt)
5655 Urethane Reducer (Qt)
.
1️⃣ To create HIGH-BUILD PRIMER FILLER:
.
Simply mix the primer and reducer at 4:1
.
PRIMER FILLER 👉 CUSTOM & RESTORATION SHOPS = EXCELLENT FOR BLOCK SANDING ✨
.
.
.
2️⃣ To create REGULAR-BUILD PRIMER SURFACER:
.
Mix primer and reducer at 4:1
+
Add 1 part high-quality urethane reducer
.
PRIMER SURFACER 👉 GREAT FOR PRODUCTION BODY SHOPS! 💪
.
.
.
3️⃣To create PRIMER SEALER:
.
Mix the primer and activator at 4:1
+
Mix an additional 2 parts high-quality urethane reducer
.
.
.
WHEN SPRAYING ANY OF THESE MIXING VERSIONS:
.
Allow 10-20 mins flash time between coats
.
Allow 60-90 mins to sand (depending on temperature)
.
Can top coat in 30 mins
.
Of course, cooler temperatures will cause slower dry times
.
.
.
See your local distributor for availability! 💯
.
.
.
#explore #trending #autobody #collisionrepair #autobodypaint #refinishtechnicians #subscribe

[@jimdrechsel3611]

What is your step by step bare metal prep? How do you treat metal if there is suspect of rust pinholes that could not be removed by DA grinding? Please answer as if blasting is not the preferred option. Will epoxy primer seal out any oxygen to prevent rust from forming from pinholes that have been missed?
Thank you.

[@autobodysource]

Thank you for your inquiry on the DTM Primer, along with the question on how to prepare a rusty pinhole steel surfaces.
When removing and cleaning up rusty pinholes, the entire pinhole pit must be completely cleared of any rust
Sometimes … er, most of the times, DA sanding will not get down far enough to fully remove and clean the pinhole. DA sanding will work fine on very shallow, surface type pinholes.
Regarding deeper pinholes, we would recommend Sandblasting. Sandblasting is a great process to fully clean out rusty pinholes. However, be careful as to not over heat the metal, as it could cause warping of the metal.
The primer will seal out oxygen causing further rust, again only if the pinholes are completely cleared.