Your video was clear, concise and the right length for a lesson. You really make it easy to learn. The offset is a new concept to me, and it took a moment t understand its use, but when you demonstrated using the colors (pink & yellow) I then understood. The site you shared is awesome indeed...thank you for a great video!
Thank you for this video. My husband bought me a Silhouette about 2 years ago. After he watched me make tons of decorations by hand but I haven't had time to learn more than just the very basic functions. This is very helpful.
Thank you for sharing, the Wordmark tip just saved me hours of deliberation. I learnt lots of other tips too. Just beginning but you have set me up for success!
I loved this video within the first minute! I've been trying to decide what font I want to use for a vinyl project, so the website you mentioned is a huge help. There were other great Silhouette tips too that I can't wait to try. Now to pull this machine out of the box & learn it. Thank you!
This is a great tutorial. I just got my Cameo and I only want to start with cutting paper for cards, I don't want to do anything with vinyl and every tutorial I've seen and blog I've read deals with vinyl. I just want paper basics! This tutorial was very helpful.
OMGggggg!!! I am SO grateful someone shared your LINK with me!THIS is exactly what I have been looking for - not just What to do, but HOW, WHAT & WHY YES YES! I hope you have LOTS more Videos for me to follow! I have my First Ever Silhouette Cameo3. I know NOTHING except how to type a word - THEN WHAT needs to be done (and why) I had NO IDEA! How can you spend this amount of $$ on this equipment and there is no Manual is Crazy - especially the ULTIMATE BEGINNERS MANUAL, LOL. LOVE THIS - CLEAR, CLEAN, CONCISE! HOME RUN FOR ME ;)
Hi Kimber! Thank you for precise and informative directions! I am a complete "newbie" and probably taking on more than I should, but I'm gonna give this a shot. My letters are rather thin on the words that I'm attempting and I'm wondering if I offset will this help me attain thicker letters? The last example you gave was offsetting the yellow and pink letters. If I made everything the same color, would that make for a thicker font in the words that I'm attempting? My 3 words are Bar Fly Crew. I'm using the PT Serif Caption font. At this point I welded the letters, but I was thinking that off setting might be a better option. The letters/words are going on a clear flat Christmas ornament that's round and about 5 inches wide. Thank you so much for your help and Happy New Year!!!
Thank you so so much. I have had the cameo 2 for 3 years and only had 1 cut done on it, I found it all so confusing. This was perfection. Thank you, thank you.
Thank you so much for this video. It helped me so much. I just got my Silhouette Cameo and I have been having problems with getting letters to cut out the way I wanted. This showed me everything I needed. Thank you again!
Just got a silhouette cameo 4. Had a Pazzle that I used for banner letters that no longer works. I am having trouble getting the 1.5 inch letters with the silhouette that I need for the banners. It always goes back to 72.0 when I need 215.0 or 1.5 inches. How do I get the size to stay where I need it? Thanks. Your tutorial was great!
OMG Thank you for the wordmark website. That is AWESOME! So is this tutorial. I'm pretty new and feel like i'm just stumbling, there's very little obvious learning flow to this tool, even with other graphic tool experience. Thanks again.
Thank you so much for this video. I'm a total newbie. I haven't even done my first project yet. Of all the videos I've seen, I understand yours the best. I want to make a re-usalble stencil that is slightly longer than the mat. Do you have any pointers or know of a good video to check out? Thanks!
Thanks for talking slow enough to understand, for repeating things to be sure we get it, and for not "talking with your cursor" like people in other videos do (as if waving their hands around). Your style is easier to follow. Thanks.
Thanks so much for the tips...can't tell you how helpful this was for me. I am just learning and your little video taught me quite a bit...thanks again!!
Thank you this was helpful. I am having issues with cutting the vinyl. Can you do a video on how to cut words? I can cut pictures but when i add wording my silhouette says register failure. Thank you
Great video. I've had a Cameo for approximately 9 years. It is somewhat user friendly but to get the most out of it I need help. Thank you for giving that help. I really like the wordmark.it tip.
Hey Kimber! Thanks for your great tutorial on using tText in Silhouette Studio! To be honest, I got an early version of the Portait back 2016 I think.. however, due to having to move my address so many times, my silhouette stuff has just boxed up and away for so long. Quite frankly, a lot of my silhouette stuff has gone missing (incl. cutting mat, cutting blade, tools etc and I am starting as a newbie. There is so much much new stuff out that frankly I don't know where to begin and what sort of cutting files you can use on basic Silhouette Studio. I have a Windows 10 laptop. Would you please advise me as to where to start!? Do I have to use vinyl etc? Help!!!!
This was so helpful. If I may ask a question regarding text, please. When using script fonts with glyphs, a blue line appears under certain words/names - indicating a misspelled word. I've tried adding them to the dictionary but it doesn't seem to accept the word and the blue line remains which then also prints. Do you have any suggestions? Thanks so much!
Hey great video. When you release the compound path how can you get the txt box to work again to over write the words, I keep getting the anchor points coming up again instead on the blue text bar 🤔 x
Great video but am stuck on trying to figure out the subtract method of a word within a shape. I have played around with it but not sure what text works best to achieve this. Could you send some tips.
thats the best tutorial ever...after having the silhouette for 2 years on my desk.and never use it, .now i learned something. . MY grandson bday is coming soon .can u show us how to do a bday banner .for example like 1month.2 month, etc. and add a photo too.
i just got mine too......my advise to u is to be brave and play around with it.......dont be afraid to screw up......lots of hands on and u cameo will be your best friend. good luck ladies
Thank you. I like many others below have had my machine for years. The software is intimidating and I have not been successful in creating anything really useful. I am looking forward to trying your step by step tutorial. Thank for for being so clear! Wish me luck! :) I have subscribed and am looking forward to watching your videos.
Thank you ! So very well explained . How do I make really fine letters for a heat transfer without them breaking when i peel the layer off ? Thank you so much
I use the word mark it but mine does not look like that or nor does it do some of what you do. Is that because you pay? I would pay because that is so worth it. Please let me know so I can go ahead and get it. Thank you and thank you for this wonderful video
Since the D and the rest of the word is separate, will it cut it like that or will it be cut as one word? I'm trying to cut out names for place settings and I want to make sure I can cut it as one word. Thanks for the help!
That font website is awesome...but it doesn’t show all my fonts only the general fonts on word not the ones I’ve downloaded how do I get the extension to see every single font?
When I got mine, someone suggested Cameo Cutter - Heat transfer vinyl by Brad Martin.....perfect. He explained everything right from the beginning. I think some of these tutorials are confusing,.....they show how to cut and apply your work onto your product, but don't show how they designed it on the computer. grrrrr
If I wanted to add a picture under the lettering and not necessarily layer but have the picture cut around the letters going through it, how would I do that? I am a beginner and am just wanting to figure things out. Thanks!
thank you so much :-) i am playing around with the software now before getting my machine so when i get it i will be good at this. I got some really good tips here.
Any idea why worlds would be cutting on top of each other when printed? They look fine on the screen but when I send it to the cameo the bottom line is on top of the last word. On screen it’s all within the printing/cutting area. I was using Bluetooth to print if that makes a difference. Thanks!
I have the Cameo 3 and I have been trying to cut stencils for cookies. I cannot seem to get letters like the O, P, R, D, etc to cut correctly. I have tried bridging and still no luck. The O & The D completely cut out so all I have is ab Oval for the O, etc. How do I get it to cut the outline without the center of the D? Can you do a tutorial that shows what the stencil looks like after it’s cut?
Hello I have Cameo 4. I like how you have your toolbar closer to the left of your panels how can I do that. Even notice your tabs at the bottom of your screen..please help! Thank you!
can you help me with cutting out a design that has a image plus lettering? I want to remove majority of the back ground and just print what I have in letters and image.
Oh. My. Word. That font website is such a game changer. Thank you sooooooo much!
Best, solid, no nonsense tutorial this Newbie has found so far.
Your video was clear, concise and the right length for a lesson. You really make it easy to learn. The offset is a new concept to me, and it took a moment t understand its use, but when you demonstrated using the colors (pink & yellow) I then understood. The site you shared is awesome indeed...thank you for a great video!
Enjoyed the clear & quick way you explained this topic. Now have the confidence to work inside of Silhouette Studio. Thanks
you have helped me more in this one video than the hundreds of videos that i have watched already. thank you..
I just got my Cameo 4 and you have no idea how much this video has helped me! Wow I'm so glad I found you, thank you!! 😃
You are the best channel on UA-cam, SO MUCH INFO. Thank you for sharing.
Thank you for this video. My husband bought me a Silhouette about 2 years ago. After he watched me make tons of decorations by hand but I haven't had time to learn more than just the very basic functions. This is very helpful.
Wow. Thank you. Been searching and searching videos and finally came across this one. Awesome!!!! Helped me so much!!!
Thank you for sharing, the Wordmark tip just saved me hours of deliberation. I learnt lots of other tips too. Just beginning but you have set me up for success!
EXACTLY what I needed to get started! Simple and clear instruction. Thank you so much.
I loved this video within the first minute! I've been trying to decide what font I want to use for a vinyl project, so the website you mentioned is a huge help. There were other great Silhouette tips too that I can't wait to try. Now to pull this machine out of the box & learn it. Thank you!
thank you for covering how to print the layered type of image. using two colors are so cool and I knew they couldn't be that complex to cut...thanks!
I’m not sure if you mentioned this or not but are you using designer edition now I know you can do the offset in basic addition as well
I love that Wordmark tip!! Thanks for sharing!!
That alone was worth watching! Great tip!
This is a great tutorial. I just got my Cameo and I only want to start with cutting paper for cards, I don't want to do anything with vinyl and every tutorial I've seen and blog I've read deals with vinyl. I just want paper basics! This tutorial was very helpful.
OMGggggg!!! I am SO grateful someone shared your LINK with me!THIS is exactly what I have been looking for - not just What to do, but HOW, WHAT & WHY YES YES! I hope you have LOTS more Videos for me to follow! I have my First Ever Silhouette Cameo3. I know NOTHING except how to type a word - THEN WHAT needs to be done (and why) I had NO IDEA! How can you spend this amount of $$ on this equipment and there is no Manual is Crazy - especially the ULTIMATE BEGINNERS MANUAL, LOL. LOVE THIS - CLEAR, CLEAN, CONCISE! HOME RUN FOR ME ;)
Thank you very much! I just got a Silhouette Cameo 3 & am trying to learn how to use it. You did a very nice job explaining all this!
Hi Kimber! Thank you for precise and informative directions! I am a complete "newbie" and probably taking on more than I should, but I'm gonna give this a shot. My letters are rather thin on the words that I'm attempting and I'm wondering if I offset will this help me attain thicker letters? The last example you gave was offsetting the yellow and pink letters. If I made everything the same color, would that make for a thicker font in the words that I'm attempting? My 3 words are Bar Fly Crew. I'm using the PT Serif Caption font. At this point I welded the letters, but I was thinking that off setting might be a better option. The letters/words are going on a clear flat Christmas ornament that's round and about 5 inches wide. Thank you so much for your help and Happy New Year!!!
Thank you so very much for a wonderful tutorial! Now I know how to do a shadow and how to cut them separately! Thank you again!
Thank you so so much. I have had the cameo 2 for 3 years and only had 1 cut done on it, I found it all so confusing. This was perfection. Thank you, thank you.
Very Helpful! If you have several lines of text how do you evenly space the lines? thanks
Thank you so much for this video. It helped me so much. I just got my Silhouette Cameo and I have been having problems with getting letters to cut out the way I wanted. This showed me everything I needed. Thank you again!
I just got my Silhouette and this was an awesome Video to teach me about the welding and how to select fonts..
I wish I would have found you about 20 videos ago 😂 your tutorial is a-mazing!
Love your UA-cam so helpful and you explain just how I can understand it and showing the task at hand great. Thank you so much.
Just got a silhouette cameo 4. Had a Pazzle that I used for banner letters that no longer works. I am having trouble getting the 1.5 inch letters with the silhouette that I need for the banners. It always goes back to 72.0 when I need 215.0 or 1.5 inches. How do I get the size to stay where I need it? Thanks. Your tutorial was great!
How do you size font in studio. Beginner here. Doing a stocking board and want all the names the same size. Thank you.
this is the best text video! hope you’re still Cameo-ing 🥰🥰🥰
OMG Thank you for the wordmark website. That is AWESOME! So is this tutorial. I'm pretty new and feel like i'm just stumbling, there's very little obvious learning flow to this tool, even with other graphic tool experience. Thanks again.
I just got mine today. I can’t wait to try this. Thanks. Great instructions!
Thanks Kimber, I just got a Cameo 3 and trying to learn a few things. Your video was very helpful. I really like the font site tip too.
Great video! I'm trying to get back into this again and this refresher was awesome. I'm subscribing to your channel!
I've watched a lot of videos, you made it very easy to understand! thank you so much for sharing your knowledge!!
Thank you so much for this video. I'm a total newbie. I haven't even done my first project yet. Of all the videos I've seen, I understand yours the best. I want to make a re-usalble stencil that is slightly longer than the mat. Do you have any pointers or know of a good video to check out? Thanks!
Great instructional video. Was very easy to follow and I liked they way you recapped it at the end.
Great video! Thanks! Best Silhouette video I've seen thus far.
Amazing video! So helpful!
Thanks so much. I'm a super beginning beginner & this was terrific!! Very overwhelming & I'm going to attempt. Yay!!
This such a great video! Very helpful and easy to understand.
Thanks for talking slow enough to understand, for repeating things to be sure we get it, and for not "talking with your cursor" like people in other videos do (as if waving their hands around). Your style is easier to follow. Thanks.
This is awesome! I am new and this helped me alot. Thank you so much!
Thanks so much for the tips...can't tell you how helpful this was for me. I am just learning and your little video taught me quite a bit...thanks again!!
New subscriber here 🤩 I'm new to Silhouette. Your video is very helpful. Thanks for sharing 😍
Extremely helpful!!! Thank you so much!!
Good detail. Some fonts I can not weld. They don't cut in one piece. Any suggestions?
Concise and informative for a newbie to Silhouette. Thank you.
Thank you so much! I have struggled with words but you made it so understandable. Can't wait to try this.
Nice video. This is exactly how I need it to be explained. Thank you so much.
So helpful!!!! A million thanks!!!!
Thank you. You know your staff. Well said and very clear. Thank you
Thank you this was helpful. I am having issues with cutting the vinyl. Can you do a video on how to cut words? I can cut pictures but when i add wording my silhouette says register failure. Thank you
I just got my first silhouette Camino can't wait to get started ❤🤗 I'm sure I will have a lot of questions lol TFS
Great video. I've had a Cameo for approximately 9 years. It is somewhat user friendly but to get the most out of it I need help. Thank you for giving that help. I really like the wordmark.it tip.
I love this video, I'm new at using this program and you explained it well, thank you!
Thanks for this short, to the point video. It was really helpful for me on my second day using my Cameo 3.
Hi. New to silhouette. How would be the easiest to curve letters and putting circles around an set of words.
I never knew that extension for chrome existed. Thank you so so much for sharing the wordmark.it hint. FANTASTIC
Hey Kimber! Thanks for your great tutorial on using tText in Silhouette Studio! To be honest, I got an early version of the Portait back 2016 I think.. however, due to having to move my address so many times, my silhouette stuff has just boxed up and away for so long. Quite frankly, a lot of my silhouette stuff has gone missing (incl. cutting mat, cutting blade, tools etc and I am starting as a newbie. There is so much much new stuff out that frankly I don't know where to begin and what sort of cutting files you can use on basic Silhouette Studio. I have a Windows 10 laptop. Would you please advise me as to where to start!? Do I have to use vinyl etc? Help!!!!
Is the program free or it costs to join? I have a cameo3 and had trouble do buying from someone who already had it registered...ty
I am so glad I found this. I went thru so many vinyl sheets. the silhouette manual is too confusing. I much prefer the tutorials
This was so helpful. If I may ask a question regarding text, please. When using script fonts with glyphs, a blue line appears under certain words/names - indicating a misspelled word. I've tried adding them to the dictionary but it doesn't seem to accept the word and the blue line remains which then also prints. Do you have any suggestions? Thanks so much!
Thanks for the tutorial, it makes it easier to understand.
What version of Silhouette Studio are you using? it looks very different from the one I got with me Cameo 4. thanks.
Yes I’d like to know as well
Hey great video. When you release the compound path how can you get the txt box to work again to over write the words, I keep getting the anchor points coming up again instead on the blue text bar 🤔 x
Great video but am stuck on trying to figure out the subtract method of a word within a shape. I have played around with it but not sure what text works best to achieve this. Could you send some tips.
Thank you, great tips for a beginner like me
Thanks for sharing your Silhouette knowledge. How do you skew text to look like an over exaggerated italic?
thats the best tutorial ever...after having the silhouette for 2 years on my desk.and never use it, .now i learned something. . MY grandson bday is coming soon .can u show us how to do a bday banner .for example like 1month.2 month, etc. and add a photo too.
I can do everything you covered but I need help filling in the font. Thank you
How do you do numbers as in 100? Do you weld them group then send to cut after you get it like you want?
Informative video, thank you!
Ok so I just got my silhouette and I'm so confused. I've watched many tutorials but I'm still so confused! Any suggestions
janice barbee me tooooo😫
i just got mine too......my advise to u is to be brave and play around with it.......dont be afraid to screw up......lots of hands on and u cameo will be your best friend. good luck ladies
I am too! I'm on a Mac and I am having trouble with going from my files in Mac going to Silhoutte...UGH!!!
Just got mine too. Im watching alot of you tube to get my feet wet.. im sure once you use it, it gets easier
I am in the same boat lol ive had it for 4 days
Also - are your Tutorials compatible with the newer Cameo 3?? (icons, etc)
Love your instructions!!!
Thank you. I like many others below have had my machine for years. The software is intimidating and I have not been successful in creating anything really useful. I am looking forward to trying your step by step tutorial. Thank for for being so clear! Wish me luck! :) I have subscribed and am looking forward to watching your videos.
Thank you ! So very well explained .
How do I make really fine letters for a heat transfer without them breaking when i peel the layer off ?
Thank you so much
I would create a tiny offset to thicken them up just a bit if you have having trouble with it.
Super Helpful!!! Thanks for such a great video!!!
I use the word mark it but mine does not look like that or nor does it do some of what you do. Is that because you pay? I would pay because that is so worth it. Please let me know so I can go ahead and get it. Thank you and thank you for this wonderful video
Since the D and the rest of the word is separate, will it cut it like that or will it be cut as one word? I'm trying to cut out names for place settings and I want to make sure I can cut it as one word. Thanks for the help!
Super helpful! Thank you!!
Thank you!
This was such a great, easy, tutorial!
That font website is awesome...but it doesn’t show all my fonts only the general fonts on word not the ones I’ve downloaded how do I get the extension to see every single font?
When I got mine, someone suggested Cameo Cutter - Heat transfer vinyl by Brad Martin.....perfect. He explained everything right from the beginning. I think some of these tutorials are confusing,.....they show how to cut and apply your work onto your product, but don't show how they designed it on the computer. grrrrr
Can this machine be programmed from a laptop and can it cut a 16 inch circle at 40 mil thickness
If I wanted to add a picture under the lettering and not necessarily layer but have the picture cut around the letters going through it, how would I do that? I am a beginner and am just wanting to figure things out. Thanks!
Lisa Lathrop me too
thank you so much :-) i am playing around with the software now before getting my machine so when i get it i will be good at this. I got some really good tips here.
Thanks your a great teacher just subscribed 👍
How do I cut a filled in text? I’m brand new with silhouette and don’t know anything about it yet I’m playing around and trying to learn.
Any idea why worlds would be cutting on top of each other when printed? They look fine on the screen but when I send it to the cameo the bottom line is on top of the last word. On screen it’s all within the printing/cutting area. I was using Bluetooth to print if that makes a difference. Thanks!
Very good tutorial! Thank you.
I have the Cameo 3 and I have been trying to cut stencils for cookies. I cannot seem to get letters like the O, P, R, D, etc to cut correctly. I have tried bridging and still no luck. The O & The D completely cut out so all I have is ab Oval for the O, etc. How do I get it to cut the outline without the center of the D?
Can you do a tutorial that shows what the stencil looks like after it’s cut?
I also would like to know how to do this.
what about sizing how do you know how bug or small to make the text?
Hello I have Cameo 4. I like how you have your toolbar closer to the left of your panels how can I do that. Even notice your tabs at the bottom of your screen..please help! Thank you!
Awesome video for this newbie!!
Is there a way to make a font that is normally skinny, a little fatter size? Hope that makes sense.
can you change each letter to a different color?
Would you please show/explain how you selected by color to separate them. I only have the basic software. Thank you.
can you help me with cutting out a design that has a image plus lettering? I want to remove majority of the back ground and just print what I have in letters and image.
Excellent tips! Thank you!!