Thank you for taking the time to make this a tutorial! This is one of the best cages I've ever seen; not to mention the best proper roll cage tutorial I've found thus far.
yooo, i started watching your videos by the time you had 2 240sx and now you have this monster, what the fuck happened now your a fucking pro, before you were even taking lessons holy shit!!! congrats man i think ill get even more addicted than i was b4
the tube extension was aimed perfectly but next time make sure you leave a small gap between them so the weld get's properly between the two pieces and makes the connection a lot stronger.
I paused at the mig wire in windshield part. Pictureframe wire is woven rather than solid so it has more "cutting" edges and pliers make awesome handles to avoid messing up your hands.
would ya recommend making your templates from PVC next time around ? or do you think that would limit your options for angles needed to fit tightly ? wicked build and great info, always looking forward to new videos!
+james harrison Limit options and it also doesn't give me the needed measurements to use for the bender so honestly doesn't seem like it would be that helpful.
+lol wut Yeah I saw him put a dimple die on a base plate and make a strut tower brace that only connected to two out of 3 bolts of the strut and didn't clamp down fully around the tower. So far not a fan of his work.
+TheRebel3000 I painted it when I had the cage dropped to weld around the top. No making though haha just rattle canned it and hoped for the best lol. There's still over spray but not a big deal since the interior is getting painted
My dad and I tried learning to bend tubes for a front bash bar for a customer that has a R32 and it is so more complicated to bend than it looks and we have a hydraulic bender lol
Shhh let's not talk about that haha. Nightthrill (Vegas guys) came out at the end of finals week. Let's just say there was very little studying happening and a lot of working on my car that did...
+OffBeat Garage c'mon, ive seen your snaps, i kno you already waist deep on The Creditcard, a little bit more wont killya ;) nah for real breh, you did that incredibly well, and by The looks of it, with minimal damage. ive seen guys fail much more miserably here on yt *cough* bisforbuild *cough*. hats of to you Adel!
Smashed it on a trash can, the nail turned purple/black underneath, so then i painted it with a beige nail polish so it didn't look like I had a disease when going to school hahha
OffBeat Garage awesome thanks dude, I think I might try to make some side hoops along the lines of MA motorsports. When are you planning on doing the rest of the cage videos?
2 videos in 1 year?! this is insanity
legend hass it the beautiful goddess adel will say i love you back
Love you
Always use safety glasses when working on windshields! When the windshield cracks, glass is flying everywhere. Cool vid btw!
Thank you for taking the time to make this a tutorial! This is one of the best cages I've ever seen; not to mention the best proper roll cage tutorial I've found thus far.
Thanks man, glad you find it helpful :)
When u upload it brings a smile to my face
This car/cars has come a long way man. Been here from day one. Love the build. Keep up the good content
Finally! I bought a 240 because I got tired of waiting for your videos...
more car builds after the 240 so much fun to watch
LOL at 7:16 I love how he trips and then just plays it off by saying " okay.... " then starts shaking the pen 😂😂
Nice, it's always good to see your snapchats. Fueled by Passion was sick also. Keep it up!!
like B4 watching as always
yooo, i started watching your videos by the time you had 2 240sx and now you have this monster, what the fuck happened now your a fucking pro, before you were even taking lessons holy shit!!! congrats man i think ill get even more addicted than i was b4
Yo I literally wait in hands to watch this guys video keep it up @offbeatgarrage
I think its amazing that the 240 looks so fierce but its still NA. KA turbo would be badass.
Heeeeeeeeey finally more frequent updates :D love your channel
Step by step this car become an amazing drift car man!!! And maybe with an rb 26 dett or a vr 38 dett colub be perfect! 😜
my dude offbeat, u made my day at Pepboys
When could we expect a hydraulic handbrake install vid?
the tube extension was aimed perfectly but next time make sure you leave a small gap between them so the weld get's properly between the two pieces and makes the connection a lot stronger.
Takin out the windshield I was like "WEIGHT REDUKSHUN BREH!"
Love your videos been here since day one
Ayyy what it do
Amazing still! Keep it up
You've stepped up your sandal game since the start of this channel bruh
Love the new vid like always 👍🏼💥
I paused at the mig wire in windshield part. Pictureframe wire is woven rather than solid so it has more "cutting" edges and pliers make awesome handles to avoid messing up your hands.
Yep I switched to pliers right after that haha. Thanks for the info :)
Nice 86 shirt!
Thanks!
so is the cage almost done and once it is will you be doing painting or the engine
would ya recommend making your templates from PVC next time around ? or do you think that would limit your options for angles needed to fit tightly ? wicked build and great info, always looking forward to new videos!
+james harrison Limit options and it also doesn't give me the needed measurements to use for the bender so honestly doesn't seem like it would be that helpful.
6.0 dually is life offbeat come on man
Dope video
Cutting wire has a rectangular shape or is a twisted pair which makes it work.
Ahhh, good to know! Thanks :)
When you gonna swap RB26 in the 240?
backwards entries. dayyuuum
Have you been on "The fabrication series" youtube channel? His step by steps on a full cage and tubbed 240 are awesome.
+lol wut Yeah I saw him put a dimple die on a base plate and make a strut tower brace that only connected to two out of 3 bolts of the strut and didn't clamp down fully around the tower. So far not a fan of his work.
Ooohhhh midnight or Turquoise blue with white or black wheels mmmmmm
love this videos!!!!
theese*
How in god's name did you paint the hoop? Did you mask the entire interior to do it?
+TheRebel3000 I painted it when I had the cage dropped to weld around the top. No making though haha just rattle canned it and hoped for the best lol. There's still over spray but not a big deal since the interior is getting painted
I love you and your car, if you ever bring it to the UK let me know im a vehicle photographer
Will do! Thanks :)
+OffBeat Garage check me out???
adamc-photography.wix.com/adamcoleiro#!portfolio/c1han
Dope pics!
+OffBeat Garage thanks man 😀
2:32am when i go to sleep i get a message , and then im like breeeh... fuck... and here I am
Where's the epic intro at mang ???
I want it back !
Harbor freight sells a thing that cuts through the sealent of the window
When are you gonna start engine mods?
Is there much paperwork involved in terms of keeping this beast road legal?
Nope, you just register it like any normal car
Only if you swap the engine.
^even then we just register it like normal. Not the legalist thing but it works haha
Was this filmed before your snap of the built not bought sticker? Because I still see it haha
Update: Saw the removal on Snapchat
Yep hahah just removed it this morning
My dad and I tried learning to bend tubes for a front bash bar for a customer that has a R32 and it is so more complicated to bend than it looks and we have a hydraulic bender lol
If you measured & had pre cut labeled tubes, with these videos I honestly think you can sell these cages
1k subscriber squad
i have almost full exhaust from isr for my genesis and i didnt get not one isr sticker..... :(
Are you gonna keep just a ka or do a swap
KA and turbo it
r u gonna flock ur dash?
If u ever need a paint job and you are in Texas I will hook you up my dad owns a paint and body shop
I approve
when did he paint the car
Early comments SQUAD!!
yeeeeee
again will this work in a s14
What did you paid for the new windshield xD ?
+gigagames $100 or $120 installed. I forgot haha
what welder do you use?
Yo, how'd you do on your classes this past semester?
Shhh let's not talk about that haha. Nightthrill (Vegas guys) came out at the end of finals week. Let's just say there was very little studying happening and a lot of working on my car that did...
+OffBeat Garage haha, right on man I understand! I am a fellow Cal State student
Sweet! Which one?
+OffBeat Garage Long Beach
+OffBeat Garage Los Angeles
Is this also a street legal/daily car?
+King Cole Not daily but street car yes
+OffBeat Garage that's cool man keep up the good work car is really looking fire
Thanks!
notification gang wya?
previous owner of one of our 240s tried removing the windshield and shattered it lol
Nikita talked !!!! OMG
What engine are u gonna swap in? I hope ur not keeping the ka
+DR:Snaggens Turbo KA
Flock the dash man
+Angel garza Dash is getting the cracks filled and the entire thing wrapped once the car is painted.
‘Remove the wipers' could've done that in episode 8
What are your plans with the engine ?
Turbo
+OffBeat Garage quick bonus vid for your dream motor setup.
You want me to make a video talking about that?
+OffBeat Garage yes
Breeehhh
Could you build me an fd spec cage in a 350z
where do you buy your tubing
+Tomas Bannon Industrial Metal Supply
the wire is a method used in shops to take glass out but you could have bought the actual tool would have made it a little better :)
Yeah haha just really broke and nothing decent in the price range I had haha
+OffBeat Garage c'mon, ive seen your snaps, i kno you already waist deep on The Creditcard, a little bit more wont killya ;)
nah for real breh, you did that incredibly well, and by The looks of it, with minimal damage. ive seen guys fail much more miserably here on yt *cough* bisforbuild *cough*. hats of to you Adel!
Hahahah this is what got me so deep in the first place haha. Thanks man :)
Hail Hydra
*salutes*
Brehh!!!
what happen to your pinky?
Smashed it on a trash can, the nail turned purple/black underneath, so then i painted it with a beige nail polish so it didn't look like I had a disease when going to school hahha
+OffBeat Garage Savage lol
Anybody know any cheapish wheels that would look good on a DA Integra?
+Josh McDermott XXR and Rotas are pretty solid looking cheap wheels
+OffBeat Garage that's what I was planning on lol idk any specific ones except for the Grids
I mean there's a pretty solid amount of choices from XXR that look good. Also you got STR wheels, JNC, and Avid.1 to choose from.
+OffBeat Garage sweet man thanks!
where is nikita from?
Mother Russia
+OffBeat Garage thought so, I love his accent.
cyka blyat
Should have just bought the cutter tool. Would have saved time and hurt hands
if I give u a 1j would u swap it
Yes
what state do u live in
+kion frank California
oh that's really far
Le drift car?
Can you hurry up and upload more videos Adel this video is like 2 months old xd probs more lol
i am proud to say i have no cracks in my dash...that is a random statement
I left a GTA V Heist just to watch this.
first twice in a row
Waiuku life!
Haha yoza
I came from snap
those wheels are sex
earlycomments
1500 bucks and u'd get one without all that hassle
+Leofred $1500 cages aren't built right. I know cause I've seen a dozen of them in person and even more online and I wouldn't waste my money on one.
Nikita is so tired..
+Cαδρεπ Gαmιηg YT Yep haha most of the build was done between 8pm and 7am haha
+OffBeat Garage haha ik I'm always on ur snap chat..
haha yaasss
This is kinda boring
I would Like to see the UPGRADES
I know you have to do this
And you have to make vids , but do you know WHEN the Upgrades begin ?
+Triple CZ Upgardes are pretty basic and take like a day to bolt on lol. Once all the fab work is done then those one day upgrades will happen
My opinion if you're not sponsored don't advertise with stickers what you have in the car
how did you measure the offset on the side hoop? did you put the level on the end and the top of the tube?
Yeah, take a level across the bars that are bent and then rotate until you get the desired angle you want.
OffBeat Garage awesome thanks dude, I think I might try to make some side hoops along the lines of MA motorsports. When are you planning on doing the rest of the cage videos?
Within the next 2 months is the plan. Leaving for the next 3 weeks for SEMA and japan so can't get much work done.
OffBeat Garage cool dude. Hope you have a great time!
Thanks!
Sweet vid