+NotIrishRider well it was in the previous video w curbbangers as its pretty much done now just he adds little stuff more and more.if you follow,his snaps you understand what i mean.
Offbeat is awesome!!!!!!! One of the top 240 sx drifting build channels!!!!!! One question do you plan to turbo the ka with the ISR turbo kit for more power for drifting??? its reliable not overly extreme for the ka
how are you getting full welds all the way around the cross brace. I think you over thought the item in 4:50. If you're really worried about roll over then just build a funny car cage.
Whats your plan for an engine after you learn on this one? You gonna go turbos or V8? Personally I would go V8 because its more reliable and less maintenance and less stress on the motor
+UGL Fizzy Felt out of place a lot to me, added substantial time to the editing process, often had copyright issues with songs claimed as "copyright free".
Offbeat - How were you able to fully weld these bars with the figment? There is no way you got a mig in between the roof and the bars. The video never addressed this either. I would be concerned if their isn't complete welds as it compromises your safety.
+ScottieDawg333 The front base plates get removed and the cage drops down and forward for me to fully weld around the cage. This isn't addressed yet because there will be an episode dedicated to welding the entire cage and this wasn't that episode haha. Thanks,
Never really understood that. As long as I'm on a solid path, living with good morals and attitude and putting my time towards something constructive then my parents will support it. And when I'm a parent I'll do the same with my children. Simple concept to letting your child follow their passion and be successful imo.
He's gonna after he tunes the suspension and makes sure everything is working the way it's supposed to be, then he's gonna go for a JZ swap or turbo the KA I think.
This series is KILLER. Amazingly high quality content. Too bad this stuff goes way over the heads of the lowest common denominator car enthusiast, otherwise you'd have the subscriber count you deserve. Keep it up, dude.
He's spent more time building a drift car the he has actually learned how to drift properly. Learn how to do it well first, then build a car. Not the other way around
+DomesticGarage! Can't control everything in the world. Couldn't afford to keep the other car on the road and drifting. Original plan was to still drift the grey car while building this car so that way when this car was done I'd be good enough. But can't control everything so have to make do :)
Got 100s laying on the floor. I knew you were a baller mane.
I love when people build proper cars
Hunnids on the floor ballin!
We need more curb bangers collabsss
Finally!!!! this car is the inspiration of a 240 drift car anyone would want to build. keep up the good work bro looking forward to the next one!!
PLease for the love of this build have BIG security measures so this car does not get stolen... so much work has gone into this build.
+StepHop5 Has GPS tracking as well as multiple kill switches haha no worries.
nice haha, ill probs do the same when i get mine =D
it's a manual XD that's security right there!
+MyLonewolf25 but your average thief going for a drift spec cars probs knows how to drive manual + these days they just pull it onto a trailer... :(
StepHop5 ya got a point. But I doubt most car thieves care about that and go after the ones that looks the most flashy. Easy. And expensive/most parts
all that work you put into this car. It's just amazing and done so properly!
Never seen something like this. You are awesome :D
YES! LOVE THESE VIDS! I live in Japan and I love seeing all these sick cars but now with these vids I can actually learn about em :)
so glad your posting more often.
you still going to drift no matter if your friend are gone
9:05 ur face when welding feels so goddamn good!
ei saatana,suomalaisii
Joo suamessaki o interneetti.
Eiku suomalaisetki kattoo offbeattii ;)
Näköjään
you have the sickest car ever
Baller got 100's on the floor lol
Comgrats !!
you made like 4 Parts of Le Drift Cage Build
Aw yea
Love those random three $100 bills on the garage floor.
those #420 moments had me laughing like an idiot hahahaha
cant wait to see this thing shredding again
as far as i know this car was never on the track ... at least driven by him ...
+NotIrishRider well it was in the previous video w curbbangers as its pretty much done now just he adds little stuff more and more.if you follow,his snaps you understand what i mean.
300$ laying on the floor #240life
$400* lol
nice tidy work as always
The silver wheels look so much better than those black ones
Agreed. Looking awesome with the fronts tucked as well
Love your channel! Great vids and info 👍
10:32 money baby money baby money baby 😂😂😂😂
Were you planning on doing all the things you are doing to Le Drift Car II too Le Drift Car I if it wasnt all mangled
Big ballin
you should paint the roll cage ferrari red
we need moar powaaah! :)
Benjamin's! Baller
How are you welding around it? Dropping it to weld up top? Love your video style man!
Yep, front baseplates get removed and the cage can drop down and forward giving me room to weld all the way around the tops.
I have high (#420) expectation for le drift car
10:30 the Benji's on the ground!? lol
what engine this got? stock? do something on engine. keep it up
This build is looking awesome!! How long have you been building the cage now?
I didnt realise how much you was tucking that 17 on the front, was the talking portion recorded after the extended lower arms had been fitted?
Dude he's tucking hard on his snapchat, the cars looking so good.
i saw on SC but i didn't realise it was this much, on a 17 as well though
Are you able to weld all the way around? If so, how?
+Garrett Orfant Yes. Front base plates get removed allowing for the cage to be dropped down and forward giving room to weld around the top.
Offbeat is awesome!!!!!!! One of the top 240 sx drifting build channels!!!!!! One question do you plan to turbo the ka with the ISR turbo kit for more power for drifting??? its reliable not overly extreme for the ka
Are u gonna do any engine mods like turbo or stuff like that
Turbo yes
When u try n show off ur hundos at 10:30
yoh sap... are you going to paint the roll cage + the engine bay ???
coz it would be fu***ng awsam
how are you getting full welds all the way around the cross brace. I think you over thought the item in 4:50. If you're really worried about roll over then just build a funny car cage.
+Reyke Stab Front base plates get removed and the cage drops down and forward to give me room to weld around all the tubes.
did your jd2 already came with a die or you had to buy it separately?
You buy it separately. The bender doesn't come with a die.
what is the best dinosaur?
how you gonna paint the roll cage ?
did the LDC2 come with an sr20??
Nah, KA.
Ldc1 ka24de
+Ryan Olson oh okay. I thought I remembered him after one car that had an SR
+Jake Ward Nikita has a SR swap, as well as most of Southern California haha. Nikita used to have a RB though.
nice chanclas @2:00
Is he going to just keep a ka or a sr20 or something
he says the sr20 doesn't have low end torque and he's mentioned he likes the KA better
wanna come to connecticut and do the roll cage in my ae86
Are you going to add some more horsepower into that engine or nah?
Whats your plan for an engine after you learn on this one? You gonna go turbos or V8? Personally I would go V8 because its more reliable and less maintenance and less stress on the motor
+Mike Medeiros Going KA-T. Going V8 is the epitome of having no style.
hey brotha cars looking good man 😎. met ypu at formula d long beach. gonna be hosting events preety soon would be dope if you joined man.
Are u attempting to go into FD?
is this gonna be strictly drift? or are you gonna daily it?
I dont think you would want to daily a car with a welded cage and bare metal interior...
+Pablo Rodriguez I daily my 95 cobra that's a daily/drag car partial interior full cage
+nautilus9008 Its still an odd thing to do just saying.
this is awesome, why dont u paint them dark purple, since its ur favorite color ? lol
how did you find the funds to start this project?
+Jason Covarrubias By getting a job and saving money
+OffBeat Garage How much did you have to save to start?
+Jason Covarrubias Original car was $2700 and then add on whatever mods you want to that
+OffBeat Garage Thanks bro, that actually gives me hope on starting a drift car on my own, love your videos, keep them coming! 😆
Thanks man, glad I could help :)
flashing them bills at us? #cold
what's the name of front wheels?
+ShOnE aprilia Enkei Kojin
legit asf bro
are you building the motor too later on ?
10:35 what's with the $100 bills? lol
Why is there no more music when you weld or wire wheel something?
+UGL Fizzy Felt out of place a lot to me, added substantial time to the editing process, often had copyright issues with songs claimed as "copyright free".
ah I see
Dat #420 @1:51 😂
Offbeat - How were you able to fully weld these bars with the figment? There is no way you got a mig in between the roof and the bars. The video never addressed this either. I would be concerned if their isn't complete welds as it compromises your safety.
+ScottieDawg333 The front base plates get removed and the cage drops down and forward for me to fully weld around the cage. This isn't addressed yet because there will be an episode dedicated to welding the entire cage and this wasn't that episode haha. Thanks,
no more intro???
i know i miss the old garage door intro
+LXIX Films .....bring it back!
It was hilarious
dat end
im more worried about that precious $400+ lying on the floor there at 10:13
D3adly Cl0wnz I'm glad I wasn't the only one who noticed
What dud your parents say when they found out you where building a race car
+Laith Alnatour "Let me move the Porsche out of the garage so you can have a place to work on it"
Lucky fucker... Mine get bent outta shape when I do a brake job.
Never really understood that. As long as I'm on a solid path, living with good morals and attitude and putting my time towards something constructive then my parents will support it. And when I'm a parent I'll do the same with my children. Simple concept to letting your child follow their passion and be successful imo.
+OffBeat Garage must be nice ☹️
+OffBeat Garage just hold that thought... *passes phone to mom* ok go ahead.
is your car street legal?
+Zach Noriega Yes
Kool
you should turbo the car
He's gonna after he tunes the suspension and makes sure everything is working the way it's supposed to be, then he's gonna go for a JZ swap or turbo the KA I think.
Oh ok thx
He should turbo the KA
+Yvng Daren I agree! But that's all preference and honestly anything Adel does is going to be awesome.
tru
This series is KILLER. Amazingly high quality content. Too bad this stuff goes way over the heads of the lowest common denominator car enthusiast, otherwise you'd have the subscriber count you deserve. Keep it up, dude.
+weedshoes Thanks man :)
And yeah haha I know what you mean :P
Hey man be careful welding with the door closed with that plastic on it I would hate to see it catch on fire
Lol does anyone else automatically look away when someone welds on camera. :)
Hello
heeeeeeeeeeey
hi
It realy needs spacers, fittment not on point
+DR:Snaggens suuuure
+OffBeat Garage how did you do the paint on the 240?
Rattle can, flat black rustoleum
+OffBeat Garage thanks a lot bro! Will you ever be out at Irwindale drifting?
Yep I will be for sure. Just need to sort out all my suspension issues I'm having and then I'll be set.
lol hundreds on the floor
can i have that $400 laying on the floor ?
U should crash on purpose just to use the roll cage
not trying to hate, but thats a lot of dead tubes
#420
Firsts
yes, yes you are
yes, yes you are
yes, yes you are
He's spent more time building a drift car the he has actually learned how to drift properly. Learn how to do it well first, then build a car. Not the other way around
+DomesticGarage! Can't control everything in the world. Couldn't afford to keep the other car on the road and drifting. Original plan was to still drift the grey car while building this car so that way when this car was done I'd be good enough. But can't control everything so have to make do :)
#420
#420