Aleks Shibilev Опа , мислех че имаш BMW заради корицата ти в CT . Колата беше с Българска регистрация :P xD Аз почнах да следя Offbeat Garage от втория епизод , където се учеше още xD От тогава бая се е научил според мен :D
Just a correction on the X bar design, common way to do these over here are not actually crossing the bars but bend them so they meet in the center, and boxing the connection point.
idk if you still read these but you said u reply to comments if the have the reply button, sooooo. if you have to do a design like the x design, the piece that have to cut then continue, is it possible to make the diameter of that piece bigger then the piece you dont cut, and make it big enough so you could drill straight thru it, (instead of notching two diffarent pieces) then it would be still one piece then weld all the way around it. hopefully that makes sense but if not reply and ill try to explain it better...side note, im asking out of curiosity i dont have a car as of yet and have very little fab experience, but its just something i thought of, and i love the videos, im re-watching these because i find it fun, so keep it up!
Watch my video about welding the cage. The base plate is removed in the front and the cage gets to come forward and drop down allowing me to weld around all the joints.
Nope, everything needs to be welded. Refer to rules: static.formulad.com/myFiles/docs/rulebook/2015/2015-Formula-Drift-Pro-Technical-Rules-and-Regulations-US-Version-2.0.pdf
It could be more dangerous if he doesn't have a helmet on and has no foam on the cage. If he gets hit from the side and his head is thrown into a solid piece of steel tube without a helmet I think you can conclude what happens next.
Also, in general, I always disliked that argument. If you don't have a cage, you head will still hit sheet metal. It's metal too, so why is a solid piece of steel tube worse than a solid reinforced piece of 16 gauge steel?
i am a welder by trade stick, mig and tig. i used to go ott on all the prep bare metal and that but you be surpised that you can still get a solid weld on most metals as the heat burns off most crap. rust, paint and even grease
+i am Puga Yeahhh but straight pipe and stripped interior = me yelling just to talk to the person next to me haha so I'm still on the edge about adding speakers cause I feel like they won't be loud enough to hear.
SOO MUCH STUFF TO WATCH IN 1 DAY GODBLESSS
this build series is well done. I've rewatched it several times. nice work dude!
That purple is clean AF!
I need some popcorn. 4 episodes ? You're a star :D
Теб те помня още от CarThrottle :D
Aleks Shibilev И аз теб xD . Ти имаше e36 , нали ?
Е харесват ли ти новите епизоди на OffBeat ?
John West Не, на 15 съм?! :Д
Адел винаги ми е харесвал.. Гледам го още от като взе това купе :Д
Aleks Shibilev Опа , мислех че имаш BMW заради корицата ти в CT . Колата беше с Българска регистрация :P xD
Аз почнах да следя Offbeat Garage от втория епизод , където се учеше още xD
От тогава бая се е научил според мен :D
Корицата ми е със субару още от началото и нямам нито един пост с бмв, ама нищо :D
FOUR EPISODES AT ONCE??? LOVE YOU ADEL
Need to make up for my month of nothing
OffBeat Garage your fine dude, don't stress we love you
OH AND FIRST
now imma watch them all in order in one sitting
HES ALIVE! WOO
Popcorn ready!
dayum 4 episodes ... gotta restrain myself or i get an overdose :D
Just a correction on the X bar design, common way to do these over here are not actually crossing the bars but bend them so they meet in the center, and boxing the connection point.
yes! episodes!
Ur interior is so nice
can't wait for the ebisu footage
Have you thought of maybe wrapping the dash in suede to cover the cracks? I've seen a couple dashes destroyed turn out beautiful with suede
+Moises Mora Yeah going to be wrapped. Haven't had the time. Need to edit videos and not build the car.
THE VIDEO DUMP IS HERE, ALL THE OFF BEAT SWAG
F*CKING FINNALY, VIDEOS!!!
Holy shit man! I love your vids.
your damn good at fabricating
You're*
thanks dood you saved the day
OMG YES YES YES
*1:56**am* Well, time for bed 😴 *Sees 4 new vids* Sleep can wait
What bender are you using brand model? Where did you get it? Thanks in advance!
can u do a video for 2020 FD spec cage builds
idk if you still read these but you said u reply to comments if the have the reply button, sooooo. if you have to do a design like the x design, the piece that have to cut then continue, is it possible to make the diameter of that piece bigger then the piece you dont cut, and make it big enough so you could drill straight thru it, (instead of notching two diffarent pieces) then it would be still one piece then weld all the way around it. hopefully that makes sense but if not reply and ill try to explain it better...side note, im asking out of curiosity i dont have a car as of yet and have very little fab experience, but its just something i thought of, and i love the videos, im re-watching these because i find it fun, so keep it up!
How did you get the 360 weld around the horizontal sill bar where it joins the main hoop? It looks really tight against the side of the chassis
Watch my video about welding the cage. The base plate is removed in the front and the cage gets to come forward and drop down allowing me to weld around all the joints.
finally
Bro when the 1j going in??
I like your car
When will you be in formula drift
How much tubing do I need for entire roll cage?
are you going to flock the fash
Can you have removable door bars & still pass FD regulations? I'd look online for half an hour but I'm sure you already know. Thanks!
Nope, everything needs to be welded. Refer to rules: static.formulad.com/myFiles/docs/rulebook/2015/2015-Formula-Drift-Pro-Technical-Rules-and-Regulations-US-Version-2.0.pdf
Thanks :)
damn you look good!
without glasses I mean
four videos!!!!!
do you take some sort of special class to learn to weld or just from the good ol Internet? Your build inspired me to do my on project car.
Good ol internet haha. Just buy a welder, watch a few videos on what to look out for and then go to town practicing! Thanks :)
***** Thanks for the reply
its about time..... i thought you died lol
IS THIS REAL LIFE? DID WE REALLY JUST GET VIDEO SPAMMED?!
HELL YES!
If you got into a accident around 20-60 mph in public traffic with this setup would it help you more or be more dangerous
im assuming help, thats why in competition its a requirement
GhosTizM in drifting you average 40-50mph and roll cages have saved lives in events so it would help
It could be more dangerous if he doesn't have a helmet on and has no foam on the cage. If he gets hit from the side and his head is thrown into a solid piece of steel tube without a helmet I think you can conclude what happens next.
He has a SFI approved padding. Also, his cage is tucked up so high, that with the harness on it's impossible for his head to hit any tubes.
Also, in general, I always disliked that argument. If you don't have a cage, you head will still hit sheet metal. It's metal too, so why is a solid piece of steel tube worse than a solid reinforced piece of 16 gauge steel?
will you swap or go turbo and if swap what engine
1jz
I***** is he going turbo ka or 1jz
I had no idea a cage was so much work until you started this series. Note to self: never build a race car.
How much did you pay for all the tubing
+arturo cadena $2.75 a foot on average. Cage took about 100 feet including messing up some pieces. $275 in tubing
what kind of shift knob is that ?
Adel made it. Get one at www.offbeatgarage.com
+Nikita Rushmanov lol, such a good friend promoting his products😂😂
Haha thank you Nikita
5:13 dwrivwer
how much did it took to build this cage ?
how much time*
+Friendly Like a thousand hours I believe.
dang yo put some work in my man !
Oh yes haha
Will you make an episode of you painting the cage cuz i Kinda want to see how you did so I can have some ideas how to paint my lexus
Surprised he has not gotten a hydrolic ebrake
No need. Most cars in japan too don't run hydros. Just a good cable and nice brake pads for the ebrake and you're golden.
OffBeat Garage who cares the rest of the car looks dope af especially that purple
is your car street legal?
+DelaRue Yes
OffBeat Garage sorry i know this is an old post but what car insurance do you have??? And do they think its still stock?
please do not take this the wrong way but you go a bit ott on the prep.
I'll take that as a compliment lol
i am a welder by trade stick, mig and tig. i used to go ott on all the prep bare metal and that but you be surpised that you can still get a solid weld on most metals as the heat burns off most crap. rust, paint and even grease
Oh I know. It's just one of those things where it's like if you have the time, and it's something like a roll cage. It won't hurt haha
Breh
I'd say go with speaker so you can bumb dope ass music wile you wait for your turn for a rum or off track bump nope ass music err where
+i am Puga Yeahhh but straight pipe and stripped interior = me yelling just to talk to the person next to me haha so I'm still on the edge about adding speakers cause I feel like they won't be loud enough to hear.
***** yea but Eminem
XD
adel, the dashboard is so ugly 😩