Very informative, I'm going to be getting a 3D printer from a friend this weekend and will have to work on making the part you designed. Thanks for taking the time to make the video for everyone.
Hello I have a question.My Jumper t-lite has very quiet sound from speaker.I must put my ear to it then I hear something.In settings everything is on max.Please help...
I can only think that it would be a hardware issue and needs replacing. Try contacting the supplier, they might be able to send you a replacement speaker for a small fee (if you recently purchased from online marketplace such as AliExpress)
The radio control firmware is EdgeTX, which came from OpenTX. You can press the buttons on the T-Lite (and may other controllers that support these firmwares) to show various details and options. It's quite customisable. As you mentioned, I've set up mine to play sounds when I flick the switches. It helps me audibly confirm I flicked the switch I intended while wearing my goggles and flying. There's quite a few tutorials on UA-cam showing how to do this. Here's one: ua-cam.com/video/bH1plVPCAeo/v-deo.htmlsi=LIeFOFbtzDgrPRbO
If you haven't yet, try doing the gimbal calibration in the OpenTX menu. If it still doesn't center properly, then it might be an issue with wiring/soldering. If wiring is not the issue, I can only guess that the gimbal is faulty. Perhaps reach out to your supplier, they might be able to help with getting replacement parts. Good luck!
I hope you got this worked out. I had problems with mine too. I ended up opening the case and cleaning the hall sensors on the gimbals with isopropyl alcohol and compressed air, and then didn't have any more problems.
Mate, great point!! Thank you!! I didn't think about that 🤔 I'll have to replace that piece with a transparent filament next time I've got the controller open. Hopefully not too soon though, it works well at the moment. Cheers! 👍
![☀ Аппа с ELRS для НОВИЧКОВ! А заменит ли она TBS TANGO? [Betafpv LiteRadio 3 ELRS]](http://i.ytimg.com/vi/JUWJps5ToCY/mqdefault.jpg)
Very informative, I'm going to be getting a 3D printer from a friend this weekend and will have to work on making the part you designed. Thanks for taking the time to make the video for everyone.
I just added the link to the STL in the video description.
@@nxp200I played a similar without my antenna on, on accident will that mess it up
My jumper t-pro is doing the same Thing with the sticks. I’m gonna open it up tonight to see what’s up. 👍 thank you for your video
Good job fault finding. The thin wires are commented on in quite a few reviews.
hey, can the aion 2.4tx for jumper t lite work with v1 without the distribution power board that came with the slim tx?
Hello I have a question.My Jumper t-lite has very quiet sound from speaker.I must put my ear to it then I hear something.In settings everything is on max.Please help...
I can only think that it would be a hardware issue and needs replacing. Try contacting the supplier, they might be able to send you a replacement speaker for a small fee (if you recently purchased from online marketplace such as AliExpress)
Hi, how do you get your display like that? Mine just shows model name and battery level, also does yours speak to you etc as mine doesn’t.
The radio control firmware is EdgeTX, which came from OpenTX. You can press the buttons on the T-Lite (and may other controllers that support these firmwares) to show various details and options. It's quite customisable. As you mentioned, I've set up mine to play sounds when I flick the switches. It helps me audibly confirm I flicked the switch I intended while wearing my goggles and flying. There's quite a few tutorials on UA-cam showing how to do this. Here's one: ua-cam.com/video/bH1plVPCAeo/v-deo.htmlsi=LIeFOFbtzDgrPRbO
@@nxp200 yeah i’ve done the voice stuff but not sure how to get that display with the sticks
Nice job. 👍
I have a question. On my Jumper T pro the roll axis gimbal don't center correctly. Could it be the solder or something else?
If you haven't yet, try doing the gimbal calibration in the OpenTX menu. If it still doesn't center properly, then it might be an issue with wiring/soldering. If wiring is not the issue, I can only guess that the gimbal is faulty. Perhaps reach out to your supplier, they might be able to help with getting replacement parts. Good luck!
@@nxp200 Thx for your answer
I hope you got this worked out. I had problems with mine too. I ended up opening the case and cleaning the hall sensors on the gimbals with isopropyl alcohol and compressed air, and then didn't have any more problems.
Oh cool! Nice to know if it ever happens to mine, I'll definitely be trying this. Cheers!
@@0bucklin There were a lot of metal shavings inside and it didn't work despite cleaning and re-soldering.
Maybe it's a faulty gimbal.
i think the pice of pla that hold in place the hook for the neck strap is blocking the light to shine through.
Mate, great point!! Thank you!! I didn't think about that 🤔 I'll have to replace that piece with a transparent filament next time I've got the controller open. Hopefully not too soon though, it works well at the moment. Cheers! 👍
My Screen light was nit working till I see a watch battery inside the remote control
my screen also had the same problem
your getting stick issue is because your trims arent centered
amater job 😳