HOW TO TEAR OFF SHEATHING + SHINGLES
Вставка
- Опубліковано 14 жов 2024
- This video is showing ONE of MANY ways to tear off a roof with the sheathing. Be sure to like and subscribe in order to help me bring you more helpful videos filled with tips and tricks I've learned over the years. Plenty more videos to come!!! HIT THE BELL
#WorldsFastestShingler #Roofing #Carpentry
Ok everybody is paying way too much attention to the shit that ain't your business lol Nobodys bank account was harmed in the making of this video. The osb?That was an addition. The rest of the house was not very good my fault for not showing more of that. I was not the determining factor on this resheet. Here's what happened. The house was being sold. The inspector said the roof needs redone and there's an issue with potential mold on the underside of the decking in numerous spots. The call I got was to replace all decking and shingles. All I got was an email with a picture of the moldy undersides and was told they already have a bid for a whole resheet and to bid on that. They already had it worked out. Between the buyer and seller they had a deal with payment and how much negotiation room there was. I was not part of any of this. I questioned it at first but the roof was spongy everywhere I walked so I gave them my quote and they chose to go with me. This video Is simply to show you guys an efficient way to perform this task. This video is not for the justice warriors, its for the performers. Thank you for watching! If you learned something feel free to hit the like button and subscribe. We're going to have a crazy year in 2020!
OSB seems to be the way to go over in america..... not seen many videos where they use ply. i dont blame em, its cheaper than ply.
@@sttm1283 it is what is used on every new construction job I see and I've torn off many roofs with osb. tear offs are awesome on osb
Old and no gloves. Awesome...
This is fucking hilarious. What a joke.
The fire fighters were falling through the osp because they burn hot and quick.
Thanks for the awesome tips. My crew left me in bind and I got to do it myself. These tips will save me great time and effort! Thanks for helping an old retired fireman!
I have done this method of sheeting removal when I was in roofing industry...I heard you yell about the gutters getting hit and what we would do is turn a sheet over shingle side down and hammer over nails then over hang it a little past gutters to protect them...worked really well
I'm not a full time roofer, but I learned last year a good time to do ventilation is with a deck tear off. Add new bird blocks and correct any baffling with roof vents. More air in more air out. :)
First few minutes of the video where you explain the integrity of shingles decreasing due to improper ventilation is something I would love to see more of. Things to take note of about the construction of the roofs and things that can affect your job laying shingles in ways like the venting aging it quicker.
I got a feeling this roofer walked on that roof and started springing because of the 24-inch centers and thought the plywood was shot that plywood looked fine to me
Wrong. Read other comments. The last thing I want to do is a resheet. I'm not hurting for work I'm as straight forward as they come
@@NWIVeteranConstruction you know as I was writing that I'm saying what do I really know from so far away and threw a camera I really couldn't tell how bad that wood was but I'm glad to see that you are an honest man and sorry for jumping to conclusions
@@NWIVeteranConstruction a lot of time when an attic is suffering from lack of ventilation it dry rots the plywood and you can't tell by just looking at it
It’s 12 am. I’m laying in bed. I have no idea what I’m watching or why I am. But it’s delightful. And it’s putting me to sleep. I like it.
Might suggest to you screwing a temporary small sheet to stand on when you work your way down tearing off plywood. Had a a guy go through a drywall ceiling. Wish I had taken the extra few minutes.
We had similar incident with a guy falling through the ceiling on an A-frame.
Plus some Mexicans to finish the job fast with extra profit
Had a guy fall threw the plywood and the drywall. Just his legs went threw though. Lucky it was the ceiling in a closet so easy fix.
Thanks! This technique is exactly what I was looking for . I was going to just run a circular or sawsall down the rafters to cut it out in sections. We are converting the roof of our shed to translucent corrugated roof for light. Was trying to figure out how to get the old shingled roof off without killing myself. Thanks
I watch you a lot and i like the work you do... with that being said, i roofed for 22+ years and that was a very unnecessary amount of time wasted cutting holes in your ice shield for those pipes. Lay it over them, cut an inside X, slide it down and cut off the excess. 30 seconds vs the 5 minutes of hammering it. Thats all i have for critiquing this video. Keep up the good work!
I’ve been using the ice and water trick for vent pipes & things for years. If you want and easy way to get the sticker stain of use 4D-40. love doing tear offs like that I see you have not broken the newborns in on from doing pivots off the toe or ball of their feet tearing up new shingles. Love the channel keep up the awesome quality.
The way you cut ice shield around the pipes turns out good but you can save alot of time laying it on like you did than cut around the inside diameter and pull it down. Even stretches it a bit and seals great
Hey @Worlds Fastest Shingler.
There's alot of haters in these comments but I'm a guy that has actually been roofing with my Dad who owns his own roofing company for years and you and those boys do good. They aren't the fastest or best but they aren't all professional roofers either. BUT you keep em whipped into shape. Keep up the good work.
I like the 2 tricks you had in this one. Been watching your videos a lot lately. Good content and good lessons. Keep up the good work man
Thanks bud I'm happy to share with you guys. Just here to help and entertain
Your the reason your business in growing both on youtube and real life bro. You can never leave the job and trust anyone. Can’t wait to see what’s next👍 fire someone off the roof!! 😂
thanks bud!
I'm not a roofer or have ever done a roof. But I find your videos satisfying to watch.
I worked for someone on drugs. Worst time of my life
Nice work and quick. Tell me pls who's ice n water do you like? Thx
You should just screw a piece of 2x 8 foot piece plywood over the edge of the roof to protect the gutter. Gives the guys a little edge to get their foot against when throwing over as well.
Dave Brittain nope that’s a waste of time
@@handymaninside I can see dings in the gutter from you guys already. Putting in 6 screws would take too much time? Far less time then what they guys are taking to avoid damaging it now and to repair it. Don't be silly!
Dave Brittain if you know so much 🤓, go out there and make it happen, and find out in person that your backseat driving is a joke...
Or prove us all wrong and add the boards to your estimates and spend the time cutting them down with a saw that most subordinates aren’t trained to use proficiently... I’m sure your client will appreciate the extra costs, when all you had to do is tell the crew to be careful asf prior to going up and doing the work.
🤓 we might work by the sweat of our brow, but at least one person has to know shit to make things happen. I know all the shit in building homes, and all the codes... which is more than one could even expect from these trade specific contractors.
@@handymaninside I have been a contractor doing renovations and new builds for almost 30 years. I know the codes too. If buying and cutting a sheet of ply into a piece 2'x8' of ply is going to break the bank then maybe you are in the wrong business. I wonder how stupid are the people you hire? All my guys can use any saws that I have. What cost is a piece of ply instead of replacing a length of trough? I know MY client would never have a dinged up trough when I was done the job. If it was your house would you be happy seeing a damaged trough when they were done your roof?
@@handymaninside By the way I am only referring to the spot where the bin is where they are carrying and dumping the sheets.
On your pipes another great fast trick lay it on top like you did but cut a small circle out then x cut the edges and slide it down. Then you have a small collar you press against the pipe and the boot covers it. Your tore that roof off like a boss. Great technique. You’re a fantastic roofer and very cool boss. Great videos.
Only one smart person with gloves on!
No bitch mittens for me kiddo
I slapped that like button so hard and so fast my phone didn't know what hit it!
You're a good guy with heart and drive. You can teach just about anything to your help, except that. Now with all that said, you actually put OSB back down again???
That trick with lightly tapping the pipe with the felt paper is legit! I'm going to be replacing my roof early June. Thanks for the advice!!
I don't know why I like these types of videos so much being in a wheelchair and not able to work in it.
Well I'm glad you enjoy bud! Always interesting seeing something come together I guess
I just watch too.
And I like him. And he makes me laugh.
And he is interesting.
And handsome.
I'm choosing him for my daughter. Too young for me.
Haters aren't very nice on here.
I just need to fix some problems with my roof. I truly enjoy learning what I can so i don't get a bad roof again and how to prevent my roof from over heating. My roof looks a lot like this one. I too thought it was fine! It wasn't. It Isn't.
And it's aprox. Same age as this one as well.
Keep up the good work!
I'm re-roofing 40 sq due to tornado 🌪 damage. Everyone in my town is price gouging because its "insurance money". The cheapest bid I received was $450 a square.
So im doing it myself. This includes replacing ALL the wood. The tips you showed me are invaluable!
I'm starting this Friday (06/30/2023) as soon as the dumpster shows up!
best of luck to you! be veryyy careful and have more help than you think and plan for it taking about twice as long as you think lol
@NWIVeteranConstruction I'm just north of Toledo, OH. If you want to shoot a video and help 🤷♂️🤣
Smoked brisket, ribeyes, and professional fireworks on Monday (I have a Type 54 license for fireworks).
@cw6136 haha I'm swamped right now thanks though
In my area it's 1500 a square! Also doing it myself.
A tip from a HVAC Tech here, that B Vent (Double wall flue pipe) needs 1" clearance to any combustible materials. Us heating guys will love ya for it.
I just came here to make that comment. I always have to cut back shingles from below in the attic to get clearances when I inspect an older install.
busunmate i was going to say same thing. nice catch , was also a BM myself
@@NoName-zu9nl Weird how we went from BM to here. Which branch were you in?
I'm not one to knock on other contractors work... I just show up and start working/fixing. BUT theres times when you gotta sit back and admire their lack of craftsmanship.
Saul Moreno especially when they get it on video lmao
This' worlds fastest 'is making solid roofers look like idiots. Its terrible.
That's a great way to tear shearing off...but your not reinventing the wheel...of all the trades..the roofers are the braggingest of all..most roofers are insecure..lots of druggies and alcoholics who lost their drivers license and live in their mothers basement...but roofing is tough work..and not everyone can or want to do it...not all roofers are bad ......are you that world's fastest roofer???
Thanks for your post, and being passionate about your trade. Good to see someone who enjoys what hes does for a living.
No wonder there was mould, every second rafter space was blocked with insulation, blocking air flow from the soffits. It was a good opportunity to fix it. But just sheet over it again.
mark kouba didnt fix the issue at all
I noticed that as well. They are roofers, not builders.
You only need 1 sq ft of venting per 350 sq ft of attic space. Wich is to be divided between intake and outake. Not ever soffit bay needs to be vented. Besides that it would be the insulators job to fix that if they wish, not the roofers
Insulators Job? No one is there but them. If you see shit thats wrong fix it. Tell the owner first. Get paid for the work but make it right. You will stand out more in the owners mind. You will get a better recommendation word of mouth can build a killer business or destroy one thats been established for 30 years.
Yeah insulators job because if you didnt notice they dont have sheetrock on some of their cieling. Lol. It's an obvious insurance job. So yes once the roof is re roofed and inside fixed. The insulator can fix the proper vents more properly than the roofer can from above
Usually on those vent pipes you would want to use roof flashing
That addition on that home is scary Craftsmanship from the previous builders with those roof trusts. Good job on replacing the roof..👍🏽👍🏽
yea idk why they went to a ridge rather than the truss they make for the valleys like that lol
Fastest way to send up sheets is using a Ladder-vator. Keeps it from dragging across the fascia as well.
Great work, this was nice to watch. Also very informative on why you want to use ring shank nails in roofing!
At the end of the day your name is the one on the contract, you'll be the one they call if they get a leak.. . Its the rare employee that cares as much about your business as you do.... Your business is only as good as your worst employee. I'm glad that you take the time to teach your guys how to roof... now if you could only get them to follow your work ethic.
They're getting there. That's why I train the young ones rather than deal with the experienced ones. In due time I'll have a killer crew
I know we’re all Professionals here in the comments action but I learned some thing and I appreciate the video now I can actually do my roof myself.
I did not see a single Plywood sheet that needed to be pulled. And they all looked factory fresh seeing the bottom as they were pulled. Mayhap they need better nailing, but it didn’t seem they needed to be removed/replaced.
Hi What thickness plywood sheathing is ideal? I am located in southern Ontario (Toronto) and we do get fair amount of snow. 3/4 inch plywood be overkill? Thanks
BOYCUB 😂 I will have to remember that one for my son !! Sweet tips on full sheet removals 👍
Hey can this technique be used with removing new shingles and plywood from the roof . It's only 1 year old i decided not to keen the house and rebuild the entire house including the roof??
I would like to see what you would have done had it started raining. Not much you could do with the sheeting off
He would have had his insurance company pay for the huge damages. This guy takes huge, stupid risks.
Tarp it
put a tarp on, dont be pussies
You don't tear off a roof when there's a chance of rain..... 🤷🤦
Did the truss installation meet the code? Trusses are prone to domino during construction unless they are braced longitudinally.
That roof woulda lasted 25 more years in my town.
Lol the haters, hating on what was already said as "the new guys", new guys always wanna be "on the site", standing around bullshiting with the boys, that's the stereotype that these new kats always wanna portray. It gets old, the novelty is dead. The video was about the method, not the speed or integrity of the workers, I'm loving the method. forever, roofers have been missing the common sense, which was displayed here by the method... dope video, I'm going to remember it.
Word
Calling OSB plywood is a cardinal sin
Young mans work for sure.
I'm curious to know why you told all the plywood off if it looked fine?
I used to do Metal roofing but I don't anymore and yet I find your videos very entertaining, I always watch them while I'm eating Haha
haha as long as you're watching and always remember to hit that like button idc where you watch them bud! binge eat, binge watch
You can become a great boss when you're able to achieve the art of appreciation of others.
Man I was about to say the same thing I'm a contractor in California and I would never talk to my guys that way
I’m so glad you noticed this! I watched his first video and instantly knew he was a self promoting douchebag. He treats his guys like shit while thinking he’s some kind of GOD. He’s a half ass roofer at best and a douche to work for. I never had to say these guys worked for me I always let them know even though I own the business that we work together for other people.
Who uses beaver puke to sheath a roof? Not on the north east coast!
I believe they are all military, so you can skip all the rainbows and butterflies and just get the job done.
@@bignato08 Well you are from California where it never snows but snowflakes are everywhere.
Beat ya to it....been doing this for a while also a good Technique for other types of tear off if you have old Delta rib metal like I just had on this pole barn on Perlins you can take a 4 x 4 long ways preferably a 4 x 4 as long as the roof is and you can go right down it and pop all the nails if it’s been nailed down with ring shank washers nails just got to start with a pry bar for the first edge then go to down I was popping off 28 foot 36in panels with a 8 foot 2x4 at about 1 min a panel and the old panel could be reused as it caused no damage to the panels ( people love that rustic metal look lol)
OSB on 2ft centers?
How bouncy was it? xD
Would've gone Ply, personally. Budget a concern?
I hate houses with rafters that are 2ft. apart with a passion... makes me furious
5/8" CDX or 11/16" tongue and groove OSB
Here in northeast stick built ,16 centers, trusses 24 but 5/8 zip panels
Osb is stiffer on 24s..
@@doddgarger6806 LOL.
Hey Zach!
I’m new to your channel and I want you to know I appreciate all your videos. Good stuff! I’m in Colorado and trying to branch out on my own so I appreciate a lot of what you are doing and showing.
Thanks again!
Np my pleasure!
I cant believe how easy that shit came up. Nice trick.
Hey man love your videos. This is my 3rd year running a roofing crew, mostly metal roofs. How do you pay these guys that come and go? Just cash or 1099?
Matthew Stevens always cash unless it’s someone permanently working for you ... I pay my workers cash some get paid with checks
This is Rick James with the IRS.... we have traced your account.. haha jk man I would do the same thing!
I’m a framer and they did that sheeting like shit. And OSB is just cheap. Zip ply system for the win
Really zip is just OSB
zorroon milkavitch yup with a water proof coating applied to it. And it doesn’t work as designed unless you follow the manufacturers guidelines. Tape every seen liquid flash every nail hole.
Chris Lake osb ftw , it will soak up any moisture and allow for easy repairs
That 2x4 trick is gold, it would be nice if you had more people that knows what they are doing looks like you are the only one that knows what to do
Yea n also a few of them would rather try to take credit and say that's how they would've done it if I wasn't around. Rolls eyes heavily. I'm working on it tho. For some reason the 2 that are older than me just can't give it up that I really really know my job well
@@NWIVeteranConstruction you do great work that job is tough specially hot and humid days ufff
Worlds Fastest Shingler
I am a general contractor out in California, I am 36 but look like I am 25 :) haha I have always had problems with guys that are older than me, they really have a hard time grasping the idea that I am younger but been in the trades since I was 15. I try to understand there point of view, but if you are going to try and battle me every step of the way, and you know so much more than me. Then go start your own company. To be honest, from my personal experience. Employees are the hardest but most interesting side of any business. Best of luck out there!
You have an incredible work ethic, hopefully your crew will be inspired!
Thanks Dan I appreciate that! Hopefully they do too lol
Like the method with the 2 x 4. I made a custom tool by welding a bar across the back of a tear off shovel.
sounds pretty damn cool! lol
How those tennis shoes feel when you step on a nail?
You only learn that lesson once
I've got them in every foot wearing boots or tennis shoes lol but I'm much more careful now
@@NWIVeteranConstruction have you tried xtratufs? That's what I wear for roofing. I've stepped on nails, screws, even razor blades and nothing has gotten all the way through yet. Plus they have amazing grip.
@@hunterwolfe9059 no sir I have not! Are they comfortable?
@@NWIVeteranConstruction they're actually not bad for rubber boots. I wear then every day and have no complaints
Cant beat that awesome figuring that out!!
What's with the four inch wide strip of OSB at the ridge? That's a big No-No.
First place the sags will be visible from ground lol
Good work bro,,I just started watching your channel..how long you been roofing man...ive been working 4 my pops roofing company here n va about 17 yrs now.
Leverage baby I'm a framer but that trick is gold
Everyone in mass Cape cod northeast style remodeling framing roofing construction knows that trick using the 2by to pop those sheets sometimes it's way to steep to just stand there like that though good for shallow pitches for sure good job 👍👍👍👍definitely
Yes hello I’m an OSHA inspector and I would like to come visit your current site. Please contact me at your earliest convenience for a free safety inspection. 🤣
First of all, your videos are great. Thank you for taking the time to make and share them. I'm curious what the plan was if it did start raining? Tarps? Also, what is that white corrugated stuff?
The corrugated foam, called rafter vents, is there to hold the insulation down off of the roof deck to ensure ventilation is open from the soffit vent on up. Block the airflow, and there may as well not be any vents. My opinion is that particular product won't allow adequate airflow. I like to have them in every space as well.
So I counted 17 shinners while laying down that sheathing.
You'll be doing that roof again 5 winters from then.
Im just learning. What is a shinner?
@@renegadezen7841
Walls and roofs are covered in 4x8, (4 feet by 8 feet) sheets of 3/8 inch thick plywood, each sheet is tightly nailed into wall studs and ceiling truss, each sheet shares a stud or truss with about 3/4 of an inch of room to nail so it's a tight nailing pattern.
Anyways, when you miss you'll see daylight and most guys will call "shinner"
A trained ear can really hear the nail missing the stud, if you're an apprentice and they have you nailing walls and roofs which is young guy work you almost have to depend on the framers to really do well building the walls, same with the truss setters, they have to depend on the framers, sometimes you'll only have a 1/4 inch to nail in.
If you're just learning I wouldnt get into any trades unless you really love doing it, carpentry is fun but it;s different levels, rough housing isnt fun either is concrete forms, you really got to learn the formulas and tricks early on and most guys in construction are assholes with addictions, they got to drink every night and smoke several times per/day and they dont like you not knowing anything because youre not making their day any easier.
@@delljr2769 thanks for the explanation! When I say learning i mean learning about roofing in general because i am about to be buying a whole new roof for a rental property i just bought where the roof is trash. Now i am going down the roofing youtube rabbit hole.
@@renegadezen7841 A shiner is when a roofing nail shows after you set the next shingle above it. It's a guaranteed roof leak. They're bright galvanized nails, and the nail head shines in sunlight. I've NEVER heard of a missed nail in decking or sheathing called a shiner, and definitely never heard of it causing a problem. There are different thicnkesses and types of decking too - it's not all 3/8 ply - matter of fact, I doubt there are any 3/8 ply roofing applications anymore - wider roof framing spacing = thicker ply. Thinnest you really see anymore is 7/16.
The talk about most construction guys being assholes with addictions ... yeah, there's a lot of that. A WHOLE lot of that.Then there are immigrant crews - and while they don't work for 10c / hour like some guys would have you believe - they work VERY hard in brutal conditions.
I 100% agree with the part about construction being full of huge gigantic assholes with addictions and inflated egos that'll never let you get ahead because somehow they feel like you're going to take "their work" as if theres not enough to go around. Those guys are a big part of why I don't work in construction anymore.
@@notsure7874 exactly what I was thinking,LOL he even spelled it shinner so I was wondering how missing a couple nails on the sheathing would cause it to leak.
this video helps. I am helping a friend do this in 3 days...wish us luck!
I believe that around the Heater pipe there is supposed to be at least 1 inch clearance to material that can catch flame such as plywood and Ice and water shield. So putting it tight to the pipe puts you in danger of fire.hazzard.
2" plus he put the very flammable ice and water right next to it and spoke about caulking it in a well.....he has no clue.
I'm not a roofer so pardon my ignorance on this. If you left a gap around the pipe wouldn't it allow water to get in? Or is that what you would use a metal boot on?
@@johnnysouza5601 The gap is to keep the wood from catching fire from a fire within the flu. The flashing around the pipe is laced in with the shingles and has a collar that needs to be caulked in order for rainwater to not run down the pipe and wet somewhere in the house. The flashing is cone shaped and comes up from the roof face to tight around the pipe. But usualy there is even a gap there a little bit. The rain collar is attached usually 1/2 to 1" inch above the bottom flashing to make the final rain seal.. This allows the pipe to expand up and down as it changes length from hot to cold temperature and still not have a leak. The collar or pipe skirt moves up and down with the pipe While the roof flashing stays on the roof keeping water from the roof from entering the gap around the pipe. Some places require 2" gap to combustibles from any flu pipe that could have a fire in it.
That’s genius how you took off that roof.
Pretty cool.
Smarter. Not harder.
That method could force the scissor part of the truss into the ceiling causing nail pops through out the ceiling
@all the negative comments. If you bid a job the right way, your guys can work like gentlemen without having to support a 20lb tool belt all day. They did a nice job and while you might not agree with the tactics (everyone knows a better tip or trick right....) it is erroneous. Power to you man, great job and love the vids. The haters can fuck off and try and troll/ruin someone elses day. I see this guy making money so hes doing something right!!!!!
For the amount of guys it could be faster but i can tell there is only one fully functional guy there so re sheathing by 1 is okay.
Love the trick for putting Ice around the pipe stacks. Can’t wait to try it on my next roof!
Dude, you should be re sheeting as you go so you don't have to reach and walk the rafters. Isn't that obvious?
No sir coz once you get one sheet on its smooth sailing from there and I stood on the rafter when I tore off but my guys were standing in the attic on the plywood across the ceiling joyce
Gerard Guitarist how the hell would he get the 2x4 under the next sheet if he did that? Stupid idea
Joist*
Next time you’re flashing a pipe with ice and water leave the plastic on the back cut it fit it after it’s cut pull your plastic off and put it in place a whole lot easier than trying to cut it and fit it while it’s trying to stick to everything
Great idea but I’d be a whole lot faster to put the ice on top of the pipe and cut it with a knife but cut around the inside diameter of the pipe and a slide over the top perfectly just like you did but faster and you’re not hammering a pipe that might be loose and he could possibly damage the inside plumbing
Do you think two people using this method on a 2/12 single layer roof could remove 6 square worth of it in half of a day leaving enough time to re-deck it that day? I’ve shingled before, but haven’t re-decked so we are trying to decide if it’s a doable 4 day job. It’s a small 1290 sqft roof and it’s all cathedral ceiling in desperate need of insulation which is why we are tearing off the decking. We hope do one side to completion in 2 days then complete the other side in the remaining 2 days. Thanks!
Idk if I'd do it this way on a vaulted ceiling... probably have a few drywall nail pops. I'm not sure though. I'd grab an extra guy to be safe and definitely watch a few videos. It's simple though, I don't see why not. Should be able to get off/ sheeted and dried in in a day
Would like to see a comparison to traditional method, seems a lot more risky moving sheets that heavy around on a roof then stripping firsf
Doesn't look all that bad, they've got 2 guys on it - it's about 120lb, and it's WAY cleaner.
gloves, a 30 inch reach hook, a shingle/vinyl knife, stand offs for the ladder, safety lines, lay down temporarily 1 row of sheeting, to stabilize the rafters and to stand on
Should nail a scrap piece off wood to the roof to protect the gutter so they don't smash it when they throw off
great idea! I guess I just expected them to be careful rather than trying to think of something. that's a great suggestion. I will take that one with me!
Nah just nail the kid with the black ponytail to the roof instead
Great video dude. Dig your content. Watching the way you work I think I’d fit in
Thanks. We used to have a blast
that board looked plenty good
As a 23 year old that started roofing/framing at 14 with family friends.
It’s because of men like this, I am where I am at today. An independent contractor who grew up being taught how to work smarter not harder with no lack of busting ass. The best leaders are the quiet ones who aren’t so damn insecure that they have to let the whole neighborhood know who’s boss.
I don’t care how you lead. All I seen was about 16 square of roof go from shitty shingles to new sheeting in about 3.5 hours. Home owners were probably very surprised at the amount of time this job was done.
With small companies like this, the homeowners are the boss. The business owners are there to help and provide value to the customers. One bad job can squash all potential leads in the area.
I’m very blessed to have a dad like this guy
If you show up everyday that’s all that counts
Now who will get in the attic to finish installing baffles, since you didn’t while the roof was off... good way to guarantee yourself a re sheath next year i guess
ONE baffle got a little dinged up lol and I adjusted them back to where they work just fine. Exactly the same as before. Thanks though
@@NWIVeteranConstruction Exactly the same as before? There was poor ventilation before.
baffles aren't required in every cavity.
I like metal roofs better than shingles. You all do an amazing job.
"nobdoy has ever complained" is kind of a terrible excuse to keep doing a poorer job of something
Joe Phillips Hear it all the time around here to excuse bad customer service in local stores. It's just the person being lazy and not wanting to do any work.
he paints them anyway, so what's the issue?
Heard that from lots of guys I have hired.. you don't get callbacks because you dont work at the same place for 12 years...
Also reminds me of my dad to the game wardon one year, "but we've been hunting here for years.." 🙄😳
I have nothing but mad respect for you the work you guy's do is without a doubt the best I have seen . I don't want to make you mad but taking the Lord's name in vain is blasphemous the Lord loves you and died for you. The reason I tell you this is because I love you my brother God bless you...
Shut up.... take your bible babble elsewhere.
@@brianpreslik9894 It's not babble it's the word of God and he loves you too...
OMG, can't believe how smart this guy is. Wow
17:02 The fascia board is offset to lay the plywood on and flush to the fascia. They do so by setting the fascia on the same slope with the hypotenuse of a a speed square or if you’ve been doing it for years the bottom of the nail rail on your framing nail gun as a straight edge to transfer that slope and east the fascia
What about ppe or harness’s?
Or edge protection or even mobile scaffolding.
Hey how are ya? You are the man bro and your vids are top of the line. More bosses should watch and listen to how your teaching your new guys calm clear and to the point without breaking them down with insults, learning is hard enough for some people without having jokers around. And if you're treating someone like shit long enough then they'll stop giving a fuck about what they're doing and that shit spreads like cancer. Thanks for the awesome vids keep them coming cheers. Jason
The people complaining about safety are the same people who hire the people who sit outside home Depot... if you want safety hire union guys and pay triple
Right!?!? Can’t stand reading all the comments from these f**cking wimps like “omg they aren’t wearing boots or gloves or jeans or hard hats or bubble wrap suits...” blah blah blah. Drives me nuts
Bull crap, I'm neither. I worked in high winds, ice and high pitched roofs as a farmer. I didn't wear hard hard hats but turning your back 1 foot or so to the edge of the roof is stupid. Some things I was fine with others I wasn't. Not everyone has to agree to his opinion of work, or mine. SMH just insult others SMH
Well done job, I live in Brazil, and I would like to make a roof like this in my house, and I would like to know, what is the minimum distance that should leave between the ceiling and the OSB, thanks in advance
There are Roofers and then there are guys who "do roofs".
Excellent comment! The roofers I know wear appropriate shoes, gloves and a safety harness. Accidents ready to happen. I'm wondering why the buyer didn't demand work be done by a licensed roofer.
@@texteacher7706 sneakers are appropriate footwear and harnesses aren't need on a one story 3 pitch. You thought you sounded smart
@WeeStrom CO Guy no you won't make a few grand and if you do it will be used to pay bills and labor and materials. Nice try tho .you make it sound luxurious to be a business owner in the construction field. What happens when you get a bad customer owes you that few thousand that you say you make a day but he owes you a few days at a few thousand.
@WeeStrom CO Guy never met a we storm company that wasn't a liar .mechanics liens work after a year or two in court.
@WeeStrom CO Guy sneakers are appropriate roofing shoes so they don't kill the shingles especially when it's hot out. You would want them wearing lug soul steel toe boots while doing a roof ?
If he would have went through that ceiling, I would have had to get my 2 chuckles. Nice video.
Top row of osb under 10 in has to be double clipped
#ZackofallTrades thanks for the honesty in your vids. It's integrity! Great to see TY!
13:55 Shakes truss, results in 20 drywall screw pops in ceiling below. Probably a lot more just from tearing off roof deck. 14:20, a little late to be concerned with truss wobble. 14:55, what'd he say earlier? Don't drag sheets across gutter? 16:05 "We need those H-clips." Try T&G ply instead, a lot more robust. I bailed at 21:00
Lol didn't wobble it that hard! Everything is fine. And we brought it up the ladder it didn't even skim the gutter. You know people have given some constructive criticism on here n I'm thankful for it but I hope you don't live the rest of your life like that lol must be miserable to think like you.
Ive done fences for folk like your self, worst 3 days of my life everytime.
spoken like someone whos been in construction for 10 years and never managed their own projects
People like you probably never worked in roofing or in the trades. You’re just a Karen. Have you ever considered they wanted to save money so this customer bought osb? Literally nothing you say will matter.
Great Video. Thanks
That's not plywood. That's OSB. There is definitely a difference. "H" clips? I never saw H clips 'till I saw OSB.
Ray Brensike I’ve seen H clips with CDX and even ZIP. Depends on local codes and customer requirements
Its crap. He said it was his Buddies place I wouldnt recomend OBS to a friend. Advantek or CDX. Advantek is awesome.
Any rafter system spaced more than 16” on center (apart) requires H-clips trust me that’s the code been did it for seven years, was lead carpenter (boss) for 3.5 yrs
Even on 16" centers I still use H clips, typically. They're cheap and you literally just place 2 every 8', it's not a time waster. Been in construction for 5 years and while yes there is certainly a difference between ply and OSB...no one has ever asked me for a sheet of OSB on a job, its just called plywood by nomenclature. Dont watch a 30 minute video from someone more experienced and call him out for a common use of a single word 😂😂
Can someone explain the reason for deck replacement?
Also is this Captioned as I need this. Thank you
@ohyeahthatsright3155 the homeowner was requesting it. Also, this was mostly the addition in the video, the house plywood was way worse than this section
@@NWIVeteranConstruction Thank you for the reply and sharing the knowledge.
It is priceless.