How To Remove Shingles
Вставка
- Опубліковано 22 лип 2024
- If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Shannon from www.house-improvements.com shows you how to remove old shingles.
If you have questions about your home improvement projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-improvements.com
Facebook: / 180657245288627
Twitter: / house_improve
Here is a link to all of our shingling videos: • Roof shingling
Video © 2016 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada. - Навчання та стиль
![HOW TO ROOF A HOUSE! [DIY]](http://i.ytimg.com/vi/PioKr-pyR7k/mqdefault.jpg)
Thank you for sharing this. It's been 43 years since I've done a roof on a cabin. I'm attempting to replace shingles on my shed, but the pitch is pretty bad for a 62 year old with artificial joints, but the roofer from Church was quoting way too high so I needed a lesson in doing all of it. Hopefully, I can get my busy son to help me. I like that removal tool. When I succeed I will save $2500 and have a ladder and tool I can still sell before we move and rent this house out.
Great training, these type videos come in handy when you're needing to do some repairs
Great job. I have seen very bad job a lots. Thanks for showing how a clean and proper work looks like.
Shannon, this is why I subscribed to your channel. You are such a wonderful teacher. I just finished watching this roofing series. Thank you again for generously sharing your knowledge.
Very helpful for this first-timer from Ontario. Much appreciated.
If you can get under the tar paper you can work from the top side and let gravity help move the shingles down the roof as you progress down the roof.
I enjoyed the video! When I was young I would have gotten up on a roof and jump from it and jumped from roof to roof as they were that close... . Today; Nada... :) But with that said; I'm finishing up on a new tile floor in the upstairs bathroom; cabinetry and a granite sink base. Your advice here is priceless... Thanks...
+Curiosity Thanks we are glad our products are helpful to you . Please click the thumbs up symbol on any of our videos that you watch and like.
Hi Shannon! This video is so helpful my friend! Thanks so much!
My dad is paying me to get the shingles off our shed so thank you for this.
Thank you for posting the videos that you do. You have inspired me to do my own roof on the garage. ...I have learned so much from your videos. Thanks again!!!!
I'm sure it leaks.
@@davidbranca8560 I'm sure it does
Thank you for the video. Very helpful, as I will be stripping my garage shingles in the next few weeks.
Seen a few of these roofing vids and very rarely do people show them starting the tear-off of the first rows. Tearing off the field is pretty easy to understand, how to efficiently start the edge without scaffolding either from the roof or a ladder is what I would like to see.
The shovel tip will be very helpful on my 150 year old house. Trash bags and my old van is my cleanup plan since the local dumpster guy doesnt like delivering in my neighborhood.
Thanks Shannon your the best love the clear explanations you give.
Well done instructional video. Clear and articulate dialog. Will review your other videos.
Thanks Al, please do
Thanks for this, needed a refresher on removing. Being asked to remove the shingles off a roof.
Refresher? Man you kidding right?
Thanks for taking the time to do the video!... I appreciate it !
12 minutes to demonstrate how to tear off a roof is ridiculous tho!! This guys slower than turtle shit
And there's parts that are fast forwarded !!
Thank you for sharing your experience
I tried all kinds of “shingle shovels” and I always came back to my old t handle spade shovel. If you have laid shingles before it helps you understand where the nails are and how to tear them off. If they are on plywood and not crumbling you can remove them quickly without leaving any nails or debris behind. Old board decking is another animal, steep roofs are easier to clean as you go.
Thanks for your video. Very informative as always. Thanks a lot once again.
This is Great! I am starting my roofing project tomorrow. Will update you once I am done. May have to ask some questions along the way. Wish me luck!
Please use our forum for questions. www.house-improvements.com/forums/
Joe Russo 😂😂 wish you luck on a roof. Buddy you must have money to burn on material
About the cost- in Calif, roofing contractors are required to pay for worker’s comp insurance. The last time I checked, my insurance cost the same as the wages. That sends costs up.
I really enjoy your videos! Well done!
Wow, a 30 second video squeezed into 12 minutes. Good job.
Thanks for the clear instruction!
Wonderful instructions. Many thanks.
Very good presentation, thanks.
i learn so much thanks Shannon!
Should be called "how to remove shingles the slowest way possible"
I tried to find your video on how to remove shingles faster and.....well it does not appear you have one! LOL If you wanna sit back and criticize then put yourself out there like the rest of us on You Tube .
Great timing! I need to re-roof my garage this summer. Never done this type of work before, so a garage seems like a great place to start. Can't wait to see the roof go back on.
+keifsanderson perfect,please keep watching for them. Also please click the "thumbs up " symbol under the video to help our rating if you like what you watched
Would love a video on installing shingles, building my first house as I type this! Thank you!
+Levi Thomas we have a bunch of shingle videos coming out in the next few weeks so subscribe and stay tuned. We cover pretty much everything you will need to know.
Awesome! Thanks so much!
Here in Nova Scotia we have to plastic cement all the tabs down. Shingles dont come off separate like here in the vid.
For those saying why is there no ice and water shield, it is because it wasn't code back then and it cost more so guys didn't use it. Furthermore as a journeyman roofer all aspects of your roof should be replaced 100% cause you can't guarantee ever they will make it to the next re roof and careful when walking on felt paper on the roof, have seen a couple people fall off the roof doing that
Thank so much for your great details video
He recommended we have a case of beer while roofing lol
The concept, as I understand it, is that one asks the favour of friends to help during the project. The treats such as beer and/or pizza would be consumed during the completion of the task, or having reached a certain stage of the project that would warrant a "break" period.
@@arctichare8185
I usually just pay them. I find it very rude and wicked to ask for someone to spend hours of their time without getting paid. I'm a businessman, not a slaver. But, the pizza is a good idea, too. Food puts everyone in a better mood. Music is another one. I had someone install flooring for a house, and he needed his music.
Thank you! This was very helpful!
I am getting rid of my shingles on the roof and going to install metal in place. Do you have any videos showing this process? Thanks for the excellent tips. I'm sure for you it is very basic but for us it is an education.
Thank you so MUCH!!!! INVALUABLE INFORMATION!!!
Had my roof replaced last year. Those guys just removed them by hand, stacked them, and then put the stacks on the top of their head to take them to the dumpster. Pretty impressive.
That works with a one layer tear off. No bueno for more than one layer.
@@bobdunagan9101 I would never install a new roof over the old one.
Actually it'll work with even a 3 layer. May not stack on head but hold in arms. Much more professional
hi Shannon great videos....you helped me install my garage doors. My question...do you have to remove any and all staples remaining? or can you just tap them down with a hammer ? Thanks
Excellent info. Thanks
I cant believe people give him thumbs down. Haters. Love your videos!! As women good step by step and advise.
I need to do my roof. After watching this video I think I can at the very least remove it.
Great video. Thks
Another Excellent video, Shannon! Thanks for sharing and producing this video. I have an A-Frame roof with a 60 degree angle (off the horizontal) to tear off. The sub-roof is 1/2" OSB. Because of the 60 deg pitch, I'll have to use Roof Jacks as I work my way up the roof. Also, I expect the shingles will just slide off the roof by themselves once I've torn them off with the roofing shovel, so I'm just going to place an old pool cover on the ground to collect the torn shingles, nails, and other debris. Actually, I'm sure they'll get hung up on the 2x8 boards on my roof jacks. Any other suggestions on how to tear off a 30yr shingle from an A-Frame would be most appreciated. Thx!
Appreciate your info!
Good Job man ! thanks
I usually go under the shingle below the lead flashing and it releases the nails in the lead pipe flashing easier ! Its good idea to tarp below the gutter lines for easier clean up too . Its been 18 years since I did a tear off!
Thank you so much. great simple video on how to remove shingles. Love it, thanks.
I love your videos your a great help thanks
Awesome videos! I like your quality work. I'm looking at an older home that has thinner plywood across the rafters. I'm planning on replacing it with thicker (3/4 I think) would it be easier to just cut the plywood in sections from the inside vs. removing all the shingles nails then the plywood?
Not sure cutting from the inside would be very easy. You could cut from the top side but I would recomment removing the shingles and then plywood anyways.
youre a great teacher
Thanks for the video.
I would definitely love to go work with this company. 🐢
Gabriel Mendez Roofing isn’t for lazy people.
@@gabrielmendez7669 screw you man you dumbass
Good day, my friend. Great videos and work. Just a quik question. Would it be better to used paper #90 or shingles. Will be doing it my self and might be easier to install the #90 thanks God bless you and thanks for your help with this videos. Have a great day!!!
please use my forum for questions. www.house-improvements.com/forums/
Thank you for your clip!
Hey Shannon, I just wanted to say thank you for putting together these great DYI roofing series! I had a quick question for you, would you recommend stripping the shingles off and leaving the roof bare under tarp for a few days in between if you have the spare time? Or would you recommend just waiting for a patch of cloudy/sunny days to do it all at once?
Thanks again Shannon!
You can tarp it up , but be sure your tarps are well secured incase a wind or storm comes up. I normally would strip one side and then shingle that side leaving the rest of the home covered up. Or you can even strip off as much as you think you can do on a side , install the new shingles to that point and strip some more again to keep going. Either way you want to have some tarps available incase a storm comes up.
HAY?
I loved your instructions - watched a few vids of yours..
Need a simple advice... as a general matter..
We have some shingles carried away by STRONG WINDS! I estimate that the lost patches are about 20% of the whole area...
As a general rule would you recommend replacing the WHOLE ROOF or just fixing the damaged areas?
patching will be fine ,you may find though that you can not get a perfect match most times so if that is an issue for you then you may want to do the entire thing. From run to run at the factory they can be slightly different in shade/color
great man, thanks !!!
Great video as always shannon!
+AccordBass12 thanks!
+HouseImprovements No problem man!
ahh I need to learn as much as you. Great man!
David Santos why? He’s an idiot lmao
great video
I am a homeowner with a 2-story roof. With that in mind, would you please do a video on how I could use safety equipment to re-roof the 2-story. Please include a section on using roof jacks.
Safest way is to hire a licensed roofer, just ask a few actual construction workers, not contractors, who they would recommend. That's the safest. Anybody that ask for payment before completion instantly remove from options, people who do the job before they receive payment always do better work and have more pride because they believe their work will speak for itself when time to collect. But you can do yourself, just make sure Jack's are nailed in rafter so they don't pull out, and when you nail on make sure when you nail shingles over them the break don't fall where Jack's were. When your done just lift shingle drive nails down, tar over nailheads and nail shingle down. To be really safe you can buy harness and harness off but hell, who doesn't wanna live on the edge a little. Enjoy 😗
Good job!
This dude has to be Canadian right? I'm totally here for it 🤣
Fun, fun. I like a leaf blower and a large magnet up there.
+binnsh Good ideas. I forgot to mention in the video that if there is lawn around the house I like to roll out some tarps to catch the debris that hits the ground , much easier than trying to clean it out of the lawn.
How much would it cost to replace my roof if I could hire 10 guys like this guy? You don't find this type of attention to detail anymore because roofing companies would go out of business. Nice work man!
It would cost more than it's worth. In the old days if a crew was slow then yeah probably good quality works. Today, with advancements in tools, if a crew is slow then they have no idea what they are doing. Fire immediately. 👍
lol not true
We have 2 to 3 days to get a roof done or our boss would fire us if we took longer any size pretty much but to be honest me and 5 other guys get it done and are on to the next one really hard keeping that going for a couple weeks but cant beat the money at the end
There is too many critics that don't seem to realize that this is for the DIYers and not a full time production crew. I started from the bottom so that I could shingle then seal it up between the old and new on rain days. The scaffold is a great idea, I set the boards at three levels to make getting up and down so much easier than a ladder and it made getting the bundles up there much safer.
Not sure I understand how scaffolds make getting shingles on roof, safer or easier. Either way you have to climb ladder up scaffolds right?
@@imnotgood15aka.notgood21
Because you can do the bottom 4ft of the roof by standing on the scaffold, rather than being on the roof facing down.
@@robertalan4717 well, what I was meaning is easier or faster or better in anyway. I roofed for 18 yrs so to me this is laziness. Not to mention most men should have most of that side, "really all of", tore off by the time they can set this contraption up and get started. Roofing is not hard, just have to be a man about it, that's all.
@@imnotgood15aka.notgood21
See I'm not a roofer, I'm a tree worker, having spent 15+ years removing and deadwooding sometimes huge, like 120X100ft oak trees. Years spent working within feet of 4000-40,000volt hydro lines. Sometimes I would bend a branch down into the line to hear it sizzle like bacon. But I'm older now and I'm going to do things the easy safe way and it only takes 10 minutes to set up a scaffold with wheels that I can move along the eaves. Being a climber/trimmer I can easily climb up and down the boards. There's really no rush. A safe good job is priority. Yes I have respect for roofers. They have to deal with extreme heat and cold and heights. It is one of the most difficult jobs. Cheers.
@@robertalan4717 I agree, but you can't tell me that those scaffolds are safer than screwing a harness at the ridge and wearing it. This guy slips he falls. I slip no scaffolds and still don't fall. Takes two minutes to screw 3 screws at ridge and throw harness on. Bet you can't set scaffolding 2to3 scaffolds high all the around this house in less than 30 minutes, by that time Ill have half the roof off and you will just be getting started. Then not only will I be done long before you but you have to take all that scaffolding down. I'll be faster, safer and do less work.
Cheers. 🥃
Those shovels are a must have , the points let you get in between the nails to pop them
I just bought one that looks totally different, it has an edge on it that looks like a dog hair trimmer. After watching this I think I should go back and exchange
Thanks so much - will attempt this myself - question on - How bad would it be to hammer in the remaining nails sticking up, vs pulling them out?
no problem
Nice job buddy
No paper underneath. My roof has so many layers like 10 my roof is trying to cave in. Instead of taking any off they just kept adding
thanks good ideas
Awesome video
+Julian Cabrera Thank you
Love the videos Shannon. Just one question...How long would it take you to remove a roof with multiple layers (3) of shingles?
difficult to say, depends on size of roof and access to removal and amount of help you have. A 1200 sq' roof with one layer may take a first time single person over 2 hrs possibly
Thanks
Hello Shannon! Here's a question - a fellow told me once that it's a common thing to cut the Metric shingles to the size of the English ones (English are discontinued a long time ago). Have you ever had to do such a task? What would you recommend? Taking into consideration that this should be a guaranteed job not just a DIY. Thank you in advance for your answer and for your awesome videos!
I guess if you are patching a old roof that has old size shingles but I have never seen that. No reason to do that on a new shingle job.
I just replaced my shingles with my dad and a friend. The old shingles had about 10 staples in each one. We pulled staples for 2 days, completely killed any momentum we though we would have.
if your right handed you start in top right ALWAYS! (unless it was nailed left handed then it gets interesting) find the god 2 shingle pattern then pop all nails repeat till roof is ripped. Some people do a 3 shingle rip starting in same spot i only seen 1 guy in my 10 year career do this. Exceptions if its hot and sticky and the seal isent breaking, square out a nice section with your ripper and roll it up getting all nails. (This sucks but happens usually when you rip in afternoon and dont get there at 7 AM) should have everything you are going to rip for the day done by 10-11 AM
Any good tips to find the right shingle MFG and maybe type of shingle composite that will out-perform the basic? We get a lot of strong summers in the 90-100 and even 110F peaks every year..then for winter we do get a few weeks or more of a good rain, some with storms, and strong winds, and often gets cold to the 40's and some rare time dip into freezing a couple days a year.
Honestly ask neighbours and friends what they have used in your climate and how it has stood up.
Boss 🙋🏽♂️! Your a real master 🙏🏽👍🏼
Wish I knew someone to help us
I trying to enclose my patio to make a sunroom. How would I frame the walls if the roof overhang of the house goes about 4 inches under my patio as shown in the picture below? Notch the studs around it or saw off a few inches of the roof to meet the exterior of the wall?
s62.photobucket.com/user/T1mac23/media/1913D8E6-506F-4D61-9CE0-9839911D110B.jpeg.html
Thanks for your help
Wonder why no roofing paper?
. ty
Is it really necessary to take the old nails out with the old shingles? Particularly if a steel roof is to be installed?
not really , pound them in flat with no shingle debris under them
I can certainly see this is strenuous work, but for the roofing industry to charge what is often four to five times the material cost for removing and installing a new roof (especially for a 6/12 roof on a square house) is a bit absurd. Or equally absurd that an able bodied person would pay for this. Not to mention the fear of paying people and the job not getting done right or short cuts being taken. I'll use a harness and get on my own roof.....though I am anticipating possibly 2-3 days of struggle on my small 600 sf roof, and dread any deck/substrate issues, however I think it will also be rewarding beyond the financial aspect....kind of like changing the oil yourself for your car, reclaiming your "man card".
So many scams, too.
Agree. Been getting quotes for my roof lately and decided to do it myself due to the costs being so insane. I priced the materials and its maybe 2k and thats me without a contractor discount etc and im getting quotes for 8-12k to have it done.
You have obviously never taken a roof off the heat and the nails and so much other shit idgaf if it’s 3x more then the material cost I kill my self 12 hours a day on the roof I’m doing
@@babytronjr2178 Yeah, I can see it is definitely strenuous work. My roof is small, maybe 5 or 6 squares, not very steep of a slope, and since I don't have to keep a schedule for anyone but myself, I can choose a stretch of cooler days to get it done (yes, I am aware some heat/sun is needed to get the shingles to properly bond/stick, so I will do it well before fall). And yes, you may "kill" yourself 12 hours a day on the roof, you are certainly getting compensated well for it and you have to keep a schedule to get it done....prices charged are definitely understandable for buildings with steep roofs, many angles and flashing, large roofs, high roofs, middle of summer or when demand for roofers is high. None of this applies to me and I am an able bodied person not afraid to climb my two story house. Also, 3X material cost I'd might actually consider paying someone to do it...where I live prices seem to be at least 5X material costs. Sorry if I came across like roofers are ripping people off, it is more that if you have a small roof, and a tight budget, you might want to consider doing it yourself. Lastly, I have actually seen "professionals" in videos on youtube installing shingles improperly, most notably taking the 5 or 6 inches off the LEADING edge of the shingle when they start a new row as opposed to the rake side of the shingle.....sure that doesn't matter for three tab shingles, but it does for architectural shingles. I'm not paying 3X -- 5X to have the job done wrong or sloppy, no thanks.
@@broverss Have you done it yet. What did you do for a dumpster, I'm considering WM Bagster.
If I strip a roof and then install the underlayment, how long can I wait before installing the new roof? I am doing my own garage roof with metal. I can't do it all in just one day. Probably be 2 weeks to complete. Should I use synthetic or just felt will do? Thanks!!
If you use felt you need to cover it right away or it will rip off in the wind. Some synthetics are better with wind for limited days. Check with manufactures recommendations.
@@HouseImprovements maybe I'll just strip the roof, put the underlayment down, then strap the roof in preparation for a metal roof. Then it should be fine for a while until I get the metal roof material.
How about 2x2 rafters on a double wide mobile home that are saging?
That's the fix I am in. I have. Two layers and some saging on a double wide. I even have the same color 3 tab shingles.
Good solid wood roof covering instead of rotting OSB ( SOB ) sheets.
When you remove shingles and nails are left there do you just pound some of them back in?
I pull them . The end of the shovel will do the job easier than a hammer
What is your plan if you have to leave a roof open or it starts to rain after you get it open
Have tarps ready to cover it. Screw the tarps down and place a few bundles on it incase the wind gets up. Or just strip what you can shingle in a shorter time if you prefer.
Don't know if you still check this channel. But would it be acceptable to cut boards at halfway points on the joist I'd you need to replace them....I have the lumber styler roof like I this video vs pay wood. And a couple areas need to be replaced. With the price of wood currently I'd rather not replace the whole thing if not necessary....referring to the Sheathing of course...Wil be replacing all the shingles.
yes make any joints over the rafters.
Is it possible to remove half a roof of shingles in order to overlap new felt on pre-existing felt and to only do half of the roof with new shingles. Our roof was done like 10 years ago but recently had a pine tree fall and damage only a portion of our roof. I was hoping to only shingle half of the backside of the roof but will do it all if needed.
its possible but I would not recommend it at all.
Okay, thanks. By the way, I love your videos…they've helped me tremendously
Naaa.eso talvez fue hace mucho tiempo...ahora se utiliza otra pala ..donde también salen los clavos y dejas de reclavar o sacar clavos después...
Awesome.
Any tips on removing ice and dam in order to re- roof. Stuff looks very sticky
Many times you may have to go over it with new stuff
They are replacing the roof and plywood where I live. I can still see light from outside coming through plywood. They have gone home for the weekend. Is this ok or do I need to worry
If it rains you could have an issue for sure
@@HouseImprovements Thank you
how do u handle around the electric cable and pole. what's the safe way
+t dub Be very careful obviously take your time working in that area.. If its a round pole with flashing around it re use that flashing. If its is wood you can likely remove and replace the flashing.
Top for me man!...and knee pads!...lol!...you and zack from veteran construction, don't use knee pads!?...y'all have the best roofing vids on UA-cam, but DAYUM! my knees would be raw dude!
My house was built in the 50s as well and I think it might have the wood like that roof does.. I'm considering redoing my garage cause I've noticed some waviness in the roof. Is there any way to fix the waviness?
+luis vital Please ask your question in my forum and we can discuss it better there.www.house-improvements.com/forums/
Always start from the Ridge !
And the furthest away from the dump/trailer 👌👌
The roof is stripped isn't it