2JZ ROTATING ASSEMBLY ULTRA DETAILED HOW TO
Вставка
- Опубліковано 16 лип 2024
- 2JZ build series begins!
In this video I will show you everything you need to know step by step on how to build a 2jz short block (rotating assembly) which is the main moving parts inside your engine.
Take advantage of Briancrower's 10% sale
with coupon code:garagequarantine
briancrower.com/
Parts used:
BC6305HD Toyota 2JZGTE/GE - Heavy Duty Series w/ARP2000 Fasteners
CP7464 9.0 86.5mm 2JZ pistons by CP PISTONS
BC4300 BEARINGS - ACL Race Series HX - Rods, Mains, Thrust (Toyota 2JZGE)
AR8630 HEAD STUD KIT - ARP (Toyota 2JZGTE)
AR8730 MAIN STUD KIT - ARP (Toyota 2JZGTE/GE) - Авто та транспорт
Guys I appreciate the concern about the piston size measurement. I tried editing that part of the video with a text over with the explanation but gave me video errors. The calculatordid not take the 0 into the measurement size. It shows 3.46 instead of 3.046. The result number still shows the same in the range that I am working on. Which is still 0.01730 instead of 0.17030. Thanks for looking out guys. I really appreciate the support 💪😬🔥
Alberto BIGBOOST what about con rod clearance?
Did you measure bearing clearances before you assembled the bottom end?
Alberto BIGBOOST there you go people!
Alberto, Curious why you got Away from M52 Block.. LMK
3.406 u mean. Did another typo in this response. but good you did it right!
the bore size is 3.406 but you did the calculation with 3.46 in the video. I dunno if it matters a lot
Youri Dv still ends up at .017 but good catch I saw that too!
saw it too
Came to say the same thing!
I saw it too....
I was trying to make a title over it but premiere kept giving me an error. The measurement is the same. 0.17030 instead of 0.1730
More knowledge about 2jz , can't get any better.. love this alberto
cant wait till this engine is fully built 🔥🔥🔥
And i can't wait for more rebuilding videos!
Soon I'll need to rebuild my CA18DET and I would like to build it myself with 0 experience 🤔😱
@@BossGarage measuring and preparing is the most important part. The assembly is pretty easy lol
@@Baksteen_Express idk, I never done or seen a engine rebuild before, just this vídeo of Alberto.
I need to know the lubrificants, how to torque the bolts, and many more.
My experience in the motor is only timing belt and water pump change, turbo change, engine out of the car, but I never opened an engine, so its a bit scary for me
@@BossGarage You should watch the car passion channel, his miata engine build is pretty detailed.
@@imnota thank you for the information!
what i like about alberto engine videos are that I already watch alberto, so it's much easier to watch and learn something, when you don't watch a channel and you're watching only for the education, sometimes it's kinda boring, but thank you!
bro i dont know jack shit about building engines and you still manage to get me to watch the whole video idk why lol
This is how UA-cam should be With explaining thing awesome job Alberto! Your a Huge inspiration I’ve been watching all you guys for 2 1/2+ years now crazy how far you and your team have came.
Firstly, I just want to send greetings all the way from Johannesburg, South Africa. Then, secondly, this is a lot more informative that other videos I have watched. This is AWESOME Alberto, and thanks for making the effort to show the build in so much detail. Can't wait for more... DOUBLE THUMBS-UP!!!!
I really appreciate the videos from proven engine builders/mechanics
Very calming video to watch. You’re showing great patience and care, good luck with it all mate!
Dude, you are so chill and explain everything in understandable manner !
Great Job Alberto! Very detailed and you covered what a lot of people miss like thrust bearings etc. please keep just as much detail on the upcoming videos!
the music at the end was magnificent !
I love when you do these! I also watched when you did this with the m5x/s5x hybrid build and it was dope! Thanks!
Loved this video! Would love to see more detailed assembly videos.
Wow, looks super fresh, nice start to an awesome finish.
Keep it up man! Love your work. It also shows us how to build great quality engines!
I dont own a vehicle with a JZ motor in it. probably never will. I still love this content.
You are the man Alberto ! I’ve saved this video to help me when I have to pulled my engine and see why it’s dropped in pressure ! Thank you 👌👌
Very informative & imo your best vid so far big boost! Way to go. Thanks
Thank you for this. I was going to pay someone to do it for me but i feel more confident now. Thank you for the detailed video.
Alberto great video!!👍✌💪I like how you are showing every detail, not like alot of builders that jump of how's done!!! Keep it up
Can’t wait for the final results! 👏🏻
Awesome video!! Very detailed and up to subject, i love it!!!
Great video man and very much informative! I encourage you to continue doing more DIY videos.
Awesome Alberto, you make it look simple
Great informative video always nice to watch them from you Alberto keep up your excellent work 👍
Yo this video was great! Thanks for putting this knowledge out to us man.
1x of my Top 5 channels on UA-cam period!
only the best content out here from big boost
I wish there were builders like you on TV. When I was younger there were crap shows on Speed and FuelTV.
Ciao ...job awesome video ..you make it seem easy to mount an engine 😀💪
You entered 3.46 instead of 3.406, but it came out to about the same spec, .01703 is the actual spec
And yes the math still works on the ring gap, I too have a PH in maph, thanks for the great video Alberto.
Esoooo Alberto!!!! Tan Bueno que eres explicando.
I'm in way over my head but this is just absolutely fascinating to watch!
That tip of taping the ring compressor so on point.
thank you ALBERTOO.... this is so detailed...
looking awsome alberto its gonna be a beast
this video made me want to build my jz now that going in my stang. going to follow the exact formula you did too so i know it works.
Kris Angus the krabby patty Formula
Alberto BIGBOOST does that make me Plankton trying to steal it lol 😅
Spins as smooth as a baby! That's my new saying 😂.
So beautiful... you’re an artist! 👍😎
I love these detailed videos
You da man Alberto. Real automotive UA-cam channel
very good your video !!! I love 2jz
You can add fine paint pigment + oil mixure on the end of the socket so you can visually see the bolts that have been torqued. Same as paint pen marking bolts to see if the bolts have lossened/moved
Awesome video dude, just subscribed to your channel, definitely the most detailed one I’ve seen so far !
Thank you very helpful video 😍 👍🏻👍🏻
Wish i had a homie like Alberto. Nice build bro!
The techangle torque wrench has a counter in the Rh top corner, so easy to double check and get that extra confidence
Would you consider making a video on your recommended engine overhauling tools and equipment? That would be super cool!
Someone needs to make a 2JZ pizza
For alberto
Mr big boost I am blessed to be able to watch this my mechanic school is canceled and this is very helpful for my learing
Thank you Alberto.
So, you replace the main bolts for ARP main studs and you don`t line hone the mains or at least check the clearances on final assembly. Great Engine Build.
Nice music and shots
Down to earth keep it up❤️
Very nice Video Alberto 👍
Im ready for the head assembly 😄
Fantastic good descripsion how to do it thanks.
Great video 👌🏼
Nice job!
Great video you should definitely do more how to videos new subscriber feels good here 🖤❤️🥳
Love ur videos man ...can I ask you to make a video on how to choose what compression ratio to choose on engine rebuilds
You said 3.406 but typed 3.46 on the calculator.
It shouldn't change the .017 gap that he needs. But good catch
Stuff all difference
Hi Alberto could you do a video covering how to messure clearances for bearings so u can decide weather u run std size bigger and so forth
jonny burns I can do one in another engine
Very nice albertos
Alberto BIGBOOST love watching the videos!!!! Hear in australia we have barra's !!The Australian 2JZ!!! Maybe you can do a video compering the two. Would love to hear what you think about the barra engine and how it compares to the 2JZ and the RB. Keep up the all-some work and stay safe..
Damn this is giving me confidence to build my 2jz myself instead of just having the machine shop do it. Would save me a lot of money too on labor.
He skipped ally clearances were never gone over and are the first things to cause failure
@@mk2vrt yeah that’s the part I’m nervous about lol. I wish someone would make a detailed video showing that.
Do mechanics keep a bottle of that red lube in their bedside drawers?
Bahaha
aussiesimmo I have a whole case
@@ALBERTOBIGBOOST foreplay in a bottle.
Have a bottle in my toolbox at the shop, a bottle in the car, a bottle in my tool bag, a few bottles in the house, even a few in the shed
Sick video
Went u have 1 month of free times to do video. Man i watched u since 2015 u didnt talk too much like this but i think i like it. U explain everything 😊
Super interesting video, a greeting from Italy
Keep making videos u deserve it
I love this video already ,cause I want ot bild Is200 with 2JZ GTE too :)
Thanks for the walkthrough, pizza was a top moment
Yes knowledge!
WELL DONE BERTO BOI ! M🌳
Nice video albertooo 💪
Cool how to video
Awesome!
Awesome
your channel among others made me comfortable enough to buy my own 2J project. I'll come back when i make 500hp
Hows that project goin
@@penisenlargement2319 really good actually i have a fully built longblock and am sourcing a turbo
@@diabolowho good to hear that. Your definatly gonna hit 500hp especialy with that turbo
Thanks bro
Awesome 👏🏻👏🏻👏🏻👏🏻👏🏻
Your the best thank you so much. Much help how do you know what order the pistons go
Dope video Big Al. Come up to NJ to help me finish my RBZ :)
Me gusto mucho de cómo instalar todo sobre un motor 2jz ojalá lo pudieras hacer en español aunque sea solo para armar este tipo de motores hoy en día los que instalan sus propios motores no explican como vos lo haces 💪🏼💪🏼 no entiendo mucho el inglés pero se entiende todo te deseo mucha suerte en tus proyectos
Bro I think you forget to mention or to do a 90 degrees for the crankshaft and the connecting rod thanks a lot bro fo the video keep it up and aoswom work 💪💪
Bravo Big Boost
Complete assemby next😍
Éxito big boost
Alberto! Great video. Only thing I didn't see you do was debur the rings after you ground them down to size. Also you might want to lubricate the ring compressing tool as well since rings have to slide through it before sliding inside the cylinder walls. Very little things that go a long way but you got this thing on lock!! Pizza look good too! Lol
Hey Larry, yes that is a good thing to do. I hand file the edge of the ring after cutting. And I also use atf to clean and lubricate the rings before assembly. Some stuff I dont cover on camera all the builds. Ring compressor tool I just spray with some wd40 💪 I’m glad you are looking out. There are times where I have missed things and only notice from the comments before its too late 😬
@@ALBERTOBIGBOOST 🔥🔥🔥🔥🔥🔥🔥💯👍🏼
what happended to messuring the bearing clearances? you'll be rebuilding soon, but atleast it gives you content
The crank literally came back from the machine shop and was measured to be within spec so bearing clearances are too.
I think he's built quite a few engines in his time especially 2jz's.
@@imnota one thing that threw me off was it came back from machine shop with factory main cap bolts installed then later shows caps with L19 or 625 studs. I was curious if he had it line bored/honed and was just using the factory bolts to hold the caps in or? Because that would definitely make a difference unless he got really lucky.
@@s302jzget well it wouldn't hold unless it was still threaded for factory no? Those others would never fit enough for someone not to notice
@@obxurv ARP studs thread right into the factory main cap bolt holes with no mods.
Your awesome Boost I might have you build my BMW engine
Hope 2 get a vid on a rb25 as well
Can we make a petition to get Big Boost a Lil Ceasars sponsor to ensure he has all the engine building fuel he needs? Lol
siiiick
It look and feel complicated and at the same actually easy
I never tried the stuffed crust from little Caesars... I always get the 5 dollar 1 but if big boost approves I'm gonna have to try it out 👍
🍕
i didnt see you install the 2nd split ring into the end of the rod going through the piston but i did take my plate out to the kitchen