TIA Portal: External Peripherals / Distributed I/O Shared Devices

Поділитися
Вставка

КОМЕНТАРІ • 49

  • @firasn.t.5037
    @firasn.t.5037 Місяць тому

    Super explanation, I like your way of teaching.

  • @disrael001
    @disrael001 Рік тому

    Thanks for this great piece of work...I'm growing my Automation career thanks to you

  • @OT_ICS_Cybersecurity
    @OT_ICS_Cybersecurity 2 роки тому +1

    you are actually amazing person and thanks a lot for the valuable content you share

  • @MrMouais
    @MrMouais Рік тому

    Always a pleasure to see such qualitative video!

  • @sarahlabidi6558
    @sarahlabidi6558 Рік тому

    nice video i have learn a lot of things with, just for informations: to connect the two PLC we need PN/PN coupler.

  • @simonmax3901
    @simonmax3901 5 років тому +2

    I love your videos......clear to understand and follow up.
    Make a video on Shift instructions in future thanks in advance

    • @hegamurl7434
      @hegamurl7434  5 років тому

      Thanks!
      Will put shift instructions to my list!

  • @karoliczanwojtylanu
    @karoliczanwojtylanu 4 роки тому +3

    Hi, why is the connection colour between Plc an ET200 different in each case?

  • @georgekoutsoudakis2812
    @georgekoutsoudakis2812 5 років тому +1

    is it possible to share the same module with 2 plc's? for example if we have a 16xDI module can we split it and give one byte to one plc and the other byte to the other plc.
    thanks

  • @reylepiten3722
    @reylepiten3722 3 роки тому

    Thank you very much sir for the information..more power to you.

  • @MukeshKumar-ox7uz
    @MukeshKumar-ox7uz Місяць тому

    How to share io devices with 2 PLCs. For eg 1 et200sp has 3 di and 2 dq. Now I want to share this et200sp completely with both PLCs. Means PLC 1 and PLC 2 both can access all 3 di and 2 dq.

  • @sebastiancamargo6010
    @sebastiancamargo6010 4 роки тому +1

    Hi Hegamurl,
    One question. I need to share a I/O Link master device but in your explanation at the end you set up the ports, some belongs to plc 1 and some others to plc 2. Now, can i share the same port whit both plcs?

    • @hegamurl7434
      @hegamurl7434  4 роки тому

      Simply said: No.
      You will have to send the port data from one PLC to the other using communication between both PLCs

    • @sebastiancamargo6010
      @sebastiancamargo6010 4 роки тому

      @@hegamurl7434 OK, so i will have to use get function on S7 communication. Thank you.

  • @framos9991
    @framos9991 Рік тому

    You Best! Thank You!

  • @claudio1371
    @claudio1371 2 роки тому

    Amazing video. 1000 thanks

  • @souley3diallo825
    @souley3diallo825 2 місяці тому

    hello hegamurl . in the actual state of this video with two different plc and one shared i/o device ; how to do if we want the twon plc to be able to excange informations together ?

  • @joaoalexandrecorrea7718
    @joaoalexandrecorrea7718 4 роки тому +1

    I'd like to know about pointers ans any pointers, can you make a vedeo about it ?
    Your vedeos are amazing, keep doing this great job.
    Thank you.

  • @intradeee
    @intradeee 4 роки тому +1

    How those devices are connected to each other? PLC_1 is conntected to ET200 (port 1) and PLC_2 is connected to ET200 (port 2)?

    • @ngoctuan86nb
      @ngoctuan86nb 4 роки тому

      yes I have the question same yours. Can you explain, Mr. Hegamurl?

  • @vaibhavkul4
    @vaibhavkul4 Рік тому

    I have one 1500f cpu having failsafe io also normal io on failsafe
    Other than that I have a 1511T processor i cannot connect the normal io to the 1511T processor due to mounting.
    Can i read non failsafe io in 1511T which are connected to failsafe CPU

  • @dukenuke2690
    @dukenuke2690 5 років тому +7

    Where ist the donation link or patreon?? :D:D

    • @hegamurl7434
      @hegamurl7434  5 років тому +2

      Let the channel grow a bit more 😇

  • @dukenuke2690
    @dukenuke2690 5 років тому +3

    I wonder where you learned all this. You reads books by Hans Berger? Or just from experience? Internet? What are you doing in your job? :) Just curious..

    • @hegamurl7434
      @hegamurl7434  5 років тому +4

      A little bit of everything. I have to admit though that I don't like reading the theory from books... I rather test and try out. Also the help function in TIA Portal is VERY helpful in my opinion!

  • @ngoctuan86nb
    @ngoctuan86nb 4 роки тому +1

    Thank you for your video, but I have a question: How do PLC 1 and PLC 2 connect to the ET200 (physical connection)?

    • @glatocha
      @glatocha 2 роки тому +1

      ET200S had two Ethernet slots

    • @ngoctuan86nb
      @ngoctuan86nb 2 роки тому

      @@glatocha thank you!

  • @ipswich84
    @ipswich84 2 роки тому

    Good video, was there a work around to connecting the two PLC’s?

  • @lowidarwish9208
    @lowidarwish9208 Рік тому

    Rockwell automation Allen Bradley is more easy then Siemens , more easy and friendly user but most people do not know

  • @plcautomationsolutionspvtl869
    @plcautomationsolutionspvtl869 5 років тому

    Does the interface module needs to be of high feature(HF) ??
    Is this possible with ET200SP?
    video is excelllent

  • @АндрейСидоров-ц3ж
    @АндрейСидоров-ц3ж 5 років тому

    It's mean that PLC_1 is connected to the first port of ET200s, and PLC_2 is connectred to the second port of ET200S in reality?

  • @scodorov
    @scodorov 4 роки тому +2

    Is it possible to read the same input module from two controllers?

    • @karoliczanwojtylanu
      @karoliczanwojtylanu 4 роки тому

      Good question. Anybody?

    • @iqsyb9081
      @iqsyb9081 3 роки тому +1

      I think so yes because one input can be called more that one time, if both controllers and input are connected

  • @saeed2tube
    @saeed2tube 5 років тому +3

    Hi.
    If you can please make clip about cpu redundancy.
    Thankx a lot.

    • @hegamurl7434
      @hegamurl7434  5 років тому

      Very good idea, will put it on my list!

  • @anoop22march
    @anoop22march 5 років тому

    Sir , how we connect to Two ET200S Module to one CPU having one Profinet port, we have to use switch for it or what?

    • @hegamurl7434
      @hegamurl7434  5 років тому

      Depending on the ET200S module... they can have two ethernet ports and you could just daisy chain them. But a switch will also work fine

  • @santoshkumarpatro2772
    @santoshkumarpatro2772 5 років тому +3

    Hates Off to you Sir

  • @ghosthunter9897
    @ghosthunter9897 Рік тому

    13:43 PN Coupler must be used to connect 2 CPUs with same IP and Subnet.

  • @zhengkunyan8001
    @zhengkunyan8001 4 роки тому

    nice guy

  • @emadabas1479
    @emadabas1479 2 роки тому

    we need some videos about PCs 07

  • @thomassaook7787
    @thomassaook7787 Рік тому +2

    for god sake's why had you stopped talking about TIA Portal?

  • @zhengkunyan8001
    @zhengkunyan8001 4 роки тому

    😄😄

  • @JinsonKurianVJames
    @JinsonKurianVJames 5 років тому +2

    I am First viewer.