Was it difficult to open up the HP35S to access the LCD panel? My experience with these panels is once the rubber contact strips are removed from the LCD glass, I will get missing segments. With an old Casio calculator which doesn't have backlight, I put a strip of aluminium foil as a reflective surface, held in place by tiny tape at the edges. This method won't work with Casio watches as aluminium foil is opaque unless it is illuminated by LEDs at the side.
![[DIY] Custom 'Wording' G-SHOCK](http://i.ytimg.com/vi/rKoos4eXLTw/mqdefault.jpg)
![[DIY] Custom 'Wording' G-SHOCK](/img/tr.png)
Should i replace the background sticker ?
If yes, where i can find it ?
And what kind of glue i can used ?
Great video ❤ you mentioned about not rubbing off the polarizer, is it part of the silver sheet? Or a separate layer at the back of the screen?
The polarizer must still be there because LCD screens don't work without them.
It worked for me. Thanks a lot.
Awesome!
Whats the degree you use? 0/90 degree or 45/135 degree? Waiting for your answer 😄 any suggestions what to use?
I normally just eyeball it to whichever angle that create the clearest display.
Nice work.... Does take a lot of patience and caution to remove the adhesive from the glass
Hello, it is not enough tear glue. It need new one-way mirror foil in the background. Then You have full reflective
What if you use white paper or something als as a background
You expect to buy GBX100 when released next month ?
Not sure, in June perhaps. During summer season.
Nice work Shaz!👍🍻
Thanks!!
Your videos help me a lots thanks👍👍👍
Will Casio fix this issue if we send them our watch
They will, if they still have the parts. Doing this ourselves is way cheaper & faster.
Thank you very much, I am grateful
Bhai mery watch g shock me half time aata hai please issues ko thiek karnay ki video bana
Need more details on the issue
Hi i want to ask why my schok no LED light
Check the led connection on the circuit board
What do u called that foil u replace?
hi, will this work on prg250?
Are same to fix lcd protrek prg ?
Casio usually made them the same way. Give it a try.
Ha ha, the LCD panel on my Made in China Hewlett Packard scientific calculator HP 35S has this problem. And it uses non-rechargeable CR2032 batteries.
Seems like this solution is applicable everywhere. Noice!
Was it difficult to open up the HP35S to access the LCD panel? My experience with these panels is once the rubber contact strips are removed from the LCD glass, I will get missing segments. With an old Casio calculator which doesn't have backlight, I put a strip of aluminium foil as a reflective surface, held in place by tiny tape at the edges. This method won't work with Casio watches as aluminium foil is opaque unless it is illuminated by LEDs at the side.
What is the next step after cleaning the glass? How did you do it?
thank's bro....nice work..
*_Nice music!!!_*
Nice work, anyway can I re-use that sticker again? (If yes) what kind of glue you suggest?
You can buy aftermarket background sticker or chromatic plate. The plate compatible for all digital gshock
@@ironwaste3704 Thanks for this info
❤❤❤❤❤
Cheers
What kinda glue you use?
Not any glue. I just leave it as it is and install it back plain like that.
what about this background name?
Just a piece of sticker to add color to the display.
Any type of thin paper or transparent plastic could be used as replacement.
Just a piece of sticker to add color to the display.
Any type of thin paper or transparent plastic could be used as replacement.
@@gshockhighfashion thx so much sir, i alredy try with alumini backgroud, but still dark on display,
i use the polarize for lcd phone, but to bad for the contrast. sory for my english. 🙂
Hi friends
...or you could just buy another G-Shock and be good for another 10 years.
if it actually lasted 10 years 😅
@@gshockhighfashion True...it just seems like a lot of work for a very cheap, easily replaceable watch.
I wanna know what cause this
My guess, long exposure to direct heat from sunlight