I found your channel searching how to restore the lcds from a couple o vintage seikos that came in a lot with some automatic. Keep the videos coming..... Can you revert with a link for the films you are using? In the comments of your casio video you say that you are using metallic stickers on the back. Pls provide more details, or make a video with links. Nice job my friend!!!!!!
hi sir, about the polarised film i bought it from a shop nearby my area, but u can used any polarised that meant for smartphones, TVs or monitors, it works just the same. and as for the metallic sticker it depends on the model of the watch for instants for Gshock it uses backlight ( illuminator ) so it doesn't need a metallic back polar for it, and for some vintage casios it uses LED for the light... and for this one u need a metallic sticker to make the numbers brighter.
please do not use Mirror Polar, because if you do so you wont be able to see the digital because of the reflective properties... so it will become useless.
@@abukambing177 In all Casios, a mirror polarizer is initially installed on the back side, isn't it? and everything looks great. I didn't quite understand what you mean
@@28lucky16 the trick is to use both normal polarized film on both sides of the lcd... but u have to find the right angel for the film to work... tried the mirror ones... turns out to be worst and looks not original from the factory.
@@abukambing177 friend, I tried right now to change the rear polarizing film on my g2900, with the rear film removed, nothing is visible at all, and when I glued the polarizing film it became very very dark. What to do?
I used a hair drier to remove moisture from my negative display g shock but now the dispay is so dim it's nearly invisible. Anything i can do? It's my oldest watch I'm gutted.
My old DW6600 EL backlight turns on by itself. Then, it will not turn off unless I press the EL light button again. Have you encountered this problem? Battery is new, by the way.
Assalam tuan, izinkan saya bertanya. gshock saya g300 punya lcd selalu terpadam, tapi selepas tekan butang apa2,dia kembali ada. Selepas beberapa saat/minit dia hilang kembali. Kenapa ya tuan?
Wassalam tuna... oh selalu kalau tekan butang lcd padam pastu ada balik dia menunjukkan battery dah low... voltage current lalu board x cukup.. cuba tukar battery baru then buat AC reset. tgk mcm mana
I found your channel searching how to restore the lcds from a couple o vintage seikos that came in a lot with some automatic. Keep the videos coming.....
Can you revert with a link for the films you are using? In the comments of your casio video you say that you are using metallic stickers on the back. Pls provide more details, or make a video with links. Nice job my friend!!!!!!
hi sir, about the polarised film i bought it from a shop nearby my area, but u can used any polarised that meant for smartphones, TVs or monitors, it works just the same. and as for the metallic sticker it depends on the model of the watch for instants for Gshock it uses backlight ( illuminator ) so it doesn't need a metallic back polar for it, and for some vintage casios it uses LED for the light... and for this one u need a metallic sticker to make the numbers brighter.
Wowwww now it looks brand new!!
Thanks for the detailed video. How did this watch end up with no rear polariser?
Thank you sir. I have no idea since i bought it from a second hand / vintage store.
Kalau keluarkan battery memang nak ac reset juga ka tuan?
Thank you for this amazing tutorial!!
Thank you! I have a couple of donor watches that I can experiment with and use for practice.
Great work Sir!
Short question, did you use simple polarizing film, not "mirror" polarizer?
please do not use Mirror Polar, because if you do so you wont be able to see the digital because of the reflective properties... so it will become useless.
@@abukambing177 In all Casios, a mirror polarizer is initially installed on the back side, isn't it? and everything looks great. I didn't quite understand what you mean
@@28lucky16 the trick is to use both normal polarized film on both sides of the lcd... but u have to find the right angel for the film to work... tried the mirror ones... turns out to be worst and looks not original from the factory.
@@abukambing177 when apply a film on the back side also needed to choose right angle? Also how we do on the front side?
@@abukambing177 friend, I tried right now to change the rear polarizing film on my g2900, with the rear film removed, nothing is visible at all, and when I glued the polarizing film it became very very dark. What to do?
I used a hair drier to remove moisture from my negative display g shock but now the dispay is so dim it's nearly invisible. Anything i can do? It's my oldest watch I'm gutted.
Maybe you may have tempered with the polarized film... try to change the polarized film first.
Would you be so kind as to tell me where you buy the tinting film?
Congratulations on your very educational videos.
Se ve como algo demasiado prolijo y profesional; me encantaría hacerlo pero no me animo, no podría tener tanto pulso y delicadeza
My old DW6600 EL backlight turns on by itself. Then, it will not turn off unless I press the EL light button again.
Have you encountered this problem?
Battery is new, by the way.
Salam bang...nk bertanye skit boleh???ape name bende yg Abg tukar Tu?? Back polar ke???
Hello :) in this case i replace both of the polarized film on the LCD as it is old and starting to fade.
Hi, do u provide restoration service in malaysia ? 😊
i used to do it last time but now not really coz i dont have time to do it :(
Kedai abang dekat mana bang.. lcd gshock sy mati.. lampu jer nyala
saya takde kedai tuan... kalau tu hrm kalau penah bukak LCD check balik ribbon dia.. kalau tak mmg kena tukar LCD seketul
@@abukambing177 assalamualaikum bang jam saya replica say bagi dekat kedai.. dia kata Tak boleh buat.. ada cara lain Tak bang..
Is ot possible to remove the "G" on the backscreen?
yes it is possible, because the G is just a card that has been placed behind the LCD.
saslam bang. kalau nombor nya ada yg keluar tak penuh mcm mana pula ye. masalah yg sama ke
oh tu kemungkinan dia punya Connector ribbon dia kotor... if kalau kes yang teruk, lcd tu dah rosak
Hi tuan,nk tanya bolh
ye boleh tuan..ada apa tu?
YEAH , NICE JOB . PERFECT FIXING . WELL DONE ! 😉👍
GRETTINS . 😀🤚
Thank you :)
@@abukambing177 IS NOTHING ABU .GET A NICE DAY ! . 🖐️😉
@@abukambing177 cómo se llama el platicó que le pusiste ala pantalla saludos
How much does it cost to get this done
not that expensive :)
Assalam tuan, izinkan saya bertanya. gshock saya g300 punya lcd selalu terpadam, tapi selepas tekan butang apa2,dia kembali ada. Selepas beberapa saat/minit dia hilang kembali. Kenapa ya tuan?
Wassalam tuna... oh selalu kalau tekan butang lcd padam pastu ada balik dia menunjukkan battery dah low... voltage current lalu board x cukup.. cuba tukar battery baru then buat AC reset. tgk mcm mana
And a battery with tweezers... 😲