Replacing Bank 1 Camshaft Position Sensor On 350Z - P0340
Вставка
- Опубліковано 30 кві 2018
- Comment any questions you have, and I will do my best to help you! Also feel free to comment any suggestions you have! I respond to every comment!
In this video I show Z owners how to replace the Bank 1 Camshaft Position Sensor. The Bank 1 sensor is located on the PASSENGER side of the vehicle.
Share with all your Z friends so they know how to fix this issue that is common on all 350z's.
Follow my social media accounts to stay updated on future tutorials for my drift build!
Instagram: @FairLady.SuZie
Facebook: @FairladyLindZ
Proceed at your own risk. I am not responsible if you harm yourself or damage your vehicle. If you do not feel comfortable doing this yourself, please consider taking it to a professional.
Parts Needed:
Bank 1 Camshaft Position Sensor (Passenger Side):
shop.advanceautoparts.com/p/d...
Bank 2 Camshaft Position Sensor (Driver Side):
shop.advanceautoparts.com/p/d...
Music:
Aaron Trask
/ aarontrask
Alessia Cara - Here (Lucian Remix)
• Alessia Cara - Here (L... - Авто та транспорт
Just changed mine on a 2003 Touring. I used a 10 mil combo wrench and got mine off with ease. As far as the removing the sensor from the harness once you slide the clip you then have to continuously press down while pulling the sensor free from the harness. No prying needed at all. Don’t forget to reset computer and clear codes. My Z starts with no issues and doesn’t turn off at random anymore. 👍
5 year old video saved me, thanks man!
Supporting your channel!!!
hey man i appreciate the video so much , i literraly replaced my sensor 20 mins ago !! from one Z owner to the next , much love and respect!! you got a new sub!! keep up the great work man!! #somtimesthefairlady #aintsofair #butsheworththe #headaches 💪
Thanks for the kind words man! I love knowing my videos help people out ✌🏻
Thank you! Lots of good vibes coming your way. Cheers.
Glad I could help! And I appreciate the good vibes ✌🏼
great intro great explanation.nice and fast and straight to the point
Thank you so much for this! Removing the old sensor was a bit of a pain but I got it eventually. Appreciate the video man
I’m glad I was able to help you out! Love seeing these are still being watched and are useful ✌🏽
@@FairladySuZie Absolutely! :D
Are you subscribed? I haven’t uploaded in a long time cause I sold the 350Z, but if you see my profile pic I’m gonna start uploading again 👀
@@FairladySuZie Just subbed! :D
Much appreciated 😁
Nice video man
Thanks man. I’m my brother in-law just fixed it with your video.
Nice! Glad I was able to help you guys out! ✌🏽
Thank you so much for this video
Glad I could help!
Thanks bro. Much appreciated
Anytime man! Glad I could help ✌🏽
Muchas gracias me ayudo mucho tu video. Ahora me sale el error P1084 alguna sugerencia?
Y see.. i am getting CRANK POSITION SENSOR 335, AND AND THE BANK 1. Are they the same? and wich one should i replace first?
Good morning. My 05 z is only starting when i step on the gas, and it takes way too long.I plugged in the OBD and it states PO340 and PO335. My question is, wich sensor do I START WITH? This one or the one under the engine? Thank you for the input.
Subscribed, thank you so much for the video. I have to do this tomorrow morning.
Thank you! Also You’re welcome! I’m glad you found it useful! It’s a really easy fix 👍🏻 let me know if you have any questions!
Fairlady LindZ I finished installing it right now. Had to reset the ecu to eliminate the check engine light. I used the Delphi ss10818 sensor. The car is running like new now. Thank you so much for your help.
You’re welcome! I’m glad I was able to help you!
Thank you!
You’re welcome!
My 04 started running this code recently. I’ve been reading tons of forums and p0340 stuff, I’m going to try this method clear my code replace and start. This seems like the cheaper easier fix. The forums for this code gets pretty deep and pricey if that doesn’t fix it. My car starts just after 1st start it’s rough and sometimes will die in idle!? You think this will fix my problem!? Help!!
Everywhere I look says bank one is driver side but you say it passenger side? Not sure witch one to change
Nice video
Thank for the video bro. I'll use this for my g.
Glad I could help you man! Let me know if you have any questions
Heyy, my Z is 05 model and my bank 2 is not working but then also im driving it, i got the parts now, I want to change the bank 2 but it's little hard to do that, my hands are not able to reach up to that. so what to do in that case, I don't want to go to Pep boys and wanna pay 400$ for it. Any Suggestion. Appreciated .
Thank you, i'll order the piece
Did ya fix it? Lol
What extension size is that ? I’m having trouble finding the right one
thank you so much man mine currently keeps going into limp mode & now it's not even turning over gonna replace mine tomorrow!
Glad I could help you out!
@@FairladySuZie vid was so helpful I can’t thank you enough, grabbed my new sensor today & she’s all up & running now no more limp mode too! :)
Glad to hear it!
Does this apply to Nissan Stagea 02 models?
I have a 2005 350Z doing the same thing, what year is your 350Z?
Thanks bro
Glad I could help you out man! ✌🏽
Thanks
I replaced my camshaft sensor but still have the same problem I think is a fuse you know ware the fuse is located for the camshaft sensor
I love that steering wheel where u get that
I have spares of both sensors. Good thing I rewatched it almost put the wrong one in😂
Glad you didn’t! Lol I’m not sure if it would even let you due to the bolt holes
Hey I replaced sensor 1 and after replacing my car started with little issues but it went into limp mode, any idea on how to fix that?
I would start with getting it scanned at autozone and go from there. It’s possible the sensor was installed wrong? I can’t say for sure though
The links dont work for the parts (dead links). I am wondering why some replacements are 30$ total for both sensors but others are $80-$160 for just one sensor?!? I don't want to get some cheap part and have it break/stop working 15 miles down the road but I also dont want to pay out the wazoo for something that is OEM. Any suggestion on great aftermarket parts dealer? thanks again for the tutorial!!! Great job!
Ik I’m to year late but for future reference always buy oem when it comes to sensors and stuff like that
My sensor won't stay in the connector. The connector snaps but the sensor is not locked in and can be pulled out easily. Anyone else have this issue?
Hey do you think that you could give me a link to where you can buy a plastic bank one sensor for my 2004 350Z? I already tried replacing it once before but with a metal sensor and it rejected it. Thank you.
I would just check out autozone! That’s where I got mine
Wheres the camshaft sensor on Malibu eco 2013
I changed bank 2 n didnt discinnect battery, was lil hard to change
What’s bank two the driver side?
What year is your Z? And will it work on 05-06 with the rev up ?
Mine is an 05, and this video should still apply to the rev up!
is sensor A always on the left
I was thinking of getting that same kinetic manifold. What’s your take on it ?
I would say the plenum spacer, it’s cheaper and you get the same results lol
I have an 03 G35 coupe and I swapped out the camshaft position sensor and the car still has a hard start and the SES, Slip, and VDC lights are all still on. Any idea what's wrong with the car? I already bought 2 camshaft position sensors and none of them fixed the issue. Thanks
Maybe its an oxygen or lambda sensor as the power may be lacking as the right fuel mixture isn't achieved so its lagging and may give power sometimes and lack other times.
Did this problem ever get fixed?
did you clear error after replacing the sensor or just started the car and it went away?
Unhook the battery for 10 minutes, then hook it back up and it should have cleared itself
Would it be these same sensors if your car has the stalling symptoms but when you scan with a scan toll no codes show up?
It’s possible, but there would be a code if the sensor was bad
When the crank sensor in my Frontier failed it didn't set a code initially, it would just stall when it got up to temp and wouldn't start again until it cooled down. Seems like the VQ engines are notorious for failing crank and cam sensors
DaBrute thank you this puts me at ease. I ended up getting the crank sensor and the cam sensors.
Yeah unfortunately cam sensor failure is a common issue, thankfully it’s a quick and easy fix though!
How did you remove the engine cover and strut bar.
You don’t need to in order to replace the sensors!
What exhaust? That start sounded nice
Exotic speed tru dual exhaust
I did on mine but I didn’t disconnect the battery and the car still gives the same problem u think I fucked it up ?
Yeah disconnecting the battery will reset the code. If it comes back on after clearing it that way then there’s still an issue somewhere
I got a code P0340 for my G35. I recently changed the sensor and when i start it, it still takes more than usual to start up and the check engine light is still on. Any idea on why this might be?
I would scan the code again and see if it’s the same code. If it’s the same code as last time then you got a bad part. If it’s a different code it’s more than likely the camshaft position sensor on the other side!
What year is your G35? I don't know if the G's come with a rev up motor like the 05 and 06 Z's come.
How the generic advance auto parts sensor holding up? Still no issue? Also, What year is your Z?
No issues at all, and my Z is a 2005 DE
@@FairladySuZie I think your Z is the same as mine 06 man. Did you check if you motor has 2 or 4 sensors in the back? Mine has 4
Nope 05’s didn’t have the rev up engine, unless it was the anniversary edition model. Mines a base. But I also know it’s a DE because the metal plate in the engine bay with my VIN says “DE”
@@FairladySuZie good to know that only the 05 anniversary edition that comes with a rev up motor. Thank you!
Replaced both on the car and also the crank sensor still a long start noticed my crank sensor adaptor wasn't plugged in but once plugged in just will crank no turn over when unplugged it turns over but a long start . Plz help
Is it throwing any codes?
Fairlady LindZ , it's throwing codes for o2 sensor. Bank 1&2
I would suggest replacing the o2 sensor and go from there!
Fairlady LindZ, Thank you I will keep you updated
My connector seems to be green. Am I seeing the same connector? My Z is a 2006.
Same here
How do I know if it's Left Bank or right bank I got a P0340 code
When you scan the code it’ll say the code and either bank 1 or bank 2. Bank 1 is the passenger
If you have a rev up motor like my 06 350z, you have 4 sensors. Looks like the p0340 code is the straight angle sensor.
👍👍
Where did you buy the sensor?
Ordered it on advanced auto parts website then picked it up! I put the link in the description!
Is this the same way for the 2008 nissan 350z ?
I’m not sure to be honest, I know the 07-08 has the HR engine in it. Easiest thing to do would be to look in the same place and see! I can’t imagine they would move it to a different spot!
Fairlady LindZ yep thanks i will to that tonight also do you its bad to drive with it like that my z starts up fine and drives fine till the afternoon than will sometime stall on me also sometimes has some idling issues thanks for any help
It’s best to not drive it if you can help it!
Please make sure to mention the year model and make of whatever car you are working on in your future videos.
I’m pretty sure all 350z’s have pretty much the same layout so that wasn’t necessary here
Can this cause my z not to start
Yes this can cause your z to not start. If it’s bad what will happen is your car will turn over but it won’t start. But scan the code just to be sure!
Victor Hugo did you get it started
It seem like it has oil is that normal
Yep very normal!
Car cranks fine but stalls randomly and engine makes a ugly sound’saids cam shaft sensor bank 1/$78ea
What year is your car
2005
Good job...now call your local Nissan stealership and ask them how much to replace it
My guess? Around 250-300 lol
@@FairladySuZie I called my local shop and they said the intake plenum had to be removed and all gaskets had to be replaced too. It was $625 after parts and labor. You saved yourself from getting ripped off. You got a bright future ahead of you kid. Keep it going strong 👍
Oooh yeah they were def trying to bullshit you lol glad you didn’t go through with that! And thanks I appreciate the kind words, I sold the 350z a couple years back and I just recently got my 370Z so that’s why I haven’t posted in awhile. If you aren’t subbed def do it you want to see more tutorials I have planned for the new Z
@@FairladySuZie yep 370z is a definite winner. Take care bro ✌
What year was the car? I have a 04
Mine was an 05
@@FairladySuZie bet it’s the same engine then
If I remember correctly up to 05 it had the DE engine, 06 had the RevUp, and 07+ had the HR
@@FairladySuZie yeah
Change mine and still hard start
Did the check engine light go away?
Phine Parcon same here. What was your issue?
My passenger side is the other side lol
This does look easy to do. However im a girl lol
I found my parts at amazon how much do you think this job will cost. The person who sold me the car did tell me i had a sensor. Get that fixed n my will car run better. I Start my new job soon im so nervous to drive anywhere. Until I get money. Please give me sum advice. Also I dont know the code but reading oxygen sensor as well. I just cant lose this car. Im biting my nails.
The ease of the job depends on the car you’re working on. If it’s for a 350Z like in the video then it will be as easy as it looks. However if it is for another car then I can’t say how easy or hard it will be. But if you do it yourself the cost will only be the price of the sensor. Which was around $120 for both sensors for me. If you’re getting a code for an O2 sensor then this video isn’t for that!
I suggest you don’t get them from amazon I got mines from their and they lasted about a week
This is great but it's way harder if you have the kinetix intake manifold. Have spent 5 hours trying, lost 2 sockets, 2 bolts. Still haven't put it in yet. God i hate modern engines
Im about to do all three sensor. The driver side sensor seems like a pain. Good job. Ew subn
Honestly the driver side isn’t to bad, the throttle body kind of gets in the way but it’s nothing to difficult. If needed you can always take off the throttle body and intake! Should make it waaay easier. And thank you for subscribing I appreciate it!
I changed the passenger side camshaft sensor bank 1 and still have the same issue. What could be the problem
Faith Collins did you find out? Im having the same issue
It could be the other sensor (the green one right next to it)