As far as the door panels go, I’d recommend dying them with the duplicolor kit. I did em and the arm rest on my 88 which are the same ones as your car and, they look brand new. I can dm you the before and after a on Instagram if you’d like.
Doing over a convertible right now . My driver seat not looking so good at 130k . Think I'm going to do this . Only thing is I will have to match rear seats . I did this in a fox body years ago but camaro has less options for covers.
Its amazing how much a nice set of seats and a good steering wheel and driving position enhances the whole driving experience. How is the new engine settling in? Have you given her any good pulls yet? It sounds awesome even low down just driving.
Oh yea these seats made a huge difference, I actually want to drive the car now😂. Haven’t done any pulls yet, just torquey low rpm partial throttle stuff. It goes for tuning this saturday.
Seats look great! I'm curious how you fit with your helmet? I think those are a low profile model that is supposed to give you a bit more head room over stock? What is your opinion on these for autocross or open track days? Will they keep you in place?
I haven’t tried with the helmet yet but they really don’t feel much taller than the old ones. They feel like they’ll hold you in really well, so I’d recommend then for track days. I mean sports cars today come with similar seats like the zl1’s with heavy side bolstering and they hold great on the track.
How tall are you. I'm just getting into camaros and my big problem with my other track cars is I'm 6-2 so when I have a helmet on I don't fit in anything. Would appreciate your input.
I’m using an 8 point cage minus the side bars, so I guess technically I have 6 points still. I never had an issue though. Only thing they complained about was my loose seat track...
When are you going to do more trans am content? I’m jw, because I got the exact same model and year. But mine is factory stock with a Quadra jet carbed 305.
I really want to get back on it in a few weeks. I’m just wrapping up a few interior things on the Camaro, then I really wanna get that thing teared apart.
Seating position will definitely change how you perceive driving. I've passed a car I wanted because of how the seats were positioned without the correct adjustments available.
Hey man i really like your content, but i have a quick suggestion.. And that would be volume equalization. I watch most of your videos in my truck on lunch, and when you do a silent clip where you add in some music, the volume of the music vs your voice is way off sometimes. I'll have my radio turned up just loud enough to hear you talk, but then when music kicks in, since the sound clip is louder it makes my subwoofers hit hard and i have to scramble to turn it down real quick lol. Not sure if its just me, possibly the guys watching with headphones too?
I’ve been fighting this issue for a while. It seems when I export it the volume tends to get louder on the music parts. I’m fed up with final cut and might try adobe!
Ik it might be personal and you might not want to but itd be cool if you did a how much money you have into the car so far video and sorta break it down
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Link to my new and old seats are in the description along with the 3rd gen specific sliders!
Don't let this project sit too long. Keep working on your Dad to keep moving forward. Looking forward to updates.
The ribs on the seats match the ribs on the inside of the door SO well!
Cool Matt! I just uploaded my seat video installing 5th gen seats... love those Corbeau seats! Great work as always!
The seats look good and she sounds great. Beautiful car.
That's nice how they bolt right up to the stock mounting location! Cool seats.
the seats look great. they fit the camaro styling perfect
Beautiful seats, they have been on my radar for a future project as well.
Awesome video. Exactly the information I was looking for. Also, I love your car
As far as the door panels go, I’d recommend dying them with the duplicolor kit. I did em and the arm rest on my 88 which are the same ones as your car and, they look brand new. I can dm you the before and after a on Instagram if you’d like.
Wow! Love the way the seats fit and look.
Just curious - do the seat belts rub your neck when you routed them through the harness slots?
I did it!!! Today I bought a 91 RS t-tops needs lifters and some other things .. and I can start moding ..
Doing over a convertible right now . My driver seat not looking so good at 130k . Think I'm going to do this . Only thing is I will have to match rear seats . I did this in a fox body years ago but camaro has less options for covers.
Looks awesome perfect, the fact it's a street car monster you want it civilised inside, will definitely benefit more interior luxury bits. 😎💪
Its amazing how much a nice set of seats and a good steering wheel and driving position enhances the whole driving experience.
How is the new engine settling in? Have you given her any good pulls yet? It sounds awesome even low down just driving.
Oh yea these seats made a huge difference, I actually want to drive the car now😂. Haven’t done any pulls yet, just torquey low rpm partial throttle stuff. It goes for tuning this saturday.
Can you do a video on how you got the stock seatbelts through? I tried and maybe I'm doing wrong, but cannot fit.
You did the headliner!
Loving the content. Still waiting for your next big project tho
That a Cavalier steering wheel?
Get the same door panels, in black the pattern already matches seats.
nice mod love the seats what's that steering wheel out of ?
I have late 90s J-body seat belt receivers in my T/A, they are shorter than those 4th gen receivers
What's your opinion on the seats after a few years
Could you put the Holley monitor in the actual dash, or maybe in the center console???
That’s awesome how them seat tracks bolt right up
Blue pinstrip lining on the seats would be a killer maybe the doors too!
Damn, that E brake handle like a early morning hard on, dude adjust your cables.
😂😂😂
I adjusted it so many times already and it always ends up like that. That pbr spring parking brake mechanism is pure shat...
How much you want for the steering wheel??
Very cool. Can you use the rear seat buckles for the front or are they too short?
I thought about it but haven’t tried it.
@@lsxmatt they might be too short but how far forward do the desserts need to be? Not like you have a back seat
would these be good for long drives?
How about how did you make the cup holder?
Seats look great! I'm curious how you fit with your helmet? I think those are a low profile model that is supposed to give you a bit more head room over stock? What is your opinion on these for autocross or open track days? Will they keep you in place?
I haven’t tried with the helmet yet but they really don’t feel much taller than the old ones. They feel like they’ll hold you in really well, so I’d recommend then for track days. I mean sports cars today come with similar seats like the zl1’s with heavy side bolstering and they hold great on the track.
Thank you for this, now I know what to get for mine!
Every time I see that steering wheel in your videos I automatically think 90’s Cavalier.
Mine have been an absolute nightmare to get in. The brackets seem like the fit the floor studs like absolute dog shit
How tall are you. I'm just getting into camaros and my big problem with my other track cars is I'm 6-2 so when I have a helmet on I don't fit in anything. Would appreciate your input.
I saw a lot of your videos. Can I tell me where you got those door panels for your Camaro
They came out of a 92 rs roller I used for body parts.
Do the new seat allow you to wear a helmet? (With out touching the headliner ). Will you put the seat brace back in?
Im leaving the brace out now that the seat has no more wiggle to it. I haven’t tried the helmet yet, but I THINK it will be alright...
Any troubles with tech at Atco? I had to do door bars to make a 6 point to run faster than 11.5 et.
I’m using an 8 point cage minus the side bars, so I guess technically I have 6 points still. I never had an issue though. Only thing they complained about was my loose seat track...
Hey man, how tall are you? Trying to get an idea of what fitment would be for me.
6 foot*
What is that steering wheel out of?
When are you going to do more trans am content? I’m jw, because I got the exact same model and year. But mine is factory stock with a Quadra jet carbed 305.
I really want to get back on it in a few weeks. I’m just wrapping up a few interior things on the Camaro, then I really wanna get that thing teared apart.
I’ve got same seats how you get seatbelt through? Does bottom retractor fit through?
The bottom slipped through. I have 4th gen seatbelts though, I thirdgen belt won’t fit.
LsxMatt ahh make sense ..thanks
Seating position will definitely change how you perceive driving. I've passed a car I wanted because of how the seats were positioned without the correct adjustments available.
They look great!
Did the seats bolt up to factory studs?
With the corbeau sliders yes.
What did you do with the old seats?
Storage for now. Holding onto them for another project.
LsxMatt I got an 84 Camaro sport
They make a low profile high density roll bar padding.
Good to know thanks!
Gen 3 same floor bolt patten as gen2?
Not that I know of. I know nothing about 2nd gens.
Hey man i really like your content, but i have a quick suggestion..
And that would be volume equalization.
I watch most of your videos in my truck on lunch, and when you do a silent clip where you add in some music, the volume of the music vs your voice is way off sometimes. I'll have my radio turned up just loud enough to hear you talk, but then when music kicks in, since the sound clip is louder it makes my subwoofers hit hard and i have to scramble to turn it down real quick lol. Not sure if its just me, possibly the guys watching with headphones too?
I’ve been fighting this issue for a while. It seems when I export it the volume tends to get louder on the music parts. I’m fed up with final cut and might try adobe!
Where’d you get the wheel bro ?
Chevy cavalier I believe....
94 Cavalier
Ik it might be personal and you might not want to but itd be cool if you did a how much money you have into the car so far video and sorta break it down
Great meng
still got the T.A?
Yea, work will be starting very soon!
@@lsxmatt cool bro, can't wait
Hell yeah!
How tall are you?
6 foot
I'll buy your steering wheel
Please don't get one of those ugly steering wheels..The stock one always looks best...
Im gonna be really careful choosing one. There’s a lot of tacky crap out there...
5:33 COVID !! . . . . unsubscribe.
Shhhhh
What did the steering wheel come out of?
They look great!!