The '92 Z28 and I'm sure the other 3rd gen actually had a true cold air intake from the factory. I like how you have K&N filters in there. Lights look great!
Great vid. The third prong on the low beam is to deactivate the fog lights when in high beam mode ! Here in California ( federal also ) the light patrol wants it that way !
On my 89 IROC I took those headlight hold down brackets and modified the bottoms to be flat held in place with some flat (washer flat) rare earth magnets, now with those, the top screws and pressure from the bumper cover they don’t move and it’s way easier to swap lights
Well being the third gen owner with black pockets on the lights I know you should always start by laying a nice soft cloth across there because you're going to drop something in the way your jiggling around up there with parts you're taking the chance of scratching the black. Just an observation for those watching and word of advice from an old 3rd Generation veteran
what's the brand model of these lights...I bought some crystal clear lights with H4 bulbs from an auction and they were complete garbage...barely lit immediately in front of car
Do you have any videos on how to replace a rusted out T top roof? Any hints etc...can't find any, and I am replacing mine:) Thanks! Good vid..I like the idea for my car!
Where exactly did you order these from. I have sent 2 sets back already they say glass lens , but when I get them every thing is plastic. These look great and they are what I'm looking for. It is great to see someone else keeping these 3rd gens alive.
@@eddiesspeedgarage How much brighter are they compared to stock , trying to decide between the ones you ordered or the HID they offer. Just trying to decide if they are worth the extra money. Thanks again for the info, plus they offer the green to match my car which is great.
@@eddiesspeedgarage i just installed some projector headlights they came with some H4 light bulbs with blue tint but for some reason I feel like my headlamp and everything else is getting way too hot any ideas why. do you think If switching to LED bulbs will make a difference? Or can it be a ground connector?
Alejandro heat is a byproduct of light. Some bulb types are worse than others. That being said led light don’t require as much power to make light because it powers a diode not a Filament surrounded buy gas. LED is much cooler.
Chad Daley sorry they won’t. But maybe someone produces them for your car I just never checked. Thanks for watching the video. If I find some I may do an install on my sons car. Thanks for the inspiration!
Very nice job man this makes me wish I kept my 87 IROC Z . I purchased new and regret bselling it after 13 years
The '92 Z28 and I'm sure the other 3rd gen actually had a true cold air intake from the factory. I like how you have K&N filters in there. Lights look great!
Great vid. The third prong on the low beam is to deactivate the fog lights when in high beam mode !
Here in California ( federal also ) the light patrol wants it that way !
Great detail video. I want ‘em for my Camaro. I want to do the halo to the key switch for daylight running lights.
What a beatiful car do you have my friend.
On my 89 IROC I took those headlight hold down brackets and modified the bottoms to be flat held in place with some flat (washer flat) rare earth magnets, now with those, the top screws and pressure from the bumper cover they don’t move and it’s way easier to swap lights
Man that looks great 👍🏾👍🏾👍🏾
Nice job. Very helpful!
Got bless you been trying to find some like this for my sealed beam 89 c3500
Clean af
Nice job!!
Thank you .I was interested in the light upgrade but vid showed brackets to headlight support to core support. My cars front clip was disassembled
Well being the third gen owner with black pockets on the lights I know you should always start by laying a nice soft cloth across there because you're going to drop something in the way your jiggling around up there with parts you're taking the chance of scratching the black. Just an observation for those watching and word of advice from an old 3rd Generation veteran
Sounds good
*I have a 1976 Camaro Rally Sport and recently installed LED Halo headlights and I am never going back!* @camaronado
🔥🔥🔥
Why do these videos never show the light patterns after installed?
where did you get those turn signal units?
what's the brand model of these lights...I bought some crystal clear lights with H4 bulbs from an auction and they were complete garbage...barely lit immediately in front of car
Do you have any videos on how to replace a rusted out T top roof? Any hints etc...can't find any, and I am replacing mine:) Thanks! Good vid..I like the idea for my car!
Vicki I’m sorry I do t have a video for the t tops. But stick around that could be in my future!
So you didnt change any of the actual mainheadlight wiring harness? The extra wiring is just for the halos?
KyleP133 I did have to resin the low beams but the extra wire is for the halos.
I'm needing help we with getting mine to come back on wat should I look at?
man really there’s only two connections the power and the ground for rack light test each one to the battery then go from there
How are these holding up after a year? I know you upgraded the bulb to LED, I mean as far as the halos go.
They are still perfect. Granted I don’t do much night driving or driving period. But I have been caught in the rain and they are holding up just fine.
Looks great. What’s the model number for those lights? Thanks
Img136-w-st1
Where exactly did you order these from. I have sent 2 sets back already they say glass lens , but when I get them every thing is plastic. These look great and they are what I'm looking for. It is great to see someone else keeping these 3rd gens alive.
wraithsrath I got them from octane lighting on eBay. Keep um alive!
@@eddiesspeedgarage How much brighter are they compared to stock , trying to decide between the ones you ordered or the HID they offer. Just trying to decide if they are worth the extra money. Thanks again for the info, plus they offer the green to match my car which is great.
wraithsrath I actually did a video that I put H4 led bulbs in place of the ones that came with it. Big difference!
✌🏾💯
How exactly did you wire it to the ignition did you tap it or how??
Martin G. In the fuse box under the steering wheel there’s a spot that says ignition just plugged it in there.
What is red msd box over the battery?Seen at 4:46....
Ryan B it’s supposed to help get a better spark.
Sorry if i miss it but did have to put a ballast for the h4's
Alejandro Mercado indid not have to use a ballast.
@@eddiesspeedgarage i just installed some projector headlights they came with some H4 light bulbs with blue tint but for some reason I feel like my headlamp and everything else is getting way too hot any ideas why. do you think If switching to LED bulbs will make a difference? Or can it be a ground connector?
Alejandro heat is a byproduct of light. Some bulb types are worse than others. That being said led light don’t require as much power to make light because it powers a diode not a Filament surrounded buy gas. LED is much cooler.
What was the brand name? I found a pair that look identical on octane lighting and was curious if that them.
They are from octane the link is in the discussion
Is each order of headlights with just one?
The unknown I ordered them as a set of 4.
why did you not hook them up to 12 volt via a switch
i did mine like that and run them at car shows nice work
Eddie Dominguez I could I just didn’t want the switch. Wouldn’t be much work to run a jumper the the battery though!
@@eddiesspeedgarage switch to fuse box keep it clean
What lights did you use? (specifics)
Nevermind I found it
Will they work on a 4th gen?
Chad Daley sorry they won’t. But maybe someone produces them for your car I just never checked. Thanks for watching the video. If I find some I may do an install on my sons car. Thanks for the inspiration!
Thanks Ram fan!
@Eddie’sspeedgarage how much was it for all 4 of them
Namontte Grisby 130 I believe
@@eddiesspeedgarage it’s 229 now 🤦🏽♂️
@@eddiesspeedgarage and thanks fir replying man 👍🏽
Oh that’s where you put your MSD box 📦 on yours.
Can you send the link to the type of lights you used and where we can find them?
The link is the second comment on the video. Thanks for watching!
Amazon
Where can I buy halo for my 1994 z24 Chevy
I would say your best bet is to google that or try eBay
Can you post the link for the headlights
William Ortiz done! Did you get a chance to like and subscribe?
hey my 89 is stalling on drive and reverse any ideas
Frisky Bullets iac valve or vacuum leak possibly.
@@eddiesspeedgarage thanks for the reply I'll try a iac than test for some leaks
Ignition control module in the distributor
www.octanelighting.com/product/kit4x6-white-led-plasma-halo-crystal-glass-metal-head-pair-201-60w-blue-1
This is what I was looking for thank you. I will subscribe now
U need to change out the fog out to
mario moreno i did check my video!
Img136-w-st1
Power Rangers
Great detail video. I want ‘em for my Camaro. I want to do the halo to the key switch for daylight running lights.
That’s exactly how I have mine connected