How Spray Bottle Works

A short tutorial on how spray bottle works.

[@robinfox4440]

Bless you, Indian UA-cam tutorial guys. Absolutely no-nonsense, clear, calm, and informative. India's best export in the digital age.

[@q7winq7]

12-1-2022 - - - - Here's the short version: Tube (straw) immersed into liquid. Squeeze trigger compresses a spring against the trigger and contents of cylinder are compressed with a piston. Compressed contents flow past a ball that is pressed against a gasket (o-ring) by spring. Compressed contents ejected through small port in nozzle to the outside air. After trigger released, the spring re-seats the ball against the o-ring blocking reverse flow. Trigger is released and trigger spring forces piston back creating vacuum in the straw sucking more water into the compression chamber of piston. - - - - There, fixed it for you. The sprayer shown in this video doesn't have a spring/ball/o-ring assembly in it. The sprayer in the video is a more simple mechanism. Better sprayers have the ball/spring/o-ring assembly style. Good luck. Don't use bleach in sprayers without rinsing out with water afterwards to wash bleach off of the internal parts - or they will dissolve/rot and leak, making sprayer into junk. (Cheers - ex-engineer).

[@mathewandmarleny]

Totally helped me put back together the empty spray bottle I bought at the store the other day that just feel apart. Thanks!

[@rubenrubinos982]

Thank You For Uploading This Video, Helped me to reassemble my spray bottle. No need to run to the store and buy a new one when this one was repairable and works great once again!

[@RondaHedges]

Thank you for this rather comprehensive tutorial. It has helped me repair 3 sprayers.

[@mgsriramiyer]

Simple, no-nonsense explanation. Good work

[@Shawshank08]

Thank you ! Appreciate it :)

[@diwakarprasad2057]

@@Shawshank08 my contacts no. 9899375937

[@diwakarprasad2057]

I'm interested in trigger spray manufacturers plant

[@georgekahn3313]

Thank you Mr. Singh, your tutorial showed me how to successfully put my sprayer back together. 👍. 🙏

[@spicer41282]

Best video found after viewing 6 others which was just ok.
This one breakdown of parts and clear explanations sets it apart head above the rest! Great work! Too bad you stopped😢 making others.

[@tintinxyz]

A small suggestion.. maybe if u used colored water the flow would have been more visible and the mechanism would have been more appreciable..

[@LuxeLifeVibes632]

BRO, Do more videos. This was an amazing video.

[@Shawshank08]

Thank you! Appreciate your kind words!

[@Tech-Ing]

Placed in a closed bottle, Does it create vacuum or is there air incoming to the bottle for replacing the ejected liquid? (I don't think it creates vacuum, else, at some moment, it would be almost impossible to continue ejecting liquid).

[@diamondaforce]

I’m not 100% sure but I think that if you mean inside the little thing where the spring is, when it empty’s out then since there is empty space the water tries balancing so it goes up. Again I’m not 100% sure

[@Cryslr3Hun]

Hello I really enjoyed watching the mechanics of how the sprayer works. Question, If I have a sprayer that leaks from the nozzle when spraying where would the leak or water be coming from ? Thank You

[@rajasreeg3305]

Very good and simplified scientific explanation..Thanks.

[@Yash-em2qm]

In short .Bernoulli theorem , Pressure volume relation is the key .
Good video..

[@techworld5517]

I like the teaching stick 😂

[@apurvaprajapati9939]

Thanks for the video! It's knowledge. The nozzle is also an interesting part. You could show that in more detail.

[@saibhargavi5721]

Thank u so much today spray bottle is working after following your video

[@fordvockell]

Thanks so much for helping me with a school assignment

[@lpaprocki]

Thank you so much for this!

[@srikarreddy7591]

Did you forget to explain about NRV, which you mentioned in the beginning?

[@rick1891]

Great video! Thanks for your explanation.

[@DarshanSenTheComposer]

4:50-demonetised XD

[@townley1017]

Great video 👍 just what I wanted

[@Edgar4T007]

Great video 👍

[@user-zh6ud6kn6r]

As a sprayer I can confirm that we really work like that

[@Dlktar]

Please continue doing these amazing demonstrations

[@narasimhachopparapu4534]

Thank you for the video. how liquid enters to top of piston initially?

[@ScienceVideo-zf8od]

Thankyou🎉❤

[@kimmywhitt6112]

Thank you!!

[@a1m33frank]

I have one with a ballbearing and soft washer and a small piece of plastic. I bought the amber glass spray bottle from Grove. Could I get assistance with putting this back together? The video was very helpful. Thank you for sharing.

[@kritikamatolia1213]

I'm trying to fix a spray, there is a small glass bead / ball and not sure where it goes in the entire apparatus, could you help?

[@masoodatif]

i fixed my sprayer. thank you

[@tintinxyz]

Also pls spare a mention about the valves.. These are very important in keeping the liquid from flowing back.
Also when the piston expands the cylinder, the liquid is brought into cylinder

[@TechCornerWithAjay]

Exactly related to this I have a doubt. When cylinder expads after spraying water, what is stopping from air to get sucked in due to low pressure instead of water getting sucked up? A value in nozzle?

[@Dalziel45]

@@TechCornerWithAjay A valid concern indeed!

[@cend2362]

the nozzle is one way (air cant come in when trigger is released) because its similar to, for example, a vacuum hose sucking a big object larger than the hose mouth. but in this example, the big object is something inside the nozzle. ​@@TechCornerWithAjay

[@harshstudy488]

Amazing thankyou

[@g0d5m15t4k3]

Thank you!

[@Andi-fk8vs]

Omg this is the only video that WORKED

[@safetyalways7788]

I just bought spray bottle but water is not coming out. Do I need to pierce the nozzle or what?

[@SohilShah_Melodyman]

Nice explanation! Thanks.

[@mayurmalwatkar9754]

Very good explained👌👌👌

[@Shawshank08]

Thanks! Glad you like it!

[@niranjanbhagat9483]

Radhe Vallabh Shree Hari Vansh❤

[@camelCased]

I have another problem. I had a pesticide in the bottle, so I wanted to wash it out. I screwed off the nuzzle, and then while rinsing the bottle, that small inner plastic thingie of the nozzle flew out. I put it back and screwed the cap on but now when I spray, I don't get a mist but just a tiny stream out. Ok, it's "good enough", but it doesn't cover a wide surface anymore, because it sprays to a single point 😀 I tried to turn the cap both ways to adjust but it did not get the mist back. Not sure, what happened - maybe there was one more plastic piece inside that plastic thingie, and I lost it. Wondering if I can find something to replace it.

[@Train115]

Very good video! I learned so much from this, only suggestion I have is to work to improve the camera work a little.

[@zenobiakhan5665]

I've lost tigger bottle nosle, can i use any nosel??

[@generalawareness101]

Is there a way to connect an air pump to any of those pieces so the air that comes out is as fine as the water spray mist was?

[@stone8714]

What would humanity do without Indian youtube?

[@recommendedforyou7957]

well explained. thanks!

[@Shawshank08]

Recommended for you Thank you :) appreciate it.

[@sujalsaffire5896]

Thanks so much
💎❤💎

[@Zoranurai13]

i should be studying but i'm looking up how a spray bottle works...

[@diamondaforce]

Thank you for the video. Could you please explain why the water moves up the pipe though. Is it because there’s empty space in the thing and it tries balancing out? Would liquid be able to do that? And why doesn’t the air escape right away without you spraying. Does the nozzle also open up? I understand if you don’t see this and don’t answer but if anyone has answers please do share

[@sarmankumar59]

I might be wrong, but giving a try. When the presses the plunger/lever/whatever, it pushes the piston in upward direction. By pushing the piston upwards, we increase the pressure and decreases the volume in cylinder. As the one end of cylinder is connected to nozzle, whatever matter (liquid water or air ) is in cylinder runs to nozzle. In nozzle, kinetic energy thus velocity of fluid is increased on the expense of pressure. When we leave the plunger, piston runs back to it's normal position, thus increasing volume and decreases pressure in cylinder fall below the pressure of fluid in the container ( bottle ). As the downward end of cylinder is connected to the bottle through pipe, due to differences in pressure, fluid start moving from high pressure area to low pressure area. Thus we have fluid/water in cylinder.

[@kendallhouse7497]

So the nozzle does not necessarily need to be perpendicular to the vertical tube. It could be rearranged to spray upward?

[@chromospark3041]

how to get the small ball back in its place.....ball valve such that it works......i think mine got displaced

[@nesc39]

You only have to tell us one time how the volume decreases in the pressure increases. You left out a key part, the one-way valve that prevents the water from going back into the bottle

[@Cambria399]

This could be good but you did not mention the valves. the most imporatant part? maybe. Unless I did not hear you perhaps...does it have check valves or some means to move in one direction? I like the idea of doing this video thank you. also the sound was not easy to understand. Not being mean... just interested in this simple machine.

[@Shawshank08]

Cambria399 My apologies. I forgot to explain the function of valves. And as for the sound, may be it's my accent or the white noise in background. I'll try to improve in my next video.

[@Cambria399]

Cheers mate, I gave thumbs up :)

[@bhumikadugad4021]

@@Shawshank08 could you explain the valves function right now through words itself , i need to understand that urgently

[@akshayaapspk4940]

Thank you😊😊

[@rohitsharma-il8xn]

Good information just working old spary bottle works like new

[@sarthaksingh6595]

Thank you for this informative insight

[@Shawshank08]

Glad you found it useful!

[@simranjoharle4220]

How does the water rise up the very first time?

[@thybiscuit]

venturi effect

[@ib5661]

@@thybiscuit thank's for explanation

[@mokshilshah2927]

Great explanation 👍👍

[@masoomakhanam8146]

Good explanation 👍🏻👍🏻👍🏻

[@TheMsOfficialMe]

Can you explain how the flairsol works

[@karthiksukumaran85]

that was very good explanation

[@Shawshank08]

Karthik Sukumaran Glad you liked it :)

[@samric2000]

thank you

[@arckrz721]

What is the equation that describes or governs the transformation of potential energy into kinetic?

[@guest2007]

1 mar 2021 9:53 am est(utc-5): law-of-conservation-energy/law-of-energy-eternality : kinetic-energy = potential-energy. 1/2 x mass x (speed)^2 = mass x gravity-acceleration-speed x altitude ?

[@wenaavendano4749]

Please share your new video how to fix hi pressure bottle. spray

[@shubh.jain1990]

hello, my spray bottle is working opposite...i dont know what happend to it ? can we solve this ?

[@lilfiremonster3903]

Can you make this in any other material besides plastic?

[@atikmansoori1]

Sir could you transform this nozzle into automatic spray

[@mamtapandey3547]

Well explained👍👍👌🏻

[@pzk5099]

Please let me know how have u opened the parts

[@pzk5099]

I m not able to separate cap and the piston

[@N.S.Sdanceclub]

Thanks sir helped me alot

[@ummifatihah7394]

Where to buy all this

[@ironmen808]

Can you help design a spray bottle

[@amantedecapaldi4037]

A continuation of video should be making this system a very crude one with readily available stuff around our house .. what say?

[@patronam9396]

Finally found the right video

[@blueandbanana]

Can u pls show us how to take it apart, piece by piece?

[@diogeneslantern18]

Into thin air. Great book. Immensely heartbreaking

[@Shawshank08]

Extremely tragic. Always reminds me of the saying - The Mountain Always Has The Last Word.

[@sathyasathya2898]

super

[@adiliraliyev5882]

Cut it in half? To see wts inside.

[@gabem5635]

3:47

[@calebv5925]

To a shooter am watching this trying to make a mini sprayer to put it in the hand and try to make some web fluid and see how potent it is

[@amumasne8589]

In my spray bottle water not comes through the suction tube... what i can do

[@amumasne8589]

When that tube apply to the other bottle will come....

[@hanfucolorful9656]

damn, you should add red or blue colour water to show better

[@emeraldflame6194]

Times someone with an Indian accent has saved me at school
|
|
\/

[@emeraldflame6194]

I’m Indian btw

[@tanginginamo5814]

How I remove that

[@hanfucolorful9656]

damn, you should add red or blue clour water to show better

[@redredwine1277]

Thank you for info 🌸🌼🌺

[@saluto1397]

You know I did one stupid thing. I put a little compost into the bottle , hoping to bathe my plants in an invigorating spray !! Imagine my pain when the sprayer stopped working. I felt ashamed of my foolishness. I havr failed my plants.. How can i redeem myself ? ( Want to repair it)

[@vratinchauhan2714]

thanks

[@yadvendrarsingh9417]

R u from India

[@2degucitas]

I will refrain from Shawshank Redemption comments.
Oh wait....

[@Shawshank08]

haha! love that movie.

[@Betty9971]

That was awesome!

[@Shawshank08]

thank you! this video was the outcome of a boring weekend. Never thought so many people would appreciate it.

[@guest2007]

1 mar 2021 10 am est(utc-5):thanks

[@yanikkunitsin1466]

Ommited the most important part - check valve

[@bikramnongmaithem1399]

Continuity equation or bernouli principles

[@mehulchouhan5630]

Continuity equation for working of nozzle

[@AshishSharma-ck1sd]

Close the fan.

[@Shawshank08]

haha! wish i could buddy. it was extremely hot and humid the day i shot this

[@imtiyazali917]

Whers the ball bearing. My spray has a ball bearing .

[@factashu6305]

Bhai hindi mein samja dete

[@ebicosmetic787]

We have many different nozzle heads.

[@paulettelewis2926]

Would you be interested in exchanging links?

[@Shawshank08]

I am not sure I understand. This is my channel link - ua-cam.com/channels/7kAOjH9JPW71fS_hiWSofg.html?view_as=subscriber
If you liked this video please hit subscribe!!

[@biggus6633]

How about exchanging phone numbers, toots? Woo! Woo!

[@sandhyadas2916]

Hey brother , are you active ?
We need more videos.

[@Shawshank08]

Thank you! Appreciate the feedback. I'll try to upload more videos in my spare time.