Це відео не доступне.
Перепрошуємо.
How I Repaired My Sanitizer Spray Bottle & Fixed it Twice !!
Вставка
- Опубліковано 14 сер 2024
- This is made inspired from the short video • Sanitizer | Spray Bott...
Recorded by : / @lovaharsha5080
Thumbnail: Used A.I. based image processing tool to convert real world image into cartoon.
0:00 Taking apart the bottle
0:14 Removing the Nozzle Cap
0:55 Opening the Bottle
1:10 Dismantling the Nozzle Assemble
1:45 Sperical Ball inside the pump setup !
1:57 The Nozzle Parts
2:32 All Parts of the Bottle
3:00 Replace, Clean the parts.
3:05 Joining all of the Parts
3:10 Nozzle Parts Assemble
3:33 Pump Parts Assemble
3:45 Inserting the Nozzle into Pumping Part
3:55 Joining the Nozzle with pipe.
4:10 Inserting the Internal Assemble into bottle Neck Cap
4:35 Closing the Bottle
4:50 Fitting the Nozzle Cap on to Nozzle
5:00 Testing the Spray Bottle
5:20 Success Party
Recently my sanitizer bottle stopped working as it fell down.
I opened up to fix it...
I found there is a small spherical ball inside the mechanism which is crucial for the spray to get worked.
That spherical ball has a spring on it and due to fall impact, that spring contact got lost..
so I had to open the mechanism entirely and carefully place the spring on that spherical ball.
check out how the spray assembly works.
Just put a needle through the hole where the little bead was. That is the end where the straw was attached. Test it out and see if it is started spraying. I did it and it worked out for me. Did not have to open the when thing. Thank you for the video 😊
Thank you so much... this way was so much easier and less complicated.
I tried this just now and it works for me too, thanks for the tip!
@Ad k it worked for me thanks for the tip 😊😊
It worked for me too! thanks
it works, thanks so much!!
I had never noticed the tiny ball! It was stuck, and even hot water didn't release it. But a shot of WD40 worked! Thank you for this video!
Thank you, because your comment I decided to stick a needle to loosen up the little bead, and it worked.
Seeing how the mechanism works was helpful. I can't take mine apart, the can is pressurized, and now I know the hollow tube that's broken on the outside, can't be pulled out from the outside and replaced. So I'm gonna have to Macgyver something to make it spray again. The can is 3/4 full!
Thanks it worked
Thankyou soooo much ❤️❤️❤️❤️❤️ i cried when i broke my mom's bottle but now she is not angry ❤️❤️❤️❤️
This is insane I just lost that specifically shape transparent ball and find it and fixed that bottle thanx for uploading videos
Glad it's helping
I also lost the small ball
I didn't even have to take it apart to your extent and it worked like a dream again. Thank you so much ❤️🙏
how would you take it apart?
@@loananzouakou4673 if you watch the whole video, she did show how x
*Try to repair yourself first* , before buying new. It's plastic. Reuse. Save environment.
*Yes, removing nozzle is hard.* Removing it went off the camera frame. Use a plier.
Share & Save someone's life ❤️ only if you find it helpful.
Clearly, some of you facing hard time removing the nozzle. Please be careful with this part because if you remove it harshly, there could be a transparent Spherical Ball drops off the nozzle assembly.
If you lost the spherical ball, try any tiny round piece of pebble or ball bearings of more or less same size.
Thank you so much
Make that missing part
If the ball is Missing then what to do pls make a video
Yes, I'm having a hard time on removing the nozzle and til now, I'm still there AHAHAHAHAHHA
@@b06cristobalchristianp.56 Same
My friend, Mr. Raghavendra (Handsome guy) got an same issue. We saw your video luckily and we did dismantle and assembled all parts. Respect 100%. Mission passed 100%. LOL..Its working fine now..
Thanks for Raghav hard work and love towards UA-cam. 😍
WOW! THIS WORKS, I THOUGHT I HAD TO BUY A NEW ONE BUT KNOWING ME I’D FIND A WAY TO FIX IT. IT SPRAYS MORE MIST NOW! I’M LIKING THIS VIDEO!
Bt wht if it again don't work ??
The thing is i m unable to attach the pipe part in the main cap its so hard😐😢
Thank you for this video. My bottle got knocked off of the counter and landed right on the nozzle without the cap on, and it wouldn’t work. It saved me from having to buy another product when this bottle was already full.
THANKS A LOT MAN!
I WAS STRUGGLING WITH THE NOZZLE SETUP.
I HAVE NEVER FOUND A UA-cam VIDEO THIS HELPFUL THIS WHOLE WEEK.
Glad it helped
My two nozzles does not have in that little ball and they won’t work at all. Liquid is being pulled up but it isn’t getting to the actual nozzle to spray out. Nice video though, it is the only one that gave me hope.😂
Same did it work in the end for you
I was very happy I could find a tutorial like this! But unfortunately, it didn't work :( even using a plier I couldn't remove the nozzle... I'm definitely substituting my spray
Same
Thankyou it's really work for me
Glad to hear that
We got the exact same bottle this will 100% work
Thank you so much for this information. I didn't know you could take the whole nozzle apart and put it back together as you did. Very helpful.
Glad I could help!
I fix my shoe spry bottel with the help of your instructions....
Thank u
That's great!
@Manohar plz help me
I cannot remove the nozzle .please tell how to do it
Same even I'm unable to remove the nozzle
Even I am unable to remove the nozzle...even in video it was skipped
I wonder if comments are or not genuine
I was about to throw away 2 bottles as the pump was not working, then found this video and yippee it worked.
It's such a helpful video 👍👍
Make the missing part
How to fix my spray bottle that gives out big drops instead of really small ones? I lost the small part that make the drops small. Please answer if you know what i mean
Thank you so much for this lovely hack! I couldn't remove the pump system but tried blowing on either ends of the pump assuming an air blockage and hola it worked! Thank you thank you thank you so much and thank God for everything!! 😊👍🏼
Can u pls tell me how to remove tht main part ..its so hard :(
That's the task😭
I just took off the hose and added a drop silicone to the nozzle it is attached to. I just went ahead and did it to every bottle I have. It works! Yippee!
You are awesome 😎
you saved my life
Thank you for the very helpful video! I fixed the spray nozzle on my GLASS bottle! Yay!!!
How the hell do I remove the set 😖 I even tried to get it out with a cutting pair 😩 still that was stuck tho. Plss help
Same with me
The pipe is falling into the bottle when i pump it it doesn't stay in place should i stick it with feviquick or what should I do please tell me
i am not able to remove the parts
Ano po remedyo pag wla yung panang bola na tranparent.????
Ahh 3:00 AM content 🙂
I am unable to remove nozzle
Thanks for helping
Bhai thank you mummy ki chapal se bacha liyaa yrr bhai love you se tane❤️👍🏻
Bhai nozzle nikal hi nahi raha 😰😢😖😖
but if the end where pipe connect is broker or split if also doesn't wort in that case you have to seal that area .
It gives some confidence because of own repair,may be it is small prob.thanku for this video.
i cant fix that bottom to that pipe i triad so mamy times what i can do now??
It's working. Thanks much.
For me the cap would not spring back up no matter what I'd do.
In my case the plastic disk holding the whole assembly on top of the bottle became super soft (for some reason) and the whole thing just slipped through it.
Meaning when I pressed on the cap, the whole thing just came down and wouldn't go back up.
I took out the plastic disk with the hole in it, and cut out a similar disk from an old credit card, then with a drill and a knife I made a similar hole in it.
Pushed that janky disk with a lot of force back onto the nozzle assembly and when the bottle is screwed on, it actually holds it in place and the nozzle doesn't slip through.
Now the nozzle springs back up and its working again.
Will definitely try after school my conditioning bottle suddenly stopped spraying
My sanitizer spray bottle is not fixed, it looks like other bottles instead of the original ones.
You have made a simple but useful Video on the subject. Also I like the animation as well. Good job. Keep it up.
Thank You 🙂
Oohooo. You skipped how to remove pumping part ..... Uff it's tooo much important... And now ... We are not do it 🙂
So glad that u made this video
Saved my day
Thanks
this was helpful...i found out my spray bottle doesn't have the black rubber but has a lock to keep the nozzle and spring in place....i had to remove it bcoz it was too thick that prevents the spray from sucking water... thanks !
Can u please explain wht to do, if that black rubber is not there
@@harshitha8088 my bottle has a different design, i did not have the black rubber but in its place is a lock(white in color)... if you need a black rubber you have to find a something to take its place.or maybe your bottle is like mine.. disassemble it and find eahc piece that matches the one in the video. i figured out i do not need the lock(black rubber) after all
It works ..thanks
What to do if I misplaced the spherical ball :(
Try to use tiny steel ball bearings, probably available at bike workshops.. that bearing ball is crucial and I almost lost it twice... it's transperancy is main problem.
@@BabjiEManohar but there was no spherical ball in my bottle. Is that possible?
@@narendrachavda6790 I'm not sure if that is possible. In my spray bottle, it is transparent Spherical Ball and I lost it while opening the nozzle assembly. So .. you have to check with product.. and it's assembly.
Superb. Thank you so much.
Thanks for the information,maza a gaya bro, ab new bottle kharidna nahi padegi❤🎉
How to removing the set up
how to fix Makeup fixer bottle please make a video on it
Thank you
Pipe on 4.22 is not stucking inside that how to stuch that please tell me
Please telll me
Thank you fir this video
Easier way… fixed mine by removing the nozzle then the pipe, and then put the rest in hot water then it worked for me 🎉 pump it a couple times in the hot water good as new
I usually don't comment on anyone's video but i loved your video .. helped me a lot Thank you so much ❤️🙏
Thanks a lot
@@BabjiEManohar Welcome Buddy !
Wah bhai wah moj kardi
I hope it's helpful
Really awesome video.. I never notice the tiny ball. When spray bottle stuck I removed all parts of spray bottle but I didn't notice the tiny ball.. I think I have lossed it..after fix all parts without tiny ball it's didn't spray..after saw ur video I noticed tiny ball is missing now I fix using another tiny ball in spray bottle now it's spraying.. Thank you for sharing this video
Is this a spray sanitizer bottle? I have same!
Wonderful, I did nothing jut remove the parts and cleaned it and it works .Thank you so much..
Wow. Kudos. I just was doing 1 step wrong again and again. Anyways thanks a ton. Superb
I broke my father's spray ,i see your video and fit them.thankyou
I'm happy for you 😊 well done ✅
Same here
Good it's very useful
My head strong bottle wouldn't work despite my hardwork and time invested.
It's all right, buy a non spray bottle and use it...
How to remove nozzle it's not removing...??
Mene apni same bottle ulti kari, thodi der tak nozzle ko daba k rakha, uska air nikal gaya, fir button dabay dabay bottle ko seedha kia fir jaldi jaldi nozzle dabaya 2 4 baar to pressure ban gaya and sab thik ho gaya
@@ankitkhandelwal426 aapka method work kia but sirf 4 5 minute ke lia .
Aur ab ye work nhi kar rha .
What should I do.
Please reply.
This was so easy and help full thanks
Thanks bro my mother is so happy
Thank you very much
By seeing your video I repaired my sanitizer spray bottle.
So which part gets broken?
My spray nozzle won’t spray. The mechanism is fine. I have another spray bottle I took the first cap off (it doesn’t fit the top but it allowed me to test. It’s just the cap part that’s clogged. I’m soaking in hot water. Idk how to get it to work. I’m trying but it’s like it’s stuck.
Thanks brother...
It works
Can i re use sanitizer bottle to fill my homemade serum is it safe
Thankyou sir
It's working
Wow most wanted video thanks
Mera to jo sahi tha wo bhi kharab kar diya jo kharab tha wo to kharab hi raha, but good video , i still enjoyed the process at 2:00am😜
Very very right👍
Same mere sath bhi hua h bro
2.45 am 🤣
Wow Thanks yrr
i just done it today....and it’s work....thanks
Yes... It works... Thankyou
Thank you so much🤝
I am able to join but it's not working... Can u tell me how to fix???
Mene apni same bottle ulti kari, thodi der tak nozzle ko daba k rakha, uska air nikal gaya, fir button dabay dabay bottle ko seedha kia fir jaldi jaldi nozzle dabaya 2 4 baar to pressure ban gaya and sab thik ho gaya
Jo part sbse upr h usme holl hi nhi hai usse kse fix kru
Hii I took apart the perfume spray nozzle and put it in another bottle but now it pumps inside the bottle and it won't work. Help me
Some sprays use different Mechanism to pump like high pressure inside the bottle. The nozzle cap will be sealed carefully to not release the inside pressure. You might have leaked out the pressure inside the bottle. I'm guessing that the product is beyond repair. Can you share links for this product, will check if can suggest you to do something about it?
@@BabjiEManohar thanks for reply. Yeah I was stupid trying to fix that. You're right it was from the pressure that spray was working and since I broke it it's beyond repair so I got new one. Thanks anyway 😊
1:22 how to do this I can't able remove this please anyone help me
Thanks dude it helped me...👍👍👍
Glad it helped
Thank you so much
Helped me a lot
Amazing video really helpful...😍😘❤️
Glad it's helping
I dint find any boll inside. After fixing as u said its not working still.
Thank you so much!
Omg….it’s really hard to remove nozzle😨
Yeah
Thankuhh somch ❤️ this video is very helpful 😉
Can you tell what to do if that little black circle is missing?
What do we call it?
TQ for vedio
That's hell lot of HELPFUL ❤️❤️ BIG THUMBS UP
Nice video
Thanks
Thank you very much bro ❤🤩
I am unable to remove the spring, what can I do?
Hi how do you clean a spray bottle that have perfume on it, i cleaned it alot of times so my budgie would take a bath, but im scared that theres still perfume smell and i dont want them to die
I have no idea.
Nozzle kese remove kre...plzz bata dijiye..plzzzz🙏🙏🙏🙏🙏
Same problem
Thanks for sharing 😊
Really its works, thanku