Mix SILICONE And SOLVENT And You Will Be Amazed At The RESULT! Few Know This Method

Few people know this method! A great silicone trick that only professionals use. If you have clear silicone, mix it with solvent. You will be surprised! The best permanent coating will be ready from 2 products. You can apply it to plasterboard, slate, cardboard and wood. As a result, you get a waterproof coating.
#silicone #solvent #diy #top #handmade

[@user-ed9gl1dy3f]

Два года назат промазал таким раствором углы с уличной строны, где постоянно льёт дождь. Теперь с внутренней стороны балкона отсутствуют сырые места. Раствор просто потрясающий. Не шелушиться и не оьваливается, т.к. пропитка проникающая. Срок хранения в бутылке неограничен. С приветом из Туркменистана.

[@user-ro4bg1lo6x]

Это где же в Туркмении постоянно льет дождь? 40 лет прожил в Небт_Даге и дождя ждали как праздника!

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Turkmenistan! Thank you

[@user-ed9gl1dy3f]

@@user-ro4bg1lo6x весной и осенью. С северной стороны расположен балкон. И Туркменбаши не Небит- Даг

[@user-ed9gl1dy3f]

@@user-ro4bg1lo6x Туркменбаши не Небит Даг. Разные климатических зоны. Весной и осенью идут дожди.

[@user-ro4bg1lo6x]

@@user-ed9gl1dy3f Ну если идет дождик то в Туркмении это благо, хотя по памяти,, то частенько бывал в Красноводске и ни разу не попадал под дождь! Не везло

[@wolfgangschroter2093]

Solve silicone in univeral thinner as much as it takes, add 10% of this to an outdoor paint. So it will be a good weather protection for many materials.
Btw, i am from germany.

[@inprogress.]

Great idea thanks for giving me a new idea! I'm happy to have you watch my videos in Germany! Thank you

[@nothankyou5524]

By the way, I am not.

[@robertoc.abrahao8119]

@@nothankyou5524 , fica em paz.

[@wolfgangkranek376]

Only do this in a good ventilated room or outdoors.
And be aware of the fire hazard (ie. dont smoke while doing this, and no open flames).

[@chuckp_again_and_again]

should work with oil based paints...but not water based paints.

[@johnh7500]

It is an old trick which, among other things, is very useful in waterproofing tile joints. The solvent for the silicone should be alcohol based. It can be plain alcohol or something similar like isopropyl alcohol.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@nothankyou5524]

Plain alcohol??? Ok...

[@garygates5679]

THANK YOU..!!!!

[@NikVik-wm9hh]

Если это использовать в ванной комнате, на силиконе заведется плесень!

[@MARDECEL]

​@@NikVik-wm9hhDEPENDE DO PAÍS, MOFO É FALTA DE LIMPEZA E MANUTENÇÃO....
SUGIRO COLOCAR SILICONE ANTI MOFO

[@surensaribekyan738]

Всегда нравится любая идея, люди думающие и инициотивные!!! Спасибо!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-iu7ge8my2g]

Спасибо, брат, за качественный ответ настоящего живого и разумного человека

[@user-px4xl8xp6v]

В эту жидкость добавил краски и плохо размешал. Покрасил древко топора ради эксперимента. Сам не ожидал такого эффекта. Несколько лет ручка как новая, легко моется, не набухает после дождя и не рассыхается на солнце, не скользит при работе, красивая, хорошо различима в траве, на стройке. Но самое главное - приятно держать в руке, благодаря тому, что размешал не до однородности. Мягкая, бархатистая поверхность. Я её называю «резиновая краска».

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@trampacentolla]

Servirá tu solución como revestimiento aislsnte?

[@user-nu4qb4qn8v]

​@@trampacentolla
Да

[@user-fh3zx5sk9d]

А растворитель какой?

[@tskobori]

@@trampacentolla

[@ajdjrjfnd]

Хорошая идея,надо попробовать.
Привет с Сахалина и с Ташкента

[@hugog.guzman2700]

We hail from Puerto Rico 🇵🇷. Saludos. Your idea is great for our balcony banister where people rest their drinks and water circles become unseeming.
Great idea!

[@inprogress.]

I'm happy to have you watch my videos in Puerto Rico! Thank you

[@shadl.6634]

❤Покрыл этим составом автомобиль, уже пол года на мойки не езжу, даже номерные знаки на камерах не считываются, идея супер ❤

[@user-yz7yk1lx3q]

Il problema lo troverà se vole verniciare qualsiasi de questi materiali, la vernice sul silicone non attacca

[@user-hz7ug9em6i]

@@user-yz7yk1lx3q Человек пошутил.

[@vladislavboldov6216]

6 лет назад, пропитывал тротуарную плитку этим способом. Очень эффективно.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-jq4lp4zn2y]

До сих пор держится? То есть подходит для наружных работ?

[@AmazingSmart-ngth]

"Wow, I never knew mixing silicone and solvent could create such a fantastic waterproof coating!"

[@takeshilevkovacs645]

На сколько хватает гидрофоба, через какое время перестаёт работать, подскажите?

[@Solomagus]

​@@user-jq4lp4zn2yв принципе должен держаться довольно долго смотря как герметик себя ведёт под лучами ультрафиолета ну и наличие отсутствие физической нагрузки. Ну и какой материал обрабатывается

[@alaatarik3734]

تستحق التجربة
فكرة مذهلة سأحاول تجربتها واختبارها في مواد اخرى والى استخدامات مختلفة
شكرا للمعلومة
من العراق

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@inprogress.]

I'm happy to have you watch my videos in Iraq! Thank you

[@dmitriy.s888]

А у вас дождь бывает ?😂

[@johnhook8062]

I have a machine shed, that Never get wet, aften I have User this trick.

[@ahmetlevent9858]

Çok iyi bir yöntem

[@danielrado]

La idea parece buena. Sin dudas lo probaré. El tema es que hay varios tipos de silicona y varios tipos de solventes, espero atinar con los correctos. Saludos desde Argentina!

[@AdriaFabrega]

El disolvente para la silicona debe tener una base de alcohol. Puede ser alcohol simple o algo similar como alcohol isopropílico.

[@inprogress.]

I'm happy to have you watch my videos in Argentina! Thank you

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-hn3yc5es3m]

Лучший растворитель, бензин для зажигалок.

[@user-lq3uk3xv7i]

6:27

[@user-re1dw4mx3w]

Ставрополь приветствует! Благодарим, будем пробовать!!!

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Stavropol! Thank you

[@amelco4]

Буденновск на связи 😅

[@user-nd6nn6ii2k]

Хорошая идея. Все гениальное- просто!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@Binancetfx]

Solvent nedir ?

[@boris9064]

Отличная идея! Спасибо за Вашу идею! С приветом из России!

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video? I'm happy to have you watch my videos in Russia! Thank you

[@shrk73]

очень хорошая идея, ведь всё гениальное - просто! 100% поделюсь с друзьями, мы из России, Западная Сибирь

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Russia, Western Siberia! Thank you

[@anonymousmg76]

Pozdrawiam serdecznie z Polski północno-zachodniej ❤

[@user-zp6io2ro5n]

Привет из Кемерово!

[@vikshaban]

Привет из Омска!

[@user-ff5zv3um3u]

Для покрытия шифера нужно тогда брать силикон стойкий к ультрафиолету. А то через месяц-два все твое гидрофобное покрытие развалится нахрен

[@Kingfishblood]

In Australia we use white spirits,
Description
• Good solvency for oil, grease, wax, silicone and general dirt
• Removes stains
• Can be used for multi-purpose cleaning and thinning applications
• Home dry cleaning fluid
• Carpet cleaning
DIGGERS™ White Spirits (home dry cleaning fluid) is a widely used hydrocarbon solvent that provides good solvency with controlled evaporation. Typically used as a home dry cleaning fluid, for carpet cleaning, as a spot remover, paint thinner and cleaner or wax remover and degreaser.

[@inprogress.]

Great idea thanks for giving me a new idea! Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Australia! Thank you

[@alexk6745]

Thanks, I'm from australia and tried aceton which did not work. Will try white spirits.

[@HYDRA_MARK_VI]

@@alexk6745⁠So? Did it work?! 😃

[@Steli320]

Τα ενεργά συστατικά του P646 είναι:
τολουόλιο - 50%.
βουτανόλη - 15%.
οξικό βουτυλεστέρα - 10%.
αιθυλική αλκοόλη - 10%.
αιθυλοκελοσόλη - 8%.
ακετόνη - 7%.

[@vaultron]

In Australia the solvent to use is called shellite available at Bunnings 1 ltr bottle approximately $6

[@4ikdimon1]

Спасибо, за супер идею.
Я из Израиля

[@user-zv6ei1ey4g]

Действительно шикарная идея! Просто, как всё гениальное! Обязательно воспользуюсь вашим методом! Спасибо из Курска!

[@edik0101]

Поторопитесь воспользоваться идеей, в Судже вон не успели

[@Roman-el3ke]

Спасибо за наглядное видео без лишних слов и всё понятно.
Просьба больше таких снимать 😊
Интересует защита от огня. Я ещё хочу защиту от огня какую-то белую краску для труб используют для теплоизоляции

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@basheeralshibani6890]

شكرا لك على هذه المعلومه
من سوريا

[@user-yt6vq5zc3z]

Отличная идея.Буду пробывать.Я из Саратова

[@enednakul3923]

Harika bir fikir tebrik ediyorum banyo ve mutfak dolabı bu fikir ile hem ıslanmaz şişme kabarma meydana gelip özelliklerini kaybetmiş olmaz bunu mutlaka yapacağım harika bir buluş

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@edwardpysklak6161]

Uważaj,żebyś nie puścił kuchni z dymem,pozdrawiam😢

[@winkus8586]

It is good for waterproofing. The downside is the low solid content especially after it got crosslinked in contact with moisture either from air or in the solvent. At high solid content, it will form gel

[@egeo7296]

Fácil, ponele mayor proporción de silicona en el diluyente. Sabemos que hay muchos productos específicos para estas aplicaciones, esta es una solución casera muy satisfactoria.
Saludos desde la Argentina.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@handymangrandpa316]

I dont get it,

[@javierbaquiro6271]

Cómo será el resultado en la humedad?

[@javierbaquiro6271]

O a la interperie

[@pppsss5653]

I am from Hyderabad, INDIA and saw your useful video. Please specify the Solvent. Many people gave good ideas like White Spirits ftom Australia, Isopropyl Alcohol etc., But you may have not thought about it.. But giving correct defined name of solvent is needed to get Best Results that you displayed. However Thanks again for video. 😊

[@svistoplyas]

Solvent is nothing more than a mixture of hydrocarbons, namely aromatic and unsaturated cyclic ones with an admixture of a minimum set of naphthenes and paraffins

[@svistoplyas]

it is a hydrocarbon based solvent

[@exorbis9880]

It might be turpentine (or equivalent)

[@michaelgravelle9091]

It's acetone

[@dmitrymg2540]

😃 Там же написано - *Растворитель 646* 😀
646 is used to dilute paints and varnishes. (a mixture of 0.5 toluene, 0.15 ethanol, 0.1 butyl acetate, 0.1 butanol, 0.08 ethyl cellosolve, 0.07 acetone)

[@user-yt7zu8bz8r]

Спасибо от души,возьму на заметку.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@cyberlizardcouk]

Useful for sealing slight leaks in tents.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@philgray1023]

True, I forgot about that. A guy told me that was how he waterproofed a canvas cover.

[@user-ko4wn4tr8w]

🇬🇷 εξαιρετική δεν ευχαριστούμε πολύ
Από θεσσαλονίκη

[@inprogress.]

I'm happy to have you watch my videos in Thessaloniki! Thank you

[@edwardbourgeois1730]

im from USA! that is amazing! Thank you for sharing!

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video? I'm happy to have you watch my videos in USA! Thank you

[@jamesstevens1972-q2v]

Your brave admitting you are from the USA!

[@candeffect]

@@jamesstevens1972-q2v USA! USA! USA! Trump/Vance 2024!

[@zybbok6122]

OMG! This is just fantastic. A few tears ago I got laminated flooring in my whole house and the flooring in the kitchen is in a terrible mess. The flooring is all lifting and swelling at the edges because of water ingress. Laminated flooring is not waterproof at all and the guys that laid it didn't tell me this, all they wanted was to be paid for laying the flooring. Turns out the laminated flooring is just made of MDF and that is not a waterproof material at all. MDF is an engineered wood composite made from leftover hardwood or softwood fibres, resin, and wax. It is created by breaking down wood fibers into a pulp, mixing them with a bonding agent, and then pressing the mixture into thick sheets under high temperature and pressure. It is often used as a cost-effective alternative to solid wood for furniture, cabinets, and other wood products. It's OK for furniture but I'd not recommend it for any type of flooring that will get wet. I could have painted the edges of the flooring before it was laid if I'd known about this, making the edges completely waterproof.

[@user-cn1op7ni8j]

Хорошая идея,надо попробовать и проверитьна устойчивость к ультрофиалету.Алтайский край.

[@user-ht7gj1sr5l]

Думал чем покрыть деревянные столбы на веранде👍 Набережные Челны

[@sharano53]

Как с гуся вода. Отличная идея. Привет с берегов Дуная!

[@campescampes864]

Excelente ideia, parabéns. Poços de Caldas, Brasil.

[@inprogress.]

I'm happy to have you watch my videos in Brasil! Thank you

[@DoubleD_83]

Using a candle does the same thing . But this one was a new one for me .👌

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@prasarns.4590]

ไอเดียร์เจ๋งมากเพื่อน..ไทยแลนด์

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Thailand! Thank you

[@Vladimir_Sabanin1162]

Интересная идея. Надо будет попробовать на деревянных формах для гипса.

[@boullotguillaume5216]

I used to do this for my tent and old motocycle clothes, really excellent results (solvant terpentine).
Unfortunatelly, it catch dusts and make kind of stains...
But really waterproof under big rain.

[@waltermessina5462]

Is a well knowed method to waterproof fabrics too

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-ti8ch7gx5m]

Здраствуйте ! Можете ответить ??? ДЕРЕВЯННУЮ СКАМЕЙКУ​ ПРОШЁЛ С ВАШИМ СПОСОБОМ И СВЕРХУ КРАСКОЙ МОЖНО ПРОЙТИ ??
ИЛИ ЛАКОМ ?!
СКАМЕЙКА ВО ДВОРЕ БУДЕТ ПОСТОЯННО .
СПАСИБО ЗА ОТВЕТЬ@@inprogress.

[@user-uo2tf1rr7g]

Ткань испортится от растворителя..

[@k770k770]

Можно разбавить спиртом наверно ​@@user-uo2tf1rr7g

[@MMMM2MMMM2MMMM]

than PLEASE do NOT wear the fabrics ever again! Both Ingredients will be absorbed by the human skin, cumulate and may cause nasty effects on skin and organs.

[@user-mpampis060Gr]

Τα αποτελέσματα του έργου σας θα πρέπει να δοκιμαστούν στην διάρκεια του χρόνου, και σε διαφορετικές συνθήκες θερμοκρασίας περιβάλλοντος και έκθεσης στην ηλιακή ακτινοβολία.
Πάντως σας ευχαριστώ πολύ για την προσπάθεια ενημέρωσης.
Χαιρετισμούς από την Αθήνα πρωτεύουσα της Ελλάδας.😊

[@inprogress.]

I'm happy to have you watch my videos in Greece! Thank you

[@inprogress.]

This is a must try

[@rodiaserron7378]

Μπορείτε να μας πείτε τον διαλύτη? Διότι μπορεί σε ψυχρές χώρες να έχει αντοχή αλλά σε θερμές χώρες να κάνεις ζημιά ειδικά σε αμάξωμα αυτοκινήτου.Πολυ καλή ιδέα πάντως.Χαιρερισμους από κεντρική Μακεδονία από την πόλη την Σέρρες

[@RomanProff1]

Пенопласт тоже растворяется и такой эффект даёт и будет дешевле. Привет из Бреста

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video? I'm happy to have you watch my videos in Brest! Thank you

[@alexalex2248]

Пенопласт покрывает твердой коркой, типа стекла

[@user-yx7jp3ns5l]

Пленка на основе пенопласта разрушается от ультрафиолета. Силикон более устойчив

[@user-yt6vq5zc3z]

Пенопласт в ксилоле хороше тоже растворяеться.В качестве клея.

[@utholok]

Отлично работает
Привет из России
Ростовская область

[@andyvill8131]

cual disolvente usaste?, cual es su nombre?

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video? I'm happy to have you watch my videos in Russia, Rostov region! Thank you

[@user-fz6qg5tm2v]

Спасибо, отличная идея! Покрою тент своей лодки от дождя по твоему рецепту.))

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@nikchaban6827]

проверь сначала, как растворитель действует на ткань тента

[@Don-carpillo]

Très bonne idée 👍 merci pour ton partage 😊😊

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@RickaramaTrama-lc1ys]

Great Video and I never thought of using these two things together and I can see a lot of places I could use them. I am watching you from Southern Arizona USA and I see you are in Germany. How great is You Tube for us to be able to communicate across continents~!! I subscribed and liked your Channel and hope to see more ideas like this one~!

[@inprogress.]

Sorry I'm not from Germany, if you know where I'm from you'll be even more surprised! I'm happy to have you watch my videos in USA! Thank you

[@BeLLa_Princess]

Здрасти я увидел и удивлен! Так просто и гениально👍 я из России (Якутия)

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Russia! Thank you

[@gamalzaher2815]

تحيا روسيا والنصر لروسيا مصر تحب الشعب الروسى وبوتن البطل

[@user-nt6ss3on3b]

​@gamalzaher2815 putin is a war criminal, and dictator. This is fact. Don't tell for all Egypt. You are uneducated man.

[@user-nt6ss3on3b]

​@@gamalzaher2815روسيا وصمة عار. فقط المعوقون أخلاقيا يحبون روسيا.

[@user-mn7uw1wk7q]

@@gamalzaher2815 " Египет любит русский народ и Путина-героя" - ну если для вас герой - тот, кто разрушает и убивает - то и вы такой же.... Печаль...

[@mursa46]

Solvent is a general name and has thousands of varieties. It is not possible to find out what the equivalent of the solvent used here is in many countries. Therefore, I would be very happy if you could give me information about different similar brands.

[@inprogress.]

I'm translating them all but Google Translate shows them all the same... Shown in the video. Transparent silicone and solvent...(Прозрачный силикон и растворитель 646)...(Transparentes Silikon und Lösungsmittel)

[@antoxapetrov]

I think 646 thinner is not a solvent anymore.

[@cosmozh]

Toluol - 50%;
Butanol - 15%;
Butylacetat - 10%;
ethylalkohol - 10%;
Ethylcellosolve - 8%;
Aceton - 7%.
Привет ребята

[@user-nd4tm2kj3o]

Und wozu das Ganze?

[@user-sc3un9oe4i]

​@@inprogress.-Ceea ce ai făcut cred că este bun la apă, umezeală,dar încearca să îi dai foc. Eu cred că este foarte inflamabil și atunci nu trebuie aplicat acest procedeu.

[@idalmoinocencionobrenobre387]

Muito bom
Obrigado por compartilhar
Montes Claros - MG
Brasil

[@inprogress.]

I'm happy to have you watch my videos in Brasil! Thank you

[@user-iu6pt9gr5e]

Друг, да это просто волшебство за гроши. Спасибо.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@MkMamamac]

Ну не такие уж и гроши, один герметик нормальный под косарь стоит

[@user-re3on5sk5r]

@@MkMamamac купи психованный :))))

[@nik_nikoch1641]

Отличное решение для продления срока службы натуральной черепицы. Обязательно обработаю перед укладкой. Нет воды в микропорах - нет растрескивания.
Россия, Нижний Новгород.

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Russia, Nizhny Novgorod! Thank you

[@PanaiotisArthur]

Продление срока службы натуральной черепицы??? 😂 Два века мало???

[@bootlegger4500]

Масло и воск будет дешевле и не хуже

[@halroy9610]

Try acetone. It's a solvent that will thin calking.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@alexk6745]

Acetone doesn't work for Parfix silicone from bunnings in Australia. It could be silicone is wrong but I tend to believe that Acetone is not god for the silicone.

[@Alex-yc4ds]

@@alexk6745 Another Aussie above said Acetone will not work, in Australia: we need to buy Diggers White Spirits as this will work.

[@pilarrumberog-s.1684]

Soy de 🇪🇸 🇪🇸 ESPAÑA de la autonomías de Castilla y León 🇪🇸 me gusta mucho los experimentos así se aprende y como se dice en España nunca te acostarás aquí esta frase es irte a dormir sin aprender una cosa más

[@inprogress.]

I'm happy to have you watch my videos in SPAIN! Thank you

[@EliasFazInvencao]

Em algumas regiões do Brasil em época de chuva, as pessoas que possue automóvel faz essa solução e aplica no para brisa

[@robmaggs4137]

@@EliasFazInvencao I am going to post about using it on bathroom (shower) glass and ask if anyone has tried it-and how long it lasts. I like the idea of car windscreens but thought it might make the glass streaky/smokey? Does it affect vision at all?

[@m.wahyudihartono6572]

Hi, I'm from Indonesia. Such a nice and useful info, tks a lot bro

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Indonesia! Thank you

[@javierinsuasty4801]

Hola . Me.parece un excelente aislante de la humedad. Muchas felicitaciones

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@malinoisattack]

Tolle Idee und super Lotuseffekt. Werde ich mal bei Gelegenheit ausprobieren. Heißt Lösungsmittel das es Verdünnung ist oder evtl. Auch Spiritus. Egal es wird ausprobiert.
Weiter so 👍 💪 🇩🇪!!!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@bfearl8279]

Great post. Got me to wondering if adding sodium bicarbonate (baking soda NaHCO3) to the mix would also make the material flame proof. I don't know enough to determine the mix ratio.

[@daviddionisio3825]

nice comment

[@robertogiannecchini1952]

Ti ringrazzio per l'idea anche perché a comprare protettori in silicone costano carissimi 😊 ti seguirò per altri consigli.

[@user-nv9bo2fh7r]

Привет Вася! Хорошая идея а главное рабочая! Здоровья крепкого тебе и терпения!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@Magistr31]

Спасибо мужик!!!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@atlara]

Eu sou do Brasil, na Zona Sul da cidade de São Paulo, próximo a avenida Cupecê. Obrigado pelo vídeo!
I'm from Brazil, in the South Zone of the city of São Paulo, close to Ave. Cupecê. Thanks for the video!

[@inprogress.]

I'm happy to have you watch my videos in São Paulo! Thank you

[@paquiromero8189]

Los Barrios Cadiz

[@user-kg2md1jb7j]

Hello, nice to meet you.
I came from Japan.thanks for the good idea
I tried paint thinner and lacquer thinner. Polypropylene plastic only lasted about three months.

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Japan! Thank you

[@nothankyou5524]

Plastic can have very particular properties for many reasons. That's why it's generally against code in most instances

[@mar09iu]

THANK YOU My Dear. I'm Marcos Valentim from Rio de Janeiro , BRASIL !! BEST REGARDS

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Rio de Janeiro! Thank you Marcos Valentim

[@sergeikalinin9108]

Хорошая идея! Надо испытать. Россия.Екатеринбург.

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Russia! Thank you

[@KolyanZja]

Испытали?

[@MrDux311]

Машину попробую покрыть

[@galikeev.ilgiz-]

@MrDux311 Не вздумай. Если надо будет красить или чем то обработать, ничто к такому покрытию не прилипает. И оно не смывается, даже химией. Если только растворителем вместе с лаком

[@alisaid62]

Très bonne idée, pas chère et efficace ❤. Merci

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-be9ud5dv4d]

Потрясающий результат! Я из Санкт-Петербурга

[@adaoaguiar8040]

Assisti seu vídeo no Brasil. Vou fazer experiências com alguns solventes que se encontra por aqui. Continue postando videos como esse.

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Brasil! Thank you

[@Pjv286]

An amino silicon oil is better ,it requires catalyst to cross link ,heating required 150 C.for 2minuts,It is durable water proofing.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@dionisioarnalgarcia7744]

Genial ahora hace falta saber cuanto durará la proteccion, un día una semana, un año... un saludo desde Barcelona España

[@itatai1]

Fantástico. Era o que eu estava precisando. Muito obrigado por compartilhar essa idéia.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-mq6ob2gx1d]

Супер, спасибо вам!!! 👍 Из России привет

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video? I'm happy to have you watch my videos in Russia! Thank you

[@user-cz3jy1qe4i]

Привет отличная идея , 👍👍 спосибо вам 🎉 за совет буду знать 😅😅🧑‍🔧🧑‍🔧

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@RobertoVolpato-dz6oo]

Mi hai dato l'idea di provare a isolare le fughe delle piastrelle sul terrazzo. Bravo, very good😮😮

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@leonardo5225]

Real! I have the same problem too

[@BilloPisa]

Stesso problema con fughe delle piastrelle del terrazzo. Fino ad oggi acquistavo prodotti repellenti a basa siliconica. Adesso proverò con questa idea!!!
Bravo e grazie per la condivisione. Toscana - Italia

[@josedejesusyanezsolano1105]

😢Gracias gracias gracias desde el Espinal Tolima Colombia.........

[@inprogress.]

I'm happy to have you watch my videos in Colombia! Thank you

[@prihlassa]

dobrý nápad, pozdrav z Slovakia

[@juandelarosa608]

EXCELENTE VIDEO , ESTA CONBINACION NO AFECTARIA MI LOZA(TECHO DE CONCRETO) SALUDOS DESDE MI BELLO PUERTO DE VERACRUZ, VERACRUZ (MÉXICO) GRACIAS POR TU VÍDEO

[@inprogress.]

I'm happy to have you watch my videos in MÉXICO! Thank you

[@juandelarosa608]

@@inprogress. KEEP LIKE THIS GOOD VIDEO

[@Madafakers]

Te va a salir carisima esta receta, lo mejor es que uses los impermeabilizantes disponibles en el mercado.

[@user-um7dd6lv3c]

Exelente , gracias por compartir esta gran idea de mucha utilidad saludos de Veracruz mex. 👍👍👍👍👍👍💯💯💯💯

[@inprogress.]

I'm happy to have you watch my videos in Veracruz! Thank you

[@DfgfDg-eu1eo]

Хорошая идея для покраски деревянных домов, лавок , оконных рам , беседка, деревянные вагонки, а если это дерево из дуба то вообще на века!!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@user-fz5il7uc5f]

Силикон дорогой.

[@Luis-gb3vq]

Amazing idea. I am Luis from Paraguay.

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Paraguay! Thank you Luis

[@leonidn.vasilijev3189]

Россия, Самара. Спасибо за интересную идею, буду пробовать!

[@inprogress.]

I'm happy to have you watch my videos in Самара! Thank you

[@user-vw5jo5xf8h]

Оно того не стоит, есть магазинный вариант похожий

[@Andrey_R]

Приветствую земляка! Метод рабочий, 6 лет назад использовал. Восстанавливал герметичность сапоги-забродники, наносил на внутреннюю поверхность. Концентрацию использовал более сильную, густую - наносил кистью. Не каждый герметик растворяется, тот который с запахом уксуса походит для этого. Без запаха не растворялся разными видами растворителя и уайт-спирта. Для исключения промахов нанесения на поверхность, лучше использовать белый или цветной герметик (если это возможно).

[@user-vw5jo5xf8h]

@@Andrey_R ну оно без условно работает, но если надо что то по мелочи то можно немного замешать. А вот при больших обьемах бессмысленно даже в плане цены т.к. есть подобные смеси заводского изготовления и если не ошибаюсь то рублей 350 за 2 кг стоит

[@wolfgangarmbruster-gg8ol]

Das ist super Dankeschön aus Deutschland

[@inprogress.]

I'm happy to have you watch my videos in Deutschland! Thank you

[@geertvandengoor8900]

Also test this on textiles. Not of course on material that is dissolved by the solvent. And also on shoes for example to make them waterproof / repellent.

[@inprogress.]

A must try! Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@alejandroespinosa4383]

Excelente idea muy práctica para aplicarse en múltiples usos

[@joefregoso2725]

Qué cosas más impresionantes, muy buena información, saludos

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@garelo01]

Muy buena y estupenda idea. Desde España un saludo.

[@inprogress.]

I'm happy to have you watch my videos in Spain! Thank you

[@sergeyocheretin291]

для проникания возьмите больше растворитель в процентном отношении м поддержите дольше, или даже окунить и подержите в растворе вещь.

[@Aleksandrshevelev62]

Идея замечательная, надо тоже попробовать. 👍

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@robertmarcotte4652]

From Seattle Wa, USA area. A great waterproofing / hack. From a construction supervisor of over 45 years.

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in USA! Thank you

[@lucasgreen9770]

What type of solvent did you use?

[@user-yx4li5uy8w]

Привет из России!!!
Хорошая идея, обязательно воспользуюсь.
Спасибо!

[@user-yx4li5uy8w]

Москва/Люберцы

[@inprogress.]

I'm happy to have you watch my videos in Москва/Люберцы! Thank you

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@rubenrachalai9787]

Excelente voy a probar metales chapa en este caso y ver qué pasa con el sol Gracias desde las Pampas

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Pampas! Thank you

[@DAVIDGONZALEZ-xo4tg]

Las moléculas del material se impermeabilizan por completo... Muy bueno!!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@angelramonlemesnuez4281]

Saludos desde gran canaria españa 🇮🇨🇪🇸

[@inprogress.]

I'm happy to have you watch my videos in Gran Canaria Spain! Thank you

[@miguelvanrell3999]

de argentina muy bueno invento lo voy a poner en pratica

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Argentina! Thank you

[@emmanuelfernandez5528]

Thank you for showing this idea. From Northwest Georgia, USA

[@fahriturk2298]

Türkiye'den selamlar çok güzel bir fikir teşekkürler.Eline sağlık

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video? I'm happy to have you watch my videos in Türkiye! Thank you

[@brianmccormack9828]

Flip the darn nozzle so it sprays instead of streams…

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@VladimirRevskiy]

Тоже подумал🤷🏻‍♂️

[@user-ql4jb9dk2r]

Так ,на этой насадке ,всего два положения - ОТКР. и Закр. (IN - OFF)

[@VladimirRevskiy]

@@user-ql4jb9dk2r обычно струя-закрыто-распыление-закрыто…

[@user-fb9cz4zv7r]

​@@user-ql4jb9dk2rвы никогда не пользовались жидкостями в таких флаконах ?

[@the-real-iandavid]

I looks like a good idea! How long does the product last on the surface? How long does the product last in the bottle? 🤔

[@inprogress.]

It's definitely a must try! Thanks for leaving your thoughts in the comments!

[@nothankyou5524]

Every mix is gonna be different. Products that can go by generic names are not going to be production consistent. And that includes the mechanics of production. Change anything and you change everything. That's Newtonian physics.

[@user-li3mq6yv5d]

Отличный вариант. Надо испытать. Спасибо автору.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@jaimealbertogarcia833]

Genial, mil gracias, esto me ayudará mucho en mis trabajos de ahora en adelante. Te deseo muchos éxitos.

[@ozgurozan324]

Hi friend, could you please give me the chemical name of the solvent that you have used in this video because i couldnt find the product in my country by the information i could get from your video, i would like to search for it by the formula if it is possible. Thank you for your great job cause i really needed this tip.

[@inprogress.]

I'm translating them all but Google Translate shows them all the same... Shown in the video. Transparent silicone and solvent...(Прозрачный силикон и растворитель 646)...(Transparentes Silikon und Lösungsmittel)

[@ozgurozan324]

​@@inprogress. Thank you for the answer my friend. I hope I can find the right material here too. Best regards

[@Varrcan]

Composition of solvent 646 according to GOST 18188-72
butyl acetate 10%
ethyl cellosolve 8%
acetone 7%
butyl alcohol 15%
ethyl alcohol 10%
toluene 50%

[@rhombus1043]

Лучше взять White spirit 1050

[@MrSerega6363]

Попробуй на ткани палатки! Молодец!

[@inprogress.]

Great idea thanks for giving me a new idea! Thanks for leaving your thoughts in the comments!

[@1jay288]

растворитель расплавить синтетику

[@MrSerega6363]

@@1jay288 спасибо.

[@HolicCreation]

Wow, so amazing idea 😍

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@ayadal-deleimy6071]

Thumb up 👍 from Iraq/Mosul...go ahead & good luck, it's really so nice ,short and useful video 🎉❤

[@inprogress.]

Thanks for leaving your thoughts in the comments! I'm happy to have you watch my videos in Iraq! Thank you

[@inprogress.]

I'm a master who wants the whole world to know my thumb!

[@user-qu2te7ob8v]

Спасибо. Не знал об этом способе.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@maker-12]

Very good

[@inprogress.]

Thanks for leaving your thoughts in the comments!