Great tip - In fact I took it one step further and used "DWN" mic button to trigger voice recording and the "FST" button to perform the playback. That frees up the "CS" button for me to set it to SWR so that my external tuner is trigger to tune. Cheers !
Thanks very much for this video. It has gotten me ready for the Ohio QSO Party today. Purchased one of these radios recently and still figuring it out.
M6ORM, Fantastic! Thank you. The Yaesu instruction manual was suggesting other instructions . Instructions That were not working, Then I found your video and it now works . Thank in you very much. I made my first CQ shortly after. Thanks again.
You're welcome! Just happy I could help others with this. As mentioned in another post bellow, I have now changed to using the FST button, as you'll need the DWN when using FM.
Map it to the FST button on the mic, You'll find you need the DWN one if you are using fm or scanning etc. Thanks for watching and commenting and enjoy your rig. All The Best, Ross. (Formerly M6ORM, Now 2E0 NNG)
Here I explain what happens with my Yaesu FT-450. A few days ago I made the mistake of trying a radio from a friend of mine when my FT-450 was on receiving, they had two different antennas but the separation between the antennas on the roof are 3 meters. When I was testing the radio in transmission I felt a burning smell from my friend and I realized that it was coming from my radio, at the moment I turned it off and when I turned it back on it had changed many things like: - TRANSMIT BUT DOES NOT GIVE ANY OUT POWER IN (AM) MODE ON ANY BAND. - THE SYSTEM (ALC) DOESN'T WORK, NEVER MARK ANYTHING ON THE DISPLAY, BEFORE IT WORKED VERY GOOD. - ESPECIALLY IN 6M (50MHZ) BEFORE HAD 100 WATT, NOW ONLY HAS 10WATT AND WHEN CW OR SSB TRANSFER FEELS MY VOICE OR NOISE IN THE RADIO HORN. - THE INTERNAL RADIO TUNER ANTENNA DOES NOT ADJUST IN SOME BANDS AND HIGH SWR WITH GHOST ANTENNA DUMMY 50OHM ADJUST 1: 1 ALMOST ALL BANDS, I REMOVED THE RADIO TUNER ANTENNA AND CONTINUES WITH THE SAME PROBLEM, THE PROBLEM IS NOT THE INT-TUNER OF THE FT-450. - BEFORE ALMOST ALL BANDS DRAWN 100 WATT CW AND ALMOST 90 WATT SSB. NOW HIM RESULT WITH LOAD DUMMY 50OHM PER BAND IS: 160m ... fm .... 100 watt cw .... 100 watt am .... no carrier no power fonia and digital .. 100 watt ----------------------------- 80m ... fm .... 100 watt cw .... 100 watt am .... no carrier no power fonia and dgital .. 100 watt ----------------------- 40m .... fm .... 70 watt cw .... 70 watt am .... no carrier no power fonia and digital ..40 watt ----------------------- 30m ....... fm .... 70 watt cw .... 70 watt am .... no carrier no power ----------------------- 20m ....... fm .... 70 watt cw .... 70 watt am .... no carrier no power fonia and digital .. 40 watt ----------------------- 17m ....... fm .... 50 watt cw .... 50 watt am .... no carrier no power fonia and digital .. 30 watt ------------------------ 15 m ........ fm .... 80 watt cw .... 80 watt am .... no carrier no power fonia and digital .. 80 watt ------------------------- 12m ......... fm .... 80 watt cw .... 80 watt am .... no carrier no power fonia and digital .. 50 watt When I transmit on the phone you can hear it on the radio horn ------------------------- 10m ......... fm .... 50 watt cw .... 50 watt am .... 10watt fonia and digital .. 50 watt --------------------------- 6m ......... fm .... 20 watt cw .... 20 watt am .... 20 watt fonia and digital .. 20 watt, When I transmit in fonia it is heard in the radio horn. He also seems to be crazy, he makes noise and he seems to have serious problems. I RESET HOME OF THE RADIO AND CONTINUE WITH THE SAME PROBLEM, THE PARAMETERS THE HIDDEN MENU IS CORRECT, THE RECEPTION IS CONSIDERED GOOD IN ALL THE BANDS AND MODES. I CHECK THE BOARDS OR BOARDS AND ALL ARE IN GOOD PHYSICAL CONDITION, NONE COMPONENT SEEMS TO BE BURNED. BEFORE MAKING THE ERROR MY RADIO WAS WORKING NO PROBLEM WITH 100 WATT IN ALL THE BANDS AND THE AUT INT ALSO WORKED NO PROBLEM. I HOPE THAT WITH THESE DATA YOU CAN GIVE ME AN IDEA OR OPINION OF WHAT PROBLEM THE TEAM HAS THOUSAND THANKS IN ADVANCE. note :Now I have realized that when I press the ATT or IPO key that is only for reception it falls even more the power in all the bands, in addition I tested it in reception 6m 50mhz and it has problems also at the reception . BEST 73.- EDUARDO CO8LY
My unprofessional opinion is that you've fried something. Antenna need to be AT LEAST a wavelength apart, and if you're opperating two rigs in close proximity, they shouldn't have been on the same band. When my friends and I go on field weekends, each radio has a filter for the band that it's working on, and no two radios work on the same band, at the same time. My advice is to get that radio into a proper repair specialist, as that will not be fixed through the menu system.
hi, 73....Hello, do you know how to record and play the recorded on the air? not in rec 1 and rec 2, that is done. record colleagues modulating and retransmit the recording.
Hi Rey. I'm afraid I don't. something to look into though. Although, the voice module only records once the PTT is pressed, so I'm not sure if it can be done at all.
@@rossormonde thanks for answering 73, ok, in the function of PNL.CS you are going to look for P / B and you tighten the function. Then when you are receiving a signal you leave the voice button pressed and it will record the conversation while leaving it up to 20 seconds. When I want to retransmit the recorded conversation, it does not. Therefore, I understand that there must be some modification in the matter is that I can not find it anywhere.
Under a UK license I'm sure it would go against the rules to "scramble" a transmision and I haven't come across a feature within this radio that would allow you to do as such.
Great tip - In fact I took it one step further and used "DWN" mic button to trigger voice recording and the "FST" button to perform the playback. That frees up the "CS" button for me to set it to SWR so that my external tuner is trigger to tune. Cheers !
Yes. This is what I've looking for since months. To set the mic keys. Thank you very much and 73!
Thanks very much for this video. It has gotten me ready for the Ohio QSO Party today. Purchased one of these radios recently and still figuring it out.
M6ORM, Fantastic! Thank you. The Yaesu instruction manual was suggesting other instructions . Instructions That were not working, Then I found your video and it now works . Thank in you very much. I made my first CQ shortly after. Thanks again.
You're welcome! Just happy I could help others with this. As mentioned in another post bellow, I have now changed to using the FST button, as you'll need the DWN when using FM.
@@rossormonde thanks
Ive just purchased the 450d and thats a clever trick..think ill do it this way
Map it to the FST button on the mic, You'll find you need the DWN one if you are using fm or scanning etc. Thanks for watching and commenting and enjoy your rig. All The Best, Ross. (Formerly M6ORM, Now 2E0 NNG)
Great video buddy , Shane uk 🇬🇧
Works perfectly, many thx
You can make a video of how to transmit the playback recorded in frequency, 73
Many thanks all working 73's
Here I explain what happens with my Yaesu FT-450.
A few days ago I made the mistake of trying a radio from a friend of mine when my
FT-450 was on receiving, they had two different antennas but the separation
between the antennas on the roof are 3 meters. When I was testing the radio in transmission
I felt a burning smell from my friend and I realized that it was coming from my radio, at the moment
I turned it off and when I turned it back on it had changed many things like:
- TRANSMIT BUT DOES NOT GIVE ANY OUT POWER IN (AM) MODE ON ANY BAND.
- THE SYSTEM (ALC) DOESN'T WORK, NEVER MARK ANYTHING ON THE DISPLAY, BEFORE IT WORKED
VERY GOOD.
- ESPECIALLY IN 6M (50MHZ) BEFORE HAD 100 WATT, NOW ONLY HAS 10WATT AND WHEN
CW OR SSB TRANSFER FEELS MY VOICE OR NOISE IN THE RADIO HORN.
- THE INTERNAL RADIO TUNER ANTENNA DOES NOT ADJUST IN SOME BANDS AND HIGH SWR
WITH GHOST ANTENNA DUMMY 50OHM ADJUST 1: 1 ALMOST ALL BANDS, I REMOVED
THE RADIO TUNER ANTENNA AND CONTINUES WITH THE SAME PROBLEM, THE PROBLEM IS NOT
THE INT-TUNER OF THE FT-450.
- BEFORE ALMOST ALL BANDS DRAWN 100 WATT CW AND ALMOST 90 WATT SSB. NOW HIM
RESULT WITH LOAD DUMMY 50OHM PER BAND IS:
160m ...
fm .... 100 watt
cw .... 100 watt
am .... no carrier no power
fonia and digital .. 100 watt
-----------------------------
80m ...
fm .... 100 watt
cw .... 100 watt
am .... no carrier no power
fonia and dgital .. 100 watt
-----------------------
40m ....
fm .... 70 watt
cw .... 70 watt
am .... no carrier no power
fonia and digital ..40 watt
-----------------------
30m .......
fm .... 70 watt
cw .... 70 watt
am .... no carrier no power
-----------------------
20m .......
fm .... 70 watt
cw .... 70 watt
am .... no carrier no power
fonia and digital .. 40 watt
-----------------------
17m .......
fm .... 50 watt
cw .... 50 watt
am .... no carrier no power
fonia and digital .. 30 watt
------------------------
15 m ........
fm .... 80 watt
cw .... 80 watt
am .... no carrier no power
fonia and digital .. 80 watt
-------------------------
12m .........
fm .... 80 watt
cw .... 80 watt
am .... no carrier no power
fonia and digital .. 50 watt
When I transmit on the phone you can hear it on the radio horn
-------------------------
10m .........
fm .... 50 watt
cw .... 50 watt
am .... 10watt
fonia and digital .. 50 watt
---------------------------
6m .........
fm .... 20 watt
cw .... 20 watt
am .... 20 watt
fonia and digital .. 20 watt, When I transmit in fonia it is heard in the
radio horn. He also seems to be crazy, he makes noise and he seems to have serious
problems.
I RESET HOME OF THE RADIO AND CONTINUE WITH THE SAME PROBLEM, THE PARAMETERS
THE HIDDEN MENU IS CORRECT, THE RECEPTION IS CONSIDERED GOOD IN ALL
THE BANDS AND MODES.
I CHECK THE BOARDS OR BOARDS AND ALL ARE IN GOOD PHYSICAL CONDITION, NONE
COMPONENT SEEMS TO BE BURNED. BEFORE MAKING THE ERROR MY RADIO WAS WORKING
NO PROBLEM WITH 100 WATT IN ALL THE BANDS AND THE AUT INT ALSO WORKED
NO PROBLEM.
I HOPE THAT WITH THESE DATA YOU CAN GIVE ME AN IDEA OR OPINION OF WHAT PROBLEM
THE TEAM HAS THOUSAND THANKS IN ADVANCE.
note :Now I have realized that when I press the ATT or IPO key that is only for reception it falls
even more the power in all the bands, in addition I tested it in reception 6m 50mhz and it has problems
also at the reception .
BEST 73.- EDUARDO CO8LY
My unprofessional opinion is that you've fried something. Antenna need to be AT LEAST a wavelength apart, and if you're opperating two rigs in close proximity, they shouldn't have been on the same band. When my friends and I go on field weekends, each radio has a filter for the band that it's working on, and no two radios work on the same band, at the same time. My advice is to get that radio into a proper repair specialist, as that will not be fixed through the menu system.
thanks will try ...
good, thanks 73
hi, 73....Hello, do you know how to record and play the recorded on the air? not in rec 1 and rec 2, that is done. record colleagues modulating and retransmit the recording.
Hi Rey. I'm afraid I don't. something to look into though. Although, the voice module only records once the PTT is pressed, so I'm not sure if it can be done at all.
@@rossormonde thanks for answering 73, ok, in the function of PNL.CS you are going to look for P / B and you tighten the function. Then when you are receiving a signal you leave the voice button pressed and it will record the conversation while leaving it up to 20 seconds. When I want to retransmit the recorded conversation, it does not. Therefore, I understand that there must be some modification in the matter is that I can not find it anywhere.
Very good video
Tnx
Sv1gzl
Lykourgos
done, but I have used fst button instead
Andrzej Papiewski I have also swapped over to use the FST button as well now. I realised I need the DWN button when using FM.
anyone know how to scramble voice FT450D ? need help and refreence about this, many thanks..
Under a UK license I'm sure it would go against the rules to "scramble" a transmision and I haven't come across a feature within this radio that would allow you to do as such.