Another channel recommended bypassing the fusible resistor with a bit of copper wire to short across it. Boot up the printer once, then remove the wire. Worked for me.
I have Samsung CLX-3305, it comes with CLT-R406 fuser. I have tried to reset the printer several times. I have used a resistor of a value 46 kohm 100 kohm (this was the origina resistor value) 137 kohm 270 kohm together with picofuse 63 mA or fast action 50 mA glass fuse. The printer says still: "Fuser unit failure #U1-2320 turn off then on." What to do next?
I have a Samsung C410W and it appears to be just a 200 k and not a 56k with it. I replaced it with a 56k and it quickly started smelling overheated. When I test it, it still shows 56k. Should I put in just another 200k which didn't register anything with an ohm meter?
Hi thanks for this video, i have the samsung xpressm2880fw but im not able to find the resistor. Is there one on this printer ? I have the message fuser unit error
Hello everyone! I'm having an issue with my Samsung color laser printer. I recently replaced two resistance fuses in the printer's oven, both with a resistance value of 100 ohms and connected in parallel. However, the fuses keep burning out and the printer indicator switches from blue to orange. Has anyone experienced this problem before or have any ideas on what might be causing this? I would greatly appreciate any advice or suggestions. Thank you!
I payed to someone to do me, a hack print many years ago. I don't know how they did it. But today I cleaned the drum unit and the transfer belt. But does not start. Only for 2 seconds rotate the spins and after that all stops and the red light is on. Its acting like paper jam, but before I cleaned it worked... What may be the problem? Please help me. I can send you a video if you want. Now I checked with Samsung printer manager and the error is "replace/install toner waste bin"
@@viandant5 I have a samsung c8385nd printer. It started saying that the printer cartridges are incompartible and the red light comes on. They have been working all the time. How can I solve this problem? Please help
@@suleimansuleiman3932 Probably you updated the printer driver. Those updating can give you similar problems. Probably you have to buy new cartridges with the new chip version
Another channel recommended bypassing the fusible resistor with a bit of copper wire to short across it. Boot up the printer once, then remove the wire. Worked for me.
you're doing the lords work
Fantastic! Thank you very much!
Has there been a class action lawsuit against Samsung for this illegal practice?
شكرا لك اخي على العمل الرائع
I have Samsung CLX-3305, it comes with CLT-R406 fuser.
I have tried to reset the printer several times. I have used a resistor of a value
46 kohm
100 kohm (this was the origina resistor value)
137 kohm
270 kohm
together with picofuse 63 mA or fast action 50 mA glass fuse.
The printer says still: "Fuser unit failure #U1-2320 turn off then on."
What to do next?
Sorry I don't know a method to reset the fuser unit. I tried the same with a fast 100 mA glass fuse
just for reference the main reistor is 100K not 200K as the video narrator says, not that that is really important
Means in 200k how many watt needs? Also in 56k
Good
I have a Samsung C410W and it appears to be just a 200 k and not a 56k with it. I replaced it with a 56k and it quickly started smelling overheated. When I test it, it still shows 56k. Should I put in just another 200k which didn't register anything with an ohm meter?
The fuse is 56 omh not 56k
@@viandant5 Sorry, it was a 56 ohm that I put in and it didn't work
@@brewster102 a 100 ohm should work too
Why you put another one resistor in parallel? ?
samsung did it
Hi, this method is to reset toner issue that it disallow to print and lot of red Led in front panel showing the locking??
it's related to the drum unit
Hi thanks for this video, i have the samsung xpressm2880fw but im not able to find the resistor. Is there one on this printer ? I have the message fuser unit error
No, in this drum unit there is ot that resistor, there is a chip.
Can you please let me know how can i the Samsung SCX4729FD by Printing get the Black STREIPS .
Always in the same position? Are the lines on the drum too?
Would it work to put a shorting strip in the cartridge instead of a resistor?
May be, if you stop the machine exact when the fuser has to blow then remove the shorting strip
How much current would be required to blow the fuse they use here?
Please how can I reset Samsung clp 620nd chips. Or if I refill at 20% can it still print?
There is no way to reset the chip. You have to change it
Hello everyone! I'm having an issue with my Samsung color laser printer. I recently replaced two resistance fuses in the printer's oven, both with a resistance value of 100 ohms and connected in parallel. However, the fuses keep burning out and the printer indicator switches from blue to orange. Has anyone experienced this problem before or have any ideas on what might be causing this? I would greatly appreciate any advice or suggestions. Thank you!
It's only one resistanze, not two. The other component is not a resistance
Greetings, how are you? I need support as a technician, I have a samsung xpress c460w print blue ........ the entire sheet and does not give an image
You men you have a white page?
Thank you! I replaced the whole thing, and when I go to print, it says printing, but nothing is coming out!
Did you replace the drum unit? Try to reinsert the old drum unit, may be the new one is defective. Probably the charge roller
How to fix ghost printing?
ua-cam.com/video/93pkvMvk-GQ/v-deo.html
Anche la stampante samsung Ml-1665 ha questa resistenza?
No, ha un chip
can i Reset chip xerox 6700 شكرا لك
not possible to reset it
how to reset chip for samsung 6260 please
There is no way to reset a chip. You can only change it
What can I do for hp107a chip. How to overcome problem with this chip?
You have only to change it, no way to reset it
I payed to someone to do me, a hack print many years ago. I don't know how they did it. But today I cleaned the drum unit and the transfer belt. But does not start. Only for 2 seconds rotate the spins and after that all stops and the red light is on. Its acting like paper jam, but before I cleaned it worked... What may be the problem? Please help me. I can send you a video if you want. Now I checked with Samsung printer manager and the error is "replace/install toner waste bin"
I think you have to empty and clean the waste toner box. May be you shake it and the toner covered the windows of the box
@@viandant5 I have a samsung c8385nd printer. It started saying that the printer cartridges are incompartible and the red light comes on. They have been working all the time. How can I solve this problem? Please help
@@suleimansuleiman3932 Probably you updated the printer driver. Those updating can give you similar problems. Probably you have to buy new cartridges with the new chip version
What about the watt?
I don't know the watt of the fuse
0.25W
Printer bar
Sellprinter bar
Sellphone
Ilnk? ( l )