Regeneracja ? Rolki się w bardzo prosty sposób demontują. Wtedy je łatwiej wyczyścić. Po demontażu rolek można zdemontować listwę zgarniającą aby oczyścić śmietnik.
I tried to buy a new drum for my CLP-315 printer, but when I removed the drum to clean up and check if it was really necessary, I saw another roller behind it (this one was ok) and behind that roller, there was another one covered with foam. That one, when I tried to check, just turned to dust and fell off. Is there a name for this roller? I just found the whole unit for sell, but not that foam roller. Maybe it's a simple foam atached to an axis, but I can't check its diameter anymore or the type of foam. Do you know where could I find it?
@sangokudbz79 Voltage breakdowns, or exposed drum. Either way, you need to replace the Drum Unit. If you have a printer next to a window, move it to another place after repair.
@@MrRicoh Yes I changed the drum and it works. I bought the printer from a guy that his father was deceased so the printer stayed unused for a few months at least, this was probably the cause
Tego typu regeneracja to super fuszerka, Jak można taką fuszerkę odstawiać, brak słów i jeszcze pokazywać innym w Internecie swój nieprofesjonalizm !
Pokaż mi proszę jak ty to lepiej robisz. Czekam na link do twojego filmu. Pozdrawiam.
Regeneracja ?
Rolki się w bardzo prosty sposób demontują. Wtedy je łatwiej wyczyścić. Po demontażu rolek można zdemontować listwę zgarniającą aby oczyścić śmietnik.
Dzięki to cenne uwagi
My drum makes some noise after replacing the OPC... Do I need to lube the shaft before pushing it through the OPC? 🤔🤷♂️
I tried to buy a new drum for my CLP-315 printer, but when I removed the drum to clean up and check if it was really necessary, I saw another roller behind it (this one was ok) and behind that roller, there was another one covered with foam. That one, when I tried to check, just turned to dust and fell off. Is there a name for this roller? I just found the whole unit for sell, but not that foam roller. Maybe it's a simple foam atached to an axis, but I can't check its diameter anymore or the type of foam. Do you know where could I find it?
@PetersonRBO The element you are asking about is the PCR Cleaning Roller, i.e. a roller covered with a sponge that cleans the charging roller.
it was informative but it didn't solve my horizontal lines problem
@sangokudbz79 Voltage breakdowns, or exposed drum. Either way, you need to replace the Drum Unit. If you have a printer next to a window, move it to another place after repair.
@@MrRicoh Yes I changed the drum and it works. I bought the printer from a guy that his father was deceased so the printer stayed unused for a few months at least, this was probably the cause
YOU NEED CLEAR THE UNIT BEFORE = REMANUFACTURE THIS UNIT. BECAUSE MAY BE , BROKEN THE UNIT TRANFER BELT, TOO... OK ?
Desafortunadamente, frase demasiado larga. Ningún traductor quiere traducirlo para mí. Reescribe usando un vocabulario diferente.
🔥🔥 UA-cam SUPPORT: ua-cam.com/channels/OHtXTtGHj33pUm8Gf2FH3A.htmljoin
dont you need to clean the drum waste toner?
I do not have to.
chyba brakło parę punktów do zrobienia :)
Ale o co chodzi?
np wysypania tony śmieciowego tonera z wnętrza? :-)
Comment nettoyer le drum
You cannot clean the Drum Unit. This must not be done. If the Drum Cleaning Blade does not clean the drum, it means that it is really worn out.
@@MrRicoh Can you replace the blade unit ? Is it easy ?