I’ve had no experience with doing a widebody but I remember TJ Hunt, when I used to follow him, saying he put a rubber liner on the edges of the kit the made contact with the car for a good seal and I thought it was a good idea. Keep up the amazing content Devin! 👌🏼👌🏼
absolutely love your content man, best out there. very informative and very detailed and on top of that you even show those small important details that many other channels forget.
defs favourite youtuber atm. currently doing up my lancer gts.. small starting due to small funds lol. keep up the good work dev love all your content!
I've been looking for something besides rivnuts to use becuase of the angle it would put the bolt in my wide body and this is just what I needed to find. Thanks man.
Did you have any issues with the tire rubbing the fender? Cause I recently cut my fenders for a widebody and I guess I didn’t cut enough since my back tires rub too much against the fender on bumps 😅
I've been thinking of getting these for my build but I'm worried they won't last for long. Would be awefull if a panel went flying while driving. How are urs holding up?
Two things. 1. I think it's time for you to do one of those Toyota Key fob changes into a nicer looking one haha. 2. I think it's time for a new intro. I do like that design at the end of the intro.
Yep! I recently purchased the "4 Button Remote Flip Folding Key Shell Case Cover" off on ebay/amazon for my scion frs (another 86 owner did this mod successfully) because I believe it was time for a change. If you decide to purchase one, you should do a video on it. Gives you the opportunity to provide long time revenue due to people wanting to know how to do it in the future.
clean bro, I knew you weren't gonna rivet it haha I might actually like those fasteners better than the downstar ones. Definitely using those when my rocket bunny comes in.
Damn I digging on that hardware set up them rubber nutserts are awesome! Have to keep me posted on how they hold up D. I've got a metal nutserts gun I'll use on stuff, but them rubber ones are way easier!
Not sure why, but watching you wide body your car is very entertaining
:)
I’ve had no experience with doing a widebody but I remember TJ Hunt, when I used to follow him, saying he put a rubber liner on the edges of the kit the made contact with the car for a good seal and I thought it was a good idea.
Keep up the amazing content Devin! 👌🏼👌🏼
Thank you!
absolutely love your content man, best out there. very informative and very detailed and on top of that you even show those small important details that many other channels forget.
the link doesn't work anymore. whats the size for the rubber nut? thanks
Did you ever figure this out?
defs favourite youtuber atm. currently doing up my lancer gts.. small starting due to small funds lol. keep up the good work dev love all your content!
I appreciate that!
How well did the hardware hold up years later.
were thz fenders already cut before or are they stock as in not cut down. because my country wont allow cutting into the fenders
Thanks bro just the video I needed to see helped a ton 🙏🏼
I love your work bro and thanks for sharing the information in detail.
Thank you man!
whats the point of the cleco clamps? just to hold them in place?
Bryant Jimenez google.com
How did it hold up years L8ter it’s 2022 ?
What kind of sealent do you use to stop the well nuts from spinning?
With this hardware would it only work for a widebody kit? Or could this method also be used to install sideskirts, bumpers and all? Thanks!
What kind ruber u use on the wide body kit
Where did the rubber washer and “grey washer” come from? Does the basic kit include those?
Do you have a updated list for the parts? Most of the links are not found.
What size were those cleclo clamps
I've been looking for something besides rivnuts to use becuase of the angle it would put the bolt in my wide body and this is just what I needed to find. Thanks man.
What size is the plastic washer?
The links u put in the bio dont work brotha.
Wait, so did you ever cut your fenders
Is it 13/64 or 16/64 drill bit to drill into the body kit?
Rim dimensions? Please and thank you.
Did you have any issues with the tire rubbing the fender? Cause I recently cut my fenders for a widebody and I guess I didn’t cut enough since my back tires rub too much against the fender on bumps 😅
Favourite you tuber atm
Thanks man!
Would this hardware work for a different car
Can u update parts plz
I've been thinking of getting these for my build but I'm worried they won't last for long. Would be awefull if a panel went flying while driving. How are urs holding up?
What size were those rubber washers? And where can i get them?
They came with the hardware from Zspec
Two things.
1. I think it's time for you to do one of those Toyota Key fob changes into a nicer looking one haha.
2. I think it's time for a new intro. I do like that design at the end of the intro.
You talking about the Toyota flip key?
Yep! I recently purchased the "4 Button Remote Flip Folding Key Shell Case Cover" off on ebay/amazon for my scion frs (another 86 owner did this mod successfully) because I believe it was time for a change. If you decide to purchase one, you should do a video on it. Gives you the opportunity to provide long time revenue due to people wanting to know how to do it in the future.
Good job it’s looking great 👍🏼
Thank you.
hey bro so I used the 3/8th drill bit for the rubber nuts. and they now fall threw the holes I made. is there a way to fix that ?
Edward Negron now you need a bigger nut for that size
Just gonna say well you clearly used the wrong size if they’re bigger. Get good kid
What kit is the wide body?
Are having the kit painted on the car? Or is it coming off when it's paint time?
Definitely pulling it off.
If you change the bumper will the kit still fit?
Depends on what bumper I went with.
I know this is an older video but I have a question. Is the 50/pk of hardware enough to cover both sides on the rallybacker?
Yes it is
Thanks for sharing, bin looking a while for the best fasteners to use....those are tops
So like would this would with any wide body ? Like on 240
Zenith no because it’s the same concept
clean bro, I knew you weren't gonna rivet it haha I might actually like those fasteners better than the downstar ones. Definitely using those when my rocket bunny comes in.
Man I love them!
Damn I digging on that hardware set up them rubber nutserts are awesome! Have to keep me posted on how they hold up D. I've got a metal nutserts gun I'll use on stuff, but them rubber ones are way easier!
quality quality! keep it up!!!
Thank you
does anyone know if widebody is functional or is it just for looks. by the way cool frs.
Functional in terms of being able to run super wide wheel/tire setup.
thanks
Good shit mate.
Thank You.
Look so sick bro
Aye thanks Luis.
I wish the hardware was smaller and not so big..
thank you!!!!!
3/8 drill bit just pulled my washers thru