After closing examination. Seems both way works fine but preferably the proper way you only see the back of board. What he did in video also worked fine.
on my V3 and also my V2 that is the correct way,,,and the x axis where the stepper motor is connected has a spur just for the Micro switch to make contact...
THANK YOU! for some reason my limiter switch cable wasn't long enough to connect the way they do in the video. Only until I found your comment did it reach far enough!
@@MauiRedMan actually, it's American companies who have products made in China and demand the lowest price possible is why products you know as "Chinese made" suck. I've worked with Chinese factories, have seen real products imported from China that are desired by Chinese Americans and they have a lot of pride in their craftsmanship.
@@lessthanahome So far i LOVE mine. have had i think.. 3 fails and 1 was cause an update on my pc when i had it hard wired. now i use the card solely. i do use a glue stick. that has eliminated All my end curl issues. i use Cura slicer now instead of the base software. Its so much fun.
I can let you know, I had to send one Back as there was numerous parts missing, my next one has arrived today, and I can see I have more items than the last one, ! Put the flags Out
@@anthonywells563 That's really unfortunately to hear. I didn't end up with any issues with mine. I wonder if they sent you one that might have been a return? If it was missing several parts that seems very unusual???? What did they say when you told them it was missing components?
I have the V2 and the V3...for me their is no major difference apart feeding your PLA or other material though the what I call the Feeder, but I am not to keen on the Material sensor, and where its placed, So I have changed the position and got rid of the sensor holder because of the noise of the filament slapping the rail....
@@anthonywells563 I hear you about the filament sensor. I decided to do a review of the machine that I had. The filament sensor was the very first mode that I ended up doing because of that as well.
I wish your instructions matched this tutorial. The end switch was in the orientation in the manual. The bed would not come up high enough. After flipping the switch around, I can now level the bed, but it is still too high up for my comfort, as it is very near max height. I expected more quality than that.
Hello, I have a Creality CR-10S Printer that I can't get to print. The z Axis goes up and down when homing but won't When Printing. It just stays on the first layer. Is this a printer problem or am i doing something wrong in Cura ?
How do u solve warping with this printer. All.printers I've used in the past were 220x220mm and glue sticks worked well with adhesion, but not with the cr-10 v3. Can u send some pointers my way?
Friend, pls check this link to buy www.creality3dofficial.com/search?q=mainboard, but you need to be clear which mainboard you should buy and which printer you have. Or you can also contonct our online service to buy from your local reseller. Have a nice day
Mine has been great....then terrible. Come to find out its NOT an all-metal hotend or extruder. They simply swapped out a problematic plastic idler arm for a metal one and called that an "all metal extruder kit". People like me come along and think theyre getting an all metal hot end or at LEAST an all metal extruder and therye getting neither. Mine wont print reliably above 240C (which is everything I need to print) so its basically junk to me. The hot end isnt an E3D. Its a clone with a shorter heat sink so there are no easy "drop-in" options I'm aware of. Its starting to look like major surgery replacing the entire print head because I suspect the extruder is not a genuine E3D either. Taking it apart it looks like a meth addicted monkey put in the threaded brass inserts that hold the print head together. Also, the part cooling ducts are melting after 6 weeks of use printing nothing hotter than PETG. If you cant tell, Im super UNIMPRESSED with my CR-10v3. I have an email into customer service so we will see what they say. I can tell you if I have to buy a whole new printer it will NOT be anything from Creality.
James Harrott I had the same at first I dident see it but I had so many things that needed Tightening I just missed it, Don’t post anything about it on the Facebook Creality site I did and the answers I got from a lot of the was unbelievable It was just like a HANGING posse! I haven’t Been back on it since.....happy printing
@@anthonywells9435 Other than that issue, I've been pretty happy with the machine so far. There are certainly some decisions made by Creality that I don't understand, but I knew about those pre-purchase. All of the Chinese 3D printing companies have shamefully poor customer service. These are very DIY.
Watch out the official website (the real official one). I ordered when I got email saying v3 ships with 3-5 days. Got shipping number on day 3, good. And now 12 days passed since then, nothing is shipped. No place you can trust nowadays
I ordered from the official website and it took over a month to get my printer. There was no information on their tracking system and every time a contacted support they would just ask me to be patient, it was not a great experiance.
@@victormolina5745 you do know a month ago the V3 was only "PreOrder" and it wouldn't even begin to ship till July 5th. It said that clearly on the website. I just recieved mine today july 15th so about 10 days shipping time.
Try fixing the printer you all have created and perfect them before just throw caution to wind and just create random prints and mods for printers that are not ready to go to market and have a bunch of bugs to iron out . But I know you rather take eveeryones money and consider those issues to be there problem. Your customer service sucks . I would I’ve it a -10 out of a 0-10 scale. Thank your customer solutions I would also say sucks give. A -10 out of 10 . You should care more about the customer then your bottom line all the time. Eventually people will get tired of your sloppy service and move on to bigger an db Tyler things like myself. I have been nothing short of a loyal customer and only used creality prints in my print farm and that was suck a mistake cause if you have any issues once you get your printer it’s your problem now and that’s just the truth . They will avoid you like the plague to get you out tod there return window of 30days which is what they did with myself . I had purchased 10 creality printers in the last 3 months 3 ender pros/ 2 cr10 v2/3 which the V3 is a nightmare I still haven’t been able to use it as the printer came in not working properly. Then you want people to dance for you and jump thur hoops to get you videos which were provided and then the problem you said I have is not the hotbed . And then 3 days later you tell me oh we are gonna send you a hotbed when you told me it wasn’t the hotbed it’s the control box 🤥🤔 then I told you I didn’t want any parts I just want a return label and refund . I send emails to every existing email address attached to creality and all of them did nothing for me but have me waste my time and continue to tell me how the part is coming in that isn’t even going to fix the problem 🤭🤭🤭 I would be ashamed and embarrassed if this was my company . You all shouldn’t even sell your products give it to v nodes who actually know how to operate a store front or e-commerce site and you let others sell and provide the customer service as you all have proven time and time again I have well over 50 emails with 3 different incidents and I am still waiting on a silent board which was suppose to be refunded after I was sold it in stock and had to wait and email you guys after a month of wondering why no tracking oh wait cause you took my money and wanted me to want around and eventually when I reached out then you would make me aware that they are out of stock and have no idea when they will ship out. I ordered this silent board April 5th still have nothing and no tracking and no refund . Great job Creality !!!!! 👍👍👍👍👍👍👍 great great job
Z-axis limit switch (the call it "limitED switch) installing at 5:34 shown COMPLETELY WRONG WAY.
Oh my god. Thank you. Looked at manual and changed. Thankfully I saw this message.
@@kibbycabbit just noticed this and was going to post something - maybe its worth editing the video or putting a note on there... !!!
After closing examination. Seems both way works fine but preferably the proper way you only see the back of board.
What he did in video also worked fine.
on my V3 and also my V2 that is the correct way,,,and the x axis where the stepper motor is connected has a spur just for the Micro switch to make contact...
THANK YOU! for some reason my limiter switch cable wasn't long enough to connect the way they do in the video. Only until I found your comment did it reach far enough!
Just picked one of these bad boys up. My first 3d printer. Can't wait to set it up.
Why the hell would you have advertising in the middle of your instructional video? I don't think this is the place you need to make ad revenue.
We need to see more reviews of the V3 in the wild.
Here's a review its Chinese it sucks
And their advertisement is probably false advertising anyway
v3 was my xmas gift. putting it together now. id love to see more Non fucking ender 3 reviews. jesus.
@@Isaiah42069 I'm putting mine together now
@@MauiRedMan actually, it's American companies who have products made in China and demand the lowest price possible is why products you know as "Chinese made" suck. I've worked with Chinese factories, have seen real products imported from China that are desired by Chinese Americans and they have a lot of pride in their craftsmanship.
@@lessthanahome So far i LOVE mine. have had i think.. 3 fails and 1 was cause an update on my pc when i had it hard wired. now i use the card solely. i do use a glue stick. that has eliminated All my end curl issues. i use Cura slicer now instead of the base software. Its so much fun.
I would like to see some reviews from Maker Muse, Teaching Tech, Tom Sanladerer to find out how it compares to the previous version.
+1
I can let you know, I had to send one Back as there was numerous parts missing, my next one has arrived today, and I can see I have more items than the last one, ! Put the flags Out
@@anthonywells563 That's really unfortunately to hear. I didn't end up with any issues with mine. I wonder if they sent you one that might have been a return? If it was missing several parts that seems very unusual???? What did they say when you told them it was missing components?
I have the V2 and the V3...for me their is no major difference apart feeding your PLA or other material though the what I call the Feeder, but I am not to keen on the Material sensor, and where its placed, So I have changed the position and got rid of the sensor holder because of the noise of the filament slapping the rail....
@@anthonywells563 I hear you about the filament sensor. I decided to do a review of the machine that I had. The filament sensor was the very first mode that I ended up doing because of that as well.
I'm glad you didnt build my printer. You installed the z limit backwards
thank you
I wish your instructions matched this tutorial. The end switch was in the orientation in the manual. The bed would not come up high enough. After flipping the switch around, I can now level the bed, but it is still too high up for my comfort, as it is very near max height. I expected more quality than that.
Hello, I have a Creality CR-10S Printer that I can't get to print. The z Axis goes up and down when homing but won't When Printing. It just stays on the first layer. Is this a printer problem or am i doing something wrong in Cura ?
Are the y steper plug suppose to move mine seems to be okay but I moved it a tad while trying to plug it in some of these cables are hard to reach :(
Check all screws , mine came with completely loose one side motor
Same i had a loose screw that fell out trying to find out where it goes...
Same here .. loose or lost screws. Cracking extruder..
will the cr-x pro be available again? (or newer version)
My control box won’t turn on, any suggestions
Why do you have adds on your manuals???
This video made me want to return the product
I have a CR-10 V2 .... should I junk it and buy the new CR-10 V3 ? or the 6 SE Max ? Asking for a friend.
why junk it? :D
Bought CR10v2 bout a month ago.. -.-
someone link me to removing and cleaning the extruder?? Thanks
There is an orange film under the build plate. Is that left on?
not really
You installed the limit switch wrong in this tutorial 😅
And a couple other things
I did it this way because cable had no slack to fit the other way. Auto home worked fine.
It looks like its catching up to my ADIMLAB Gantry Pro. It has the extra braces which my Gantry Pro does not need as it has metal corner braces.
You Think If We're Watching This, we ALREADY BOUGHT ONE, Or Shopping.
Do YOU REALLY NEED AN AD IN THE MIDDLE OF THE VIDEO?!
How do u solve warping with this printer. All.printers I've used in the past were 220x220mm and glue sticks worked well with adhesion, but not with the cr-10 v3. Can u send some pointers my way?
Quelqu'un sais ou trouver la carte mère....??? La mienne est déjà fatiguée 😫
Friend, pls check this link to buy www.creality3dofficial.com/search?q=mainboard, but you need to be clear which mainboard you should buy and which printer you have. Or you can also contonct our online service to buy from your local reseller. Have a nice day
How did you get the filament into the filament sensor so easily? The damn thing won't fucking go in, and hella other people have problems with it.
One of my filaments wouldn't go into until I trimmed the tip. It must have been flared or blunted.
Где на него запчасти купить?
I just got the cr-10 v3 and the z want move (
interesting. auto home disable steppers, release, bed 3/8 inch from nozzle.
Hi Shay, do you have any questions? welcome to contact us :)
@@Creality3D almost got it level, it's been a minute 😂
@@shaywarren what did you do? i just downgraded from ender 5 and cant find a Z offset option
Why does the direct drive extruder click?
Can we print LW-PLA in this platform
sure
@@Creality3D but still this is not available in India please forward this product via flipkart
This machine should have auto leveling, the technology has been implemented on cheaper ender printers and newer cr printers, why not on this one???
they want you to Purchase it because it is a add-on and it costs enough any way!!!!!
@Juan Suero the print surface of the other one is smaller and too small for my requirements
Mine has been great....then terrible. Come to find out its NOT an all-metal hotend or extruder. They simply swapped out a problematic plastic idler arm for a metal one and called that an "all metal extruder kit". People like me come along and think theyre getting an all metal hot end or at LEAST an all metal extruder and therye getting neither. Mine wont print reliably above 240C (which is everything I need to print) so its basically junk to me. The hot end isnt an E3D. Its a clone with a shorter heat sink so there are no easy "drop-in" options I'm aware of. Its starting to look like major surgery replacing the entire print head because I suspect the extruder is not a genuine E3D either. Taking it apart it looks like a meth addicted monkey put in the threaded brass inserts that hold the print head together. Also, the part cooling ducts are melting after 6 weeks of use printing nothing hotter than PETG. If you cant tell, Im super UNIMPRESSED with my CR-10v3. I have an email into customer service so we will see what they say. I can tell you if I have to buy a whole new printer it will NOT be anything from Creality.
Make sure to snug up the print head! mine was crazy loose!
James Harrott I had the same at first I dident see it but I had so many things that needed Tightening I just missed it, Don’t post anything about it on the Facebook Creality site I did and the answers I got from a lot of the was unbelievable It was just like a HANGING posse! I haven’t Been back on it since.....happy printing
@@anthonywells9435 Other than that issue, I've been pretty happy with the machine so far. There are certainly some decisions made by Creality that I don't understand, but I knew about those pre-purchase. All of the Chinese 3D printing companies have shamefully poor customer service. These are very DIY.
Watch out the official website (the real official one). I ordered when I got email saying v3 ships with 3-5 days. Got shipping number on day 3, good. And now 12 days passed since then, nothing is shipped. No place you can trust nowadays
Please provide the order number and the link to the website where the printer was purchased, thank you.
I ordered from the official website and it took over a month to get my printer. There was no information on their tracking system and every time a contacted support they would just ask me to be patient, it was not a great experiance.
@@victormolina5745 you do know a month ago the V3 was only "PreOrder" and it wouldn't even begin to ship till July 5th. It said that clearly on the website. I just recieved mine today july 15th so about 10 days shipping time.
Ok and something really about innovation?
My printer pauses instantly
What could be the reason?
Filament runout sensor not connected
CR10 V3 already?
Stop beta testing machines and then releasing fixed versions.
I'll Pass
Try fixing the printer you all have created and perfect them before just throw caution to wind and just create random prints and mods for printers that are not ready to go to market and have a bunch of bugs to iron out . But I know you rather take eveeryones money and consider those issues to be there problem. Your customer service sucks . I would I’ve it a -10 out of a 0-10 scale. Thank your customer solutions I would also say sucks give. A -10 out of 10 . You should care more about the customer then your bottom line all the time. Eventually people will get tired of your sloppy service and move on to bigger an db Tyler things like myself. I have been nothing short of a loyal customer and only used creality prints in my print farm and that was suck a mistake cause if you have any issues once you get your printer it’s your problem now and that’s just the truth . They will avoid you like the plague to get you out tod there return window of 30days which is what they did with myself . I had purchased 10 creality printers in the last 3 months 3 ender pros/ 2 cr10 v2/3 which the V3 is a nightmare I still haven’t been able to use it as the printer came in not working properly. Then you want people to dance for you and jump thur hoops to get you videos which were provided and then the problem you said I have is not the hotbed . And then 3 days later you tell me oh we are gonna send you a hotbed when you told me it wasn’t the hotbed it’s the control box 🤥🤔 then I told you I didn’t want any parts I just want a return label and refund . I send emails to every existing email address attached to creality and all of them did nothing for me but have me waste my time and continue to tell me how the part is coming in that isn’t even going to fix the problem 🤭🤭🤭 I would be ashamed and embarrassed if this was my company . You all shouldn’t even sell your products give it to v nodes who actually know how to operate a store front or e-commerce site and you let others sell and provide the customer service as you all have proven time and time again I have well over 50 emails with 3 different incidents and I am still waiting on a silent board which was suppose to be refunded after I was sold it in stock and had to wait and email you guys after a month of wondering why no tracking oh wait cause you took my money and wanted me to want around and eventually when I reached out then you would make me aware that they are out of stock and have no idea when they will ship out. I ordered this silent board April 5th still have nothing and no tracking and no refund . Great job Creality !!!!! 👍👍👍👍👍👍👍 great great job
That’s what you get for buying direct and not through Amazon, any problems, return it. Duh?