Це відео не доступне.
Перепрошуємо.
33 Inch Tires NO LIFT! Toyota Tacoma | Method Race Wheels | Nitto Ridge Grapplers (THE RIGHT WAY)
Вставка
- Опубліковано 4 тра 2024
- In this video, I show how I was able to fit 33 inch tires on my 3rd gen 2021 Toyota Tacoma with no rubbing! The combo i used in this video is a set of Method MR309 Grid Matte Black 0mm offset Wheels wrapped with 285/70R17 Nitto Ridge Grappler Tires! Hope this video helps you to be able to fit your wheels on your Tacoma!
You should of been able to adjust the caster via the lower control arm to get the necessary clearance from the pinch welds. I believe stock it is set at 2.4 degrees and you can move it to about 4.5 degrees (but 3.5 you should be good) which results in the wheel moving a 1/2" forward.
First, your way of checking clearance is the best so far on UA-cam. I had a question tho, why cut so high on the plastic? I want to do the same, get as much clearance that does t rely on a lift. Thanks! 🤙🏼
The only reason I cut so high is because the mounting clips are there. I didn’t want part of liner hanging down and possibly get blown around by driving on the freeway
Makes sense!
Get this man a lift kit!
What year is ur Tacoma I’m ordering u a leveling kit 2in
Title should say “no rubbing after minor modifications”
Ughh bro, but crap is gonna get everywhere in places it ain’t supposed to go.
OR……. Put on 255/85 R16’s
This is what I’m considering, it’s only 10mm narrower than my 265/75/R16 and honestly with 0 offset wheels they poke out past the fender a bit and throw shit. It looks nice, but pizza cutters, lift, SPC upper control arms I’m hoping a 255/85/R16 could be run without cutting anything at all?
Also wish there were more 255/85/R16 options. No K02 or K03’s iirc.
You can buy a lift for a few hundred bucks. No need to hack your truck to pieces and ruin the resale value.
NOT BIG ON COMPREHENSION A?