So Many Glock Triggers These Are My Top 3 For Now
Вставка
- Опубліковано 23 лип 2024
- Complete Parts List Here ► bit.ly/49FpVUI
Patreon
/ tacticalconsiderations
Shirts/Hats TriStar Trading
bit.ly/3Tt4wcW
Favorite Ear Pro Of All Time
bit.ly/3qvk7Kq
Email List Sign Up!
bit.ly/3umhue8
All filming done in a safe manner on a bonafide public range under the supervision of licensed and certified professionals featuring legal items only. All Federal, State and Local laws were followed during the course of all filming and productions of this content.
#tacticalconsiderations
** Affiliate disclaimer:
We keep Tactical Considerations going in part with viewer support in the way of paid links/affiliate links. Some of the above links maybe affiliate links, which may generate me a sales commission. For example, Camera Gear I Use listed above is in association with the Amazon affiliate program and I’m an amazon associate.. "
I’m building a G47 Gen 5 MOS. Have the Timney Comp trigger. Holosun SCS. Streamlight TLR-1HL. Magwell ring. Glock Store slide plate. Extended slide lock. Just from watching all your videos. I wanted a G17, but noticed the barrel swap for the 19 and 47. Now I have both and now I got 4. Having 1 is none, having 2 is 1.
I wish Glock had done the G47 route years ago we would all be in a better place lol
I only have experience with the Hive Technologies Monarch trigger. It has been an amazing trigger. Zero take up, crisp break, short reset. It is adjustable so I was able to fine tune it. I have used it in my conceal cary piece for about 5 years with no issue.
I actually don't own one of those.
@@TacticalConsiderations I decided to buy another glock over several other options due to that trigger.
I have that trigger too. It’s definitely underrated and never mentioned in trigger videos. Zero grime, defined wall. Crispy and smooth for sure 👌🏼
You were absolutely correct about the new Timney Glock trigger! I tried a bunch of different ones, but my gen 4 g19 loves it!
It's crazy different
Lots of problems with my timney
@@fotofavoloso267mines shooting binary😮
There are other systems out there. I had a G34 G4 come in from Yeti, which I customized some more. It had a Zev trigger, but no corresponding bar. A Ghost system made it smooth.
Oh there are tons for sure.
Is the 3rd or 4rth time i watch this, dude your reviews are outstanding, the passion for guns you print in these videos is amazing, keep it on ! great channel !!
Thanks for watching. These are the fun ones to make.
I just got my first pistol this month and was advised to change out the trigger system. Your channel helps me immensely figure out what to get. Thanks a ton dude. I’ll have to buy some of your merch to return the favor. You kick a$$.
I appreciate tat but always remember since its your first training is more important than parts.
I'm from Brazil and I watch all your videos, they are excellent. Unbiased videos without purchased and sponsored content, because here in Brazil we do not have serious content, here we speak well what they pay you.
Thank you very much for the real content.
Glad you like them! Crazy that's how it is there. I have some sponsored videos on here but 90% are self financed by me, myself and I.
This video couldn't come out at a better time. I was just looking at different triggers for my new 17 MOS last night, and now this comes out. I've about made the decision to go with the Overwatch, due to your last top 3 and review on it, so let's see if it stays at the top!
Solid choice .
@@TacticalConsiderations just ordered the Overwatch Poly DAT, based largely on your recommendation. I tried to use your link on your website, but it isn't working right for some reason. In case anyone is interested, they are offering a shoe only model now, and it's only $39.99!
How do you like the overwatch now? Has it held up?
@@drepop803 still going strong. Feels and shoots just as crisp as it did when I first got it. 100% good to go.
Great overview on the triggers.
Try a '+' connector with the Timney. It will raise the pull weight and give it real solid wall.
That’s what I use and the break is awesome 🍻
Thanks. I'll be tinkering around with it
Where/how do you get the + connector?
@@scrubly_jr glockstore or rockyourglock usually have them. It is the 8 lbs connector.
I recently installed Factr triggers on my 43x and 45. There is a defined wall but feels like tons of creep till the break (like 1/8” on the 45 and 1/12” on the 43x). Overall I’m happy with the overall reduction in pull weight and the shoe is fantastic but the creep till break I definitely didn’t expect based on your reviews. I’ll head to the range with them tomorrow and decide if I’m happy or not with the post-wall travel.
yeah update me for sure on those. There is a little but its should be right at the overwatch trigger amount. Do you have a factory or aftermarket connector?
@@TacticalConsiderations the 43x has the np3 minus connector from overwatch. The 45 has a stock (dot I think) connector. I’ll keep you posted!
@@TacticalConsiderations overall I’d say I’m happy. The g45 was smooth as ever and I already performed well with it stock. The 43x is still going to take some getting used to but the trigger has been lightened which it absolutely needed as well as the flat shoe. I was able to get Factr triggers for much cheaper than the other brands so I’d say I’m set. Thanks for the recommendations!
Anytime
Thanks brother - needed a new trigger and your info was invaluable
For sure. Hope you find what you need.
Overwatch is my go to trigger. I’ve got the Timney and love it but that’s in my range only G17. Apex is next in the list for sure.
Solid choices Pete.
I’m happy with my factory G45 trigger .. I’m still new so I am focusing on trigger control.
There is nothing wrong with that. Proficiency is definitely where to focus when first getting into something new.
After many years I broke down and got 2 Glocks. The reason for not having a Glock all these years is because of the triggers. I got a 19 X and a 45 Gen 5. I never shot them until I put the Timney triggers in both. I did have trouble right off, the trigger return spring was a little to weak to return the trigger. Timney really step up and sent me some stronger ones. All I can say is after about 500 rounds is NICE, VERY NICE. This is a game changer for these guns. Both break a little over 3 lbs. I took out the pretravel out of one, this should only be done on a range gun and not for carry. I am talking about WOW, just a little pressure and bang, very little reset and off again. I can only speak for the Timney triggers as I have never tried any others but they are great. Timney was very fast and helpful and sent me the needed spring express mail they have great customer service.
Very nice. I am wondering if I got stronger springs out of the gate .. Mine have not experienced the weak reset but then again all of mine are very well broken in.
Find a court case where trigger modification got someone jail time?
I believe it’s less about the actual shoe and more about the inner workings! Take Johnny Glock‘s for example you could send him just about any shoe on a GEN three bar and he’ll make it behave however you want it too it’s more about the builder! And not a lot of people can design a Glock trigger that’s 3 pounds without changing the striker spring but I’ve managed to pull that off! No light strikes in my Glocks! Lol good overview on different shoes though! I truly just buy the shoes for looks and finger feel “Thats what she said” and leave the rest up to Johnny or myself.
yes the shoe is a tactile thing but its also where the angle change is for the interface of the front of the trigger bar that changes take up. This can be done on a stock shoe with an adjustable screw as well.
Good information!
I carry a G22 for duty, but prefer .45ACP so my carry pistols are either a G21SF or a G30S (which can use G21 13-round mags) and am looking for a replacement trigger, and this video is a good starting point for my research!
- RLTW 2/75
On the G21 I use the Overwatch Poly-Dat. Price, safety, and performance are excellent.
Oh man my 30 has been in the safe for a long time. Be safe . RLTW!
@@jasonschmidt9569
I think that I'm going to buy their TAC Trigger
@@TacticalConsiderations
Good EDC pistol!
FYI: I think that I'm going to buy an Overwatch Precision TAC Trigger
I have a 30s , qhat trigger do you think are the best for edc new follower
Had a major issue with the overwatch unit.
The trigger shoe pivot point is 1/8” smaller than the OEM Glock unit. This allowed for a considerable amount of side to side play in the shoe, which would allow my slide stop lever to ride up and cause the slide to lock back with a full magazine. Apex or zev did not do this. Something to note and maybe mention next time.
None of mine are like that. However, I asked around apparently there has been a re design of the shoe to make the shoe usable on all gens with the change only the bar I am assuming to cut production costs.
@@TacticalConsiderations that’s very interesting. Swapped it out for a Apex unit and haven’t had an issue since. Very weird.
@@test15799 What Gen do you have?
Great timing for this vid. Cleared up whether the honorable mention would be good for EDC.
Glad you liked it
Glock 19 gen 5 mos with the overwatch precision polydat trigger with a ghost minus connector was pretty decent. Defined wall with a little more over travel than I would like. The feel was good however my finger placement wasn’t consistent.
Recently replaced with apex trigger and trigger bar with ghost minus connector in the g19 gen 5 mos and I love it! The red shoe is nice contrast. The wall is more defined. Nice crisp break. Very little take up. However, there is still some over travel but not a deal breaker and I think the g19 just has those tolerances. The weight is definitely lighter and sometimes it outshoots me lol.
Will be trying the overwatch tac trigger and bar soon on a g43x mos. Will update. So far, can’t go wrong with the apex!
Nice set ups. The glock trigger are tough to get rid of overtravel without putting in a screw in the trigger block to stop the bar from over travel but that's a big change in the pistol
Great video. That overwatch tac trigger is still my favorite with the NP3 striker, minus connector, and safety plunger all Glock Oem parts just NP3 coated. If I get more time with the timney and comfortable with how easy it is to break through that glass rod like wall my opinion may change. I think with the right tweaks that may be fine for EDC too but out the box I’m just not comfortable with it. Did you install and use Johnny’s kit for it yet? If so what’s your thoughts 💭, happy Easter to you and the wife btw. Hope it was a good one
Hope you had a great weekend too McNuggets. I do really like the Overwatch. Its tough to narrow it down with all the good options.
I'll probably edc a timney when I get my dagger in, I'm use to 1911s so its totally fine to carry
Thinking about going with the new Timney more and more 🤔
Just what I was looking for . Thank you sir .
You are most welcome
I put a polydat in my g43 to really just get a flush trigger safety. I really didn’t expect much but damn I’m impressed. I typically stick with apex Glock triggers but I might try out another overwatch when I get another Glock.
Glad you liked it.
Overwatch has been my go to for a while, but I’m really starting to dig these Factr triggers. I love them
They are very similar in performance for sure.
how did you get past the fact that their trigger shoes are too narrow to fill the space in the receiver and allow a lot of slop on the slide release?
@@abcdefbcdefg8352 I have never noticed that on any of mine
I installed the Johnny Glocks combat trigger today. I am a mechanical doofus but managed to do it. It does not seem any lighter, but eliminates the mush and creep and shortens the reset.
Its a great trigger.
Hate to say it but the factr was a no go on my gen3 g19. The vertical extension is too close to the the safety plunger. When I push back on the trigger without pressing the safety tab,the vertical extension slightly depresses the plunger. I don't know if it will be enough for the striker to move but I don't feel safe with it. They took out way too much pretravel.
Interesting that should not be happening with this trigger.
I love my Factr trigger! Only purchased it cause of the knowledge you shared with us. Great video as usual. 👍🏼
Glad you dig it
Just love this channel!!! Just got my Free yes FREE Glock G45 Gen5 that I WON in a raffle from C2 my local shooting range. It cost me 142$ total since I got the MOS cut and the Ameriglo Bold Night sights. Should have gotten some suppressor night sights but the optic is still a ways away!! Looking to drop in a new trigger ASAP!!!
That is awesome you won the C2 giveaway. Hope you enjoy it.
You knocked it out of the park with this one. Thank you!
Much appreciated
Love your videos! So informative.
Thank you
Awesome! Been waiting for this video. Great video per usual!
Glad you liked
Great content as always my brother!!
Appreciate it! Nothing like some trigger action.
I am filing the trigger safeties on all my guns to make them flash, when pressed, with the trigger ! Supper comfortable after that and free!! Its plastic molding so little sharp edges is always to be expected but never a reason to spend hundreds for upgrades ;)
They can definitely be smoothed out.
Great video, I just ordered the Timney trigger based of the review you did on it. What magwell are using on that same gun with the Timney trigger?
That the steel city
If I ever decide to use a non-stock trigger in my g45 it'll have to be one by Johnny Glock...that man's a wizard.
He is I have his video coming out soon
After several hours of frustration and phone calls to Timney, my Gunsmith gave up trying to install the comp trigger into my stock Glock 19 Gen 4. However, he did test installing it in his Glock 19 Gen 3, and it installed and functioned perfectly. Timney indicated on his last call that Timney had incurred some defective parts in their mfg. process causing issues for installations for Gen 4 pistols. Since I wasted $$ with the Gunsnith attempts I sold the Timney kit to him at a discount. I plan on my future purchases with Mcarbo in the future since I've incurred no previous issues with their products.
Interesting I have it in a few but I didn't experience that. Been a while since a got a new one though for testing.
My factory Glock P80 GEN1 Lypseys exclusive has a really good trigger that has pretravel that I don't mind but hits a very hard wall then breaks heavy with absolutely no creep like breaking glass. I have a bunch of Glocks & they all have a little creep but I can't figure out why the P80 came from the factory this way but I ain't complaining. I'd suggest trying Glock triggers before you buy cause there are some that just come out with a great trigger. Hickok 45 says he tries out triggers before he buys & he doesn't like gen5 triggers cause they're " mushy" & he finds the gen3 & 4 triggers are crisp & have a glass break on some but most have creep.
I get ya I've had over 2 dozen glocks of my own and at work have tested at least 100 more none had great triggers out of the box . Glock Triggers aren't terrible the design just is what it is
Have had a Johnny Glock trigger on my G45 for several years and love it.
They are amazing.
@@TacticalConsiderations Yes, and Johnny is a really cool guy and will take your call and help with any issues.
@@TacticalConsiderations On another note, if you have not heard of or reviewed the Dry Fire Mag, you should get in touch with those guys and have them send you one. I just got one yesterday and it is really nice, especially if you get the spring kit so that you can more closely match your trigger. They have been around for awhile, not sure why I just heard about it a few days ago! Been dry firing my G45 with it like crazy ever since I got it.
Overwatch precision trigger is amazing especially pared with polished internals and a minus connector make my duty pistol amazing.
I agree
yah, i like loose parts in my trigger too...
Great review on the triggers, I have Timney triggers my LG‘s excellent Chris and clean Pulls
Good choice!
I like the Johnny Glock trigger’s. Work very well, nice feel
JG triggers are so good ..
Good info.
Nice video.
My favorite Glock is a Gen2 31. Stock trigger with Ghost connector and Wolff springs.
I'm surfing videos because I tried that same setup on Gen4 41 and didn't get nearly as nice a trigger.
Much appreciated.
My favorite is a 3.5 ultimate connector by ghost and updated 6lb heavier striker spring. Has a defined wall due to the spring and the connector takes out the mush.
I have seen way to many problems to ever trust ghost.
How many rounds did you fire with each one during testing? I have two Tactical Pontoon triggers and after about 100 rounds the pins came out on both of them. I lost the small spring that keeps the safety up so I no longer use these two. I liked them until the pins came out. They sent me a replacement shoe for one of them but then the same thing happened. Now I just use Apex.
Various amounts some have a couple hundred some several thousand.
Because of your reviews I'll go with slr magwell and now timney trigger, but you do not recommend it for edc. Wich one do you suggest? Thanks for sharing all this knowledges. Very happy your channel finally is growing up and take a position that really deserve it on yt! 💪🏼
The slr magwell is great for duty. For a glock trigger for say work or duty carry the overwatch is my first choice to fill that role.
@@TacticalConsiderations I've just watched your video about polish glock trigger. I'll buy a rotary tool and try it first.
Saddly I don't have a "trigger pull scale" to measure it, but I'll it anyway. Cya
Hi, I am doing a p80 glock 23 build and I was wondering what magwell you are using on your p80? Thanks for the trigger review by the way. I have been researching triggers for days for this build.
There isn't a magwell for a 23 that I now of.
I've only tried overwatch and apex so far. Overwatch terrible experience, but apex does the job. I only changed the trigger bar. I don't mind the standard glock pull weight.
The reason being you don't need to fish for the reset. You loosen your trigger finger a bit and it just kicks you out back to the wall. It's easier to follow up when you don't need to search for the reset. At least for me.
I hate when people complain about glock triggers as if they're built to run competitions out the box.
Jesse hat was the issue with the overwatch , was it the poly version .. I just got word there apparently has been a design change. As for the Glock trigger its def not a competition runner but it was designed the way it is for safety and to allow a wide variance in tolerances. but sounds like you already know that.
@@TacticalConsiderations lmao really? Yeah it was that one, I told them the shit didn't work. It would kick my trigger pin out. The slide stop wouldn't sit flush against the trigger shoe. It sat like this \ instead of straight up and down. trigger pin was sticking out about 1/16th on the right. Plus my slide stop was sort of digging into my frame.
I told them this, I sent them photos of both the stock trigger and their trigger installed. They ignored all of what I said "You installed it wrong." Immediately it's not us it's you routine. Which I replaced it with the stock to make sure I wasn't crazy. Then reversed it again. It wasn't my fault, that was clear. How hard is it to switch a trigger on a glock right?
After comparing the 2 it was clear their trigger had far too much missing material where the slide stop sat. Good that they finally changed that though.
I could careless for them, but at least future customers will probably get a better product that actually works. For the record it felt good, it just was worth a shit fitment wise. On top of the trash customer service, which really sealed the chance of me ever returning. They also made me pay return shipping, which just irritated me even more.
But Apex is great, going to grab another. I didn't know timney made glock triggers I see alot of their AR triggers though. Johnny glock used to pop up in my recommended but I completely forgot about it until now. Gonna need to try those 2 out sometime.
The change is from the full body to the version you had issues with mine are the previous gen to yours. I'll have to get the new one and inspect it
@@TacticalConsiderations Please man, tell me what is going on here! I ordered the Overwatch polydat, shoe only, cause that’s all they have. And I bought directly from them. Am I going to have issues in my Gen 4 Glock 10mm?
APEX for the win! Completely blown away after I installed one in my Glock 43x. The Red it comes in just pops!
for sure apex is solid .
How did you get rid of the mushy feel ? I just bought one for my 43x and the take up is super mushy.
@@esavanessa I actually swapped it out for Overwatch Precision
@@ProtectiveDadPranks thank you for replying!
What are the differences you’ve noticed from apex and overwatch?
@@esavanessa - Overwatch way more crisp. And the finger tip notch assists with perfect index finger placement every time!
How is the Hyve Monarch stacking up to these in late 2021... getting an OP trigger kit (or one with the pre-installed trigger bar) is like mining for bitcoins in antarctica right now. Also, now that the sole distributor to the industry for NP3 coating has discontinued the service, what is a good alternative (aside from high polishing)?
I don't own a Hyve man. Stuff has been hard to get ahold of for sure.
Threw a johnny glock combat trigger in my 43x. I love it.
His triggers are next level
@@TacticalConsiderations no doubt, he's The Glock Whisperer!
I have the same in my gen 5 love his stuff. Always pulls 3.5 Everytime
Hell yea
I have gotten a lot of his triggers in the past. Almost zero creep.
Boy how I missed ya guys! But I’m back just got a G17 MOS ordered a timeny trigger for it
its a whole new world.
As a guy that plans on installing a glock safety mod, that honerble mention looks really nice.
They are all pretty solid.
Big Mike, you are doing great reviews brother 👍👍👍👍👍✅✅✅✅✅
Thanks Mark I appreciate that
I'm in the middle of a competition build, G34 limited division, I've had good experience with Zev fulcrum trigger, would you put Timney over the Zev for competition purposes? I've heard and read a bunch of good things about the Timney but never tried one. Any feedback would be awesome as I am planning on finishing my build in a couple months.
Thank you and awesome quality video man! Looking forward to watching more stuff.
The timney is definitely a great choice for competition it a way different feel than any standard designed glock trigger.
im a certified gunsmith and licensed FFL dealer, i work on alot of glocks i mself have tried my share of triggers and so far my favorite and price friendly is the Glockstore pyramid ultimate trigger comes with everything you need and comes with 4 different striker springs and it has a wide choice of colors and color combinations
The Lenny Mcgill special.
I have the Pyramid 2 in my G 43x and have no problems with it. The first time I shot with the factory trigger, I put a box of 50 through it over 2 hours and my fingertip was screaming an hour later!
I'm telling ya, my dude...Apex w/ 6lbs striker and trigger springs, unmarked disconnector... breaks like a duty 1911. Weightless take-up. Really solid pre-break wall... try it with a + connector in the Nomad...oof.
I've been playing with the striker springs on them all recently. Cci primers are the only ones I've seen problems with at this point
@@TacticalConsiderations thats why I use the 6lbs by Ghost. 1/2lbs heavier than stock.
Could i get your opinion(s) on the zev pro flat faced drop in unit? Ive always been an apex guy, but decided to try the zev since they have been around a while... any thoughts or things you guys have found with the zev?
I have had some good luck with zev and some not great luck with zev. I dig the magwells and such but trigger wise its been a long time.
Great video and channel, Bud! I’m new to firearms and I just picked up the G43X. It’s a great reliable gun, but the factory trigger is HORRENDOUS. Just after my first 100 rounds, it was already eating up my finger😖
I was wondering if you would have some recommendations on which tigger I should run with? I think i have the same likings to what you look for in a glock tigger so it would help me a ton!! thank you for any feed back.
I like the overwatch.
have you tried the Rockyourglock phantom adjustable trigger or the innovative gunfighter solutions trigger?? I'm trying to decide which to get
I have not used those
Love it bud, about to hit pay now on Overwatch Precision 72.00 + tax today Primary Arms
Overwatch has been a good set up..
I have an Overwatch Precision Poly dat trigger in my Glock 21SF...I love mine and am getting another on for my Glock 19.
its the best overall cost and performance in the game right now.
Good video as always brother stay safe out there
Thanks, you too!
Empire Stiletto trigger is awesome too, I got one in copper
I have heard they are quite nice.
I had a poly dat trigger from overwatch precision trigger for 19 gen 4. Had to remove it. The trigger is thinner at the top where the trigger pins sits. When I’d engage my slide lock lever it would slide the trigger pin slightly out of the slide. Do the slide release having more wiggle room in that space. I chalked it up to my frames tolerances being loose. Then after a month of not carrying it. I took the trigger out and compared it with the stock oem trigger. Installed the oem back in and everything is back to normal. Don’t know if anyone has had the same problem. But I definitely will not be putting it back in my pistol. I do however have one for my gen 5 19 and 48 and have 0 problems. But with the 19 gen 4 i don’t understand why they’d change the dimensions of the shoe itself.
I just learned there has been a re design apparently of the shoe to make it usable on all generations . That is the issue I think you are talking about all of mine are previous to the change.
@@TacticalConsiderations most likely what it is. Mine was made for i think all gen 1-4
@@ohiojake5077 If it was made for gen 1-4, you wouldn’t have the problem then. I don’t understand
I wonder if any have failed or would you run an after market trigger in a Duty or carry pistol
Hey Mike I’m thinking about doing the Overwatch polydat drop in system. Are you running the OP trigger bar or the polished Glock trigger bar? Would be my first drop in aftermarket system. I put my g26 together from buying a frame, Glock lower parts kit etc. just kinda hate the trigger shoe and safety with a passion but want a better trigger all around. Figured if I went that route might as well do a full upgrade. Long question short lol, full polydat drop in kit good to go?
I ran the np3 but the polish is just as good.
Thanks man!
Seems like I’m having a hard time finding a trigger for a glock 29 10mm Gen 3? If the trigger say it fits say gen 3-4 will it work? Sorry new to upgrades.
The large frame stuff should but many stopped making them since they didn't sell well.
I was looking into replacing the trigger in my Glock 19 GEN 5. Primarily due to the fact, I don’t like the factory trigger shoe and safety blade. I’m not interested in reducing the trigger pull, it’s more about the comfort. I was looking at the Apex trigger shoe, but they don’t just make the trigger shoe replacement for the Gen 5. Do you have any recommendations on just trigger shoe replacements or do I just put the old freedom Flatty in from Apex?
Overwatch and apex are the two I go to .
Is the trigger pull measurement any different if you pulled with the meter at the same speed as you would a trigger?
No it will measure the same but it can fool electronic gauges if you pull fast.
Good Information!!
Glad you think so!
ik im late to this vid but I'm a new firearm owner and was wondering if the timney was ok to EDC. i heard Some say it could go off on its own when dropped or something, but not 100% sure. Is it ok to EDC in your opinion?
No the timney is a only competition trigger.
Also wondering given the tolerances, I currently have the overwatch poly dat trigger. Should I switch over to the aluminum trigger to help with reliability?
I haven't had issues with either. I do prefer the aluminum
switching to overwatch's alluminum trigger shoe wont help the dimensional problems with their DAT trigger shoe.
Thank You for the great content
Thank you for watching and commenting I am glad you liked it.
I bought a Overwatch poly dat trigger and it came with a gen 5 trigger shoe and would not work with my gen 3. The shoe itself had a cut out on both sides of the shoe causing the trigger pin to walk out the side of the gun.
Someone had told me they were using only gen 5 shoes now in all version and that was happening.
I added a Johnny Glocks combat , with the Jvex shoe to my 19 gen5, and absolutely love it! Have you ever tried Johnny Glocks? I’m adding one to my Shadow Systems MR920.
Very solid stuff.
Great quality video n content got my sub🤙🏽
Thanks I appreciate that.
@@TacticalConsiderations based on your review I bought the timney trigger n for carry I got the apex gotta say awesome triggers🎯🤙🏽
Mike, you have way to many Glocks!!! Remember Sig (I know you do, 226, P320 P365), H&K (USP, P30, VP9), CZ (a bunch), Beretta (M9/92 at least) all deserve love! I'm thinking of sending you a digital gauge when I get my stimulus. Since you spent you budget 😢😢.
Dale I'm so cheap....$47 for the Guage its in my online cart too lol. This one just keeps rolling. Lots more stuff coming for the sig and more brother
Where can I buy the Apec trigger pull with the emblem on it? Thank you
Well they only do limited runs of that one.
What are your thoughts on the triggers in the various shadow systems ‘glocks’?
Eric its been so long since I fired one of the shadow systems that Its tough to compare .
Honestly I like my stock g23(yea) trigger after 10s of thousands of pulls.
Next would be an agency trigger but it definitely has no pretravel lol.
The agency just never did well with me . It caused a bunch of problems in factory frames, p80 but in the nomad frame it runs like a top
@@TacticalConsiderations no issues with mine.
Been looking to upgrade my g43s trigger. Which would you recommend me? Looking for a reliable edc build. Another issue is nothing is ever in stock.
Overwatch is really hard to be all around.
dimensions on the trigger are a bit too narrow and will allow side to side play in the tigger and slide release due to there being 3/16" on one side, and about 1/8" before it meets the slide release. maybe the trigger bar is worth it, but the shoe is garbage
They have changed the design
Love that battle work look on the first one on the left 😩
Its a great color .
What type of magwell do you have on the gray frame gen 5 glock?
That is SLR
Johnny flock makes a kit to make the timmey trigger more user friendly.
Yup I have a video on it.
The Timney looks like the only one I could use without throwing up in my mouth.
The PDP trigger I customized is literally better than off the shelf 1911's
The PDP is amazing.
I've had my Glock 21 since 2016 I wanted to upgrade the factory trigger what trigger do you recommend
I ran the overwatch in mine.
I have read what seems like hundreds of reviews on replacing the guide rod on a 43X, and after reading this one review, I am a little confused. I came across several reviews that machinists have stated the tungsten is a very brittle metal. If a piece was to drop on the ground, it will shatter, and the grain structure looks like sand. They mention it isn't a good material choice for firearm parts. (they say it might be SUITABLE for a competition gun, where your life isn't on the line if the part was to break) What is your take on this review. Is the solid SS the way to go? Please confuse me....
I have seen tungsten guide rods last tens of thousands of rounds.
Have a gen 3 19. Looking for lighter trigger for home defense but still reliable to where I don’t need to worry about it damaging other springs or parts in my gun?
The overwatch precision is might go to with a factory minus connector
@@TacticalConsiderations thank you sir
Just bought my first Glock. I have many Glocks, never liked the blocky grip. The G30SF ain't bad, BUT the safety blade is like a RAZOR BLADE. It has to be changed out. I heard of the Glock Knuckle, but not the Glock Finger Slicer. Who makes a wider safety blade?
check into the overwatch trigger
I see u have reviewed psa dagger. I was wondering will a p80 trigger shoe fit a psa dagger trigger bar?
Well that I don't know.. I think you'd have to replace the bar and shoe.
Trying to figure out a great trigger for my G17, G29, and G30.
I think overwatch makes one for all of them.
@@TacticalConsiderations thank you, Sir
Have you tried johnny glocks triggers ? I was an apex guy until i got his triggers. the best in my opinion
They are finishing up testing as we speak.
I researched the trigger pull gauge you used and it has been discontinued... what would be your choice if you had to replace the trigger gauge you now use? Manual or Digital = what brand?
Wheeler gauges are pretty good.
Between the manual and digital trigger pulls, which one is most accurate? Your preference? @@TacticalConsiderations
Not a glock fan. But had to check out the vid and smash the like button. Thanks for the vid, brother
I appreciate that.. Always nice to just see something different.
I love these videos 💯💯💯
Thanks Thomas.
Herd great things about the empire trigger! Have you tried this trigger and what do you think?
I have not tried the Empire.
Love my overwatch precision with 3.5 rocket ghost connector and competition spring kit. The timney wasn’t developed yet when I got my overwatch trigger so probably would have gone timney myself. That thing seems sweet
Well the overwatch is duty rated the timny is competitive trigger only
@@TacticalConsiderations yeah I’m aware. I have a spring kit mixed with my overwatch and it’s nice 👍
Totally off-topic, but have you shot the Walther PDP yet? If so, would you take a full size PDP or a Glock 17? Thx
I went to pick it up and upon inspection the slide was striped out from the factory so the store sent it a a few other back before selling any. Not off to a good start
@@TacticalConsiderations
My shop got a few in, and I noticed two things... well, three things.
1. The ppq trigger reset is better when comparing side by side.
2. The optic plate is polymer, and underneath does not have any notches so the optic plate is only held by the fastener screws and no notch to prevent any movement under recoil.
3. While there are some good points to it, it doesn’t feel like the old Walther ppq in terms of quality. Sure, this is subjective but it felt a bit “cheaper” than I expected. I hear recoil is a bit more as well, which is also subjective and not a worry of mine.
I ask because your opinions are helpful, so thank you! I have the Glock 19x, Glock 19 and Glock 45 and debating on a 17. No real reason, “just because” I guess.
Timney may have changed the game. Glad to see it. They make excellent triggers across the board. I have them in a few rifles. It still blows my mind that a Canik comes stock with a trigger probably as good as a Glock Timney trigger.
Timney has definitely put out a winner here. As for the Canik id have to borrow my buddies again to compare but it is good.
If you look around on the interwebs , there are lots of complaints with the timney. I hated mine.
@@tommymorgan9293 i was one that originally complained at first because the expectations was set SO HIGH from what I seen on UA-cam. I was expecting a 3.5 single action revolver type of pull. There is the slightest bit of creep that is only noticeable if you are putting incremental pressure on the trigger while you are dry firing. The reset is totally different than an OEM Glock reset as well. With that said I do really like the trigger and it’s far better than others I have tried. I don’t even notice the reset or any creep at all when firing the gun. I do believe it was money well spent for me. I dang near returned it at first. But I am so glad I didn’t.
I own a Canik Rival and a DR920P with a timney trigger. The Rival trigger is better especially with an Overwatch walther return spring and lightened plunger spring but the timney is damn close . A Ghost connector makes the Timney even better as well
I have the APEX and I was expecting something much more. It’s slightly better than factory, but not much. I spoiled myself making a PPQ my first pistol and now I suck with Glocks.
OH yeah PPQ is gonna ruin you for glock
Same experience
Do you know if the timney trigger fits in a p80?
I have run it in one have a video up on it.