CLUB CAR DS Resistor and Series DC to Navitas AC MOTOR AND CONTROLLER Conversion
Вставка
- Опубліковано 9 гру 2021
- #Golfcartsmodified #Navitas #ACInstall #ACconversion #clubcar #clubcards
#DCtoACconversion
CLUB CAR DS AC Conversion Naviats Vehicle Systems Custom Golf Cart Fast Golf Cart
Navitas AC
In this Install video we show you how to install a Navitas 4KW AC motor and 600 amp Controller.
We also show how to wire and install a new IQ Harness, Run/Tow switch and MZJ-400 solenoid.
This cart is a 94 Club Car Resistor cart but works for the same as the series and IQ
The Golf Carts Modified Group page is also a great source for golf cart questions and a great place to meet fellow enthusiasts.
/ golfcartsmodified
All parts can be found at
www.golfcartsmodified.com
Parts
Navitas 4KW Motor 600 amp Controller
39000 IQ Harness
MZJ - 400 Solenoid
Curtis PB8 Pedal Box
2 Awg Cable kit
Run/Tow and F&R switch
Wire Spade Connectors
Wire Eyelet Connectors
Torque Specs: Controller 7lbs
Motor 8Lbs
Remember you will need a lift to run the Bigger 5KW on the DS.
You can Reach us at
Golfcartsmodifiedsales@gmail.com
Travis Andrews
Cory Osteen
Ryan O’Rear - Авто та транспорт
Can’t thank you enough !!
Something that would have been confusing for me in parts.. you made simple.. and the pedal box fix … you’re awesome at what you do . I was dreading the swap .. but you made it simple! so thank you . And you should start selling the mounting plates .
Starting on my 03 ds club cart, I will be calling on you soon as I get into my build. Thanks for the great viedo 😎
Great video. I watched this about 3 times.
❤ great video, for the first time i now see just how easy this cab be. Get my cart cleaned and painted and I will be ordering my kit😊
Awesome video! Ordered parts today and ready to upgrade my old Marathon EZGO coil system.
Ryan, fantastic video! I watched this video and purchased the kit last week. Thanks in advance for the white and black custom cables, very professional work you do. Looking forward to getting the powerplant soon.
Keep the videos coming!
Patrick
I’m glad it helped. Anytime
How much and where can I buy this kit?
This is a great video. Cannot wait for the next one.
im so glad i found your channel. great info..well done
100k the video that got me motivated to start on my cart! Great cart and great giveaway
Great video! Dang where was this video 3 weeks ago lol took me forever to figure out the 3900 wire harness for my navitas 600amp 5kw ac conversion in my 95 CC DS. I modified the Mcor4 kit to work with it tho, fairly easy and works awesome! Just have to get the pre MCOR to MCOR4 conversion and then the "hill brake kit" and cut a little off pivot rod to fit pedal stop and reinstall factory return spring. Then you have the latest and greatest throttle controller 👍
Awesome bro. Let me know how it goes when your finished
@@Cobrardo oh I'm done it rips! 33-35mph lol
Just to confirm , will this 39000 for for the 5kw motor ? I have a 48v 105ah roypow battery , the full conversion for the 5kw Navitas including controller ect .
Loved the video can't wait to do this
Great Video, Super Duper helpful!! I Have a 1997 club car DS - Do you have a video on connecting the charger to the wiring harness? Im using the same charger port that came with the cart. I have a new charger that will work with the system.😀
Very clear and informative
Loved the video want to see more
Nice video. Good work sir.
Thanks for the video , you are making it very simple.
One question I don't see the mounting plate on the parts list. How and where do I purchase?
great video buddy
Cant wait to get my kit!
I love watching you
Great video Ryan, have one question about the Mcor on my 04 club cart ds. The color of wires coming off of my triangle plug is yellow,purple,and black. Since the wiring harness has yellow,purple,and white, does my black wire become white? Thanks!
Very well done.
Ryan, can that pb8 peddle box be placed on a 02 club car ds (series cart)48v with a 600 Altrax controller
At 33:10, your putting 2 small ring connectors on the left side of the solenoid.
Why dont you run both wires down the same flex loom and have both wires connected to 1 single ring terminal?
Then you can eliminate one of the smaller flex loom branches.
any videos about making the connections in the front? Key switch, battery light etc?
Where do you get the mounting bracket from for the controller and solenoid? It’s not available on your page so it’ll be helpful to know where to get it to complete your build.
Great video, and thank you for posting. My question is regarding the main golf cart wiring harness... Does the connector have to be rewired if I'm installing this system to a golf cart other than the club cart? I'm going from a Curtis controller which is also running an 5kw motor currently but I'm concerned that the existing golf cart wiring harness will not fit directly to the navitas controller. Would you be able to provide guidance?
I believe placing an insulator between the aluminum frame and the galvanized L bracket to stop corrosion
Will the 3900 wiring harness work on a navitas 600 dc controller with a pb 6 pedal box
We purchased this kit. If we wanted to use the battery meter what colored wires do we use the battery meter? Our meter has +, minus and C
will newer motors bolt up to older differentials and splines on the DS? i have a 93'
i have a 4 seater lifted club car ds with mcor will the 4kw 600amp work with it?
Anything I can do to increase speed of club car 2021? Was told that due to throttle change in 2021 was unable to modify it
I’m new to all this stuff I just got a freebie golf cart And I’m trying to find out some information on how I can put one of these systems on it it’s a 1983 easy go 36 V marathon golf cart trying to find out what spline it has could use some advice
What if I have an MCOR? Then I have no existing linkage for the PB8 actuator. Is there a separate kit for that?
I have 2017 ezgo txt. with 48volt lithium battery. what solenoid do I need to use when installing navidas 48 volt , 440 amp controller and 4kw motor? what is the disadvantage of using the factory solenoid?
Is there enough diameter in the large flex loom, so that I can add a 8 or 10 gauge red wire that runs from the battery box to behind the dash?
Thats where I want to install the fuse block for all of the lights and accessories that are controlled from the dashboard.
You wouldn't happen to have a harness built our for the Teekon AC kit would you? I'm in the same boat and had a resistor cart that i bought a harness for a ds that uses the black Curtis 1510 controller. I got the Teekon kit all hooked up and but the cart does not go in forward or reverse, thinking I need to jumper a wire somewhere.
I have a 04 club car DS not lifted running 25/26 mph with 4 on the cart 28mph with 2 on the cart(D&D speed motor, navitas controller 600amp solenoid and 48v 120ah big battery eagle lithium pack) I am curious if u think the 4k navitas motor upgrade is worth it. What kind of speed will I see? Thanks
I have a 1996 club cart ds with new Trojan batteries.
I’m looking to upgrade the motor and get more speed out of my golf cart what do I need.
Thanks
We’re did gu get ur harness I’m currently repairing 15 carts from a flood and I’m at the weird ones and I have one coil cart but I cannot find a harness for the navitus system
So Hey guys, I purchased a full Navitas kit for my DS from you (Golfcartsmodified) and you sent me a pb-6 that Travis modified to have the fifth wire because you said there was a shortage of pb-8s. So, I got the red and black from the switch and another red and black with an added blue wire. I gave you guys a call and sent an email to tell me what was what... nothin'. I can't be the only one, so show me (us) what's what. Good vid though.
Did you figure this out? I only have 4 wires, two red and two black
I have the same cart just 36 volt will the 48 volt work
Where do you order the mounting panel from?
Makes good sense but it didn't click until I saw this. I was trying to figure out a backup camera and I should be able to use the same tricks
Can I use a AC Curtis controller on a DC motor on a golf cart?
What controller do you recomend 600 or 440?
Great detail instruction. The only question I have is, will this kit work for a non-regen AA01 cart? I care not for Regen braking.
The controller can eliminate regen.
New to the golf cart world and you mention you don’t run rear shocks on the cart, May I ask why?
Where did you get your plate? I can't find it on your website
Is this wiring harness made by your company?
Or is this something that you found and are modifying for your use?
It seems like things like the brown wire for the OBC would never be used since DS resistor carts never had an OBC.
I need help connecting my 600 amp Navitas controller to my VGlide.
How in the world do I hook the key ignition up with the kit?
Where did you get the iq bracket?
Where can I get this exact kit, I have a 1997 day club car 36 volt resistor type cart just like the one in the video it is lifted 6 inches with 25 inch tires but it is slow 🐌 a golf cart company that sells Navitas kits said they don't make one for my cart but what you did with that cart I could do with mine same exact set up
Are you going to run 12V accessories?
I want to add a relay and fuse block that gets the 48V signal from the key switch.
What color is the key switch wire that only has 48V when the key switch is on?
There are 2 wires going up to the key switch.
One has 48V constant? The other has 48V only when the key is on.
I have a 1990 club car dc 36v I would like to put this kit in my cart or one like it can you send me something on this and where I can go to buy one and how much does this cost
Hey Ryan, great Videos! we have a 2006 Club Car DS. It's an "AQ06" serial number. I have installed the 400a Navitas conversion and wand to install the 3900 harness. This video was awesome!. Just what I needed. I want to bypass the OBC and you had mentioned you use a different charging system on your cart. Can you point me to that video? We purchased a new external 48 volt charger. It is Diversified Power International
Compatible Model villager, Carryall 1500, Carryall 300 Turf, DS, Precedent, Villager LSV
Manufacturer Part Number 1RB-48015E20-M00
It says it will not operate unless we bypass the OBC. Can you help me out on this bypass?
Thanks, Kevin
how much is the price for the whole kit to do that conversion?
Solenoid a little bit down and little bit up?
I notice that you have lots of colored heat shrink on your bench, but you dont seem to use it.
You dont put red heat shrink on the battery end of the cable.
That same cable goes to the large lug on the left of the solenoid, but you dont put red heat shrink that covers part of the cable and the crimped portion of the lug.
Your 3 cables between the controller and the motor dont have heat shrink matching the colors of the cables that connect at the motor.
Do you have a label maker? Dont you label each end of the cables U, V, and W?
Consider tapping those mounting holes and add the nut on the back.
I want to turn my Yamaha three wheeler into a EV. from an old EZGO golfcart resistor style I need to talk to you about it
Awesome video, planning on doing this conversion to my cart. Just curious what your preference/recommendation would be for batteries?? Right now looking at "6 pack 8 volt trojan T875 deep cycle" and the Dakota lithium 48 volt 96Ah battery that comes with a charger. The Dakota lithium is tempting with the 11 year warranty.
Check out eg4 WP 100ah 200a 48v
Is there a kit part number?
Where can I get that wiring harness
How much for the whole conversion kit for 1988 club car DS ?
Hi Ryan - excellent video! I love my Navitas system. Hoping you can help with a condition. With key on and set to fwd or rev, peddle pressed the solenoid does not always engage. Sometimes repressing the pedal engagss or furning off and on clears the sympton. Also, the cart bucks, loses power while driving, but this may be low battery fluid levels? That fault cleared aftee refilling above the plates. This is on a Club Car.AA0119. Thanks in advance.
Did you get an answer on that? I am seeing a similar condition.
Interesting that yesterday I replaced the MCOR4 and it solved all the problems and added so much more power. The front end comes off the ground now :-). I bought off EBay. Hope this helps.
Hi guys where can I buy the kit? Thanks
I am installing same system. My solenoid is a Curtis/Albright SW180B-1125. I don't have the 2 small lugs on this solenoid? It has spade connectors but not sure which to use?
Same thing with me. Not the same seleniod as in video
I upgraded my 97 series cart pre-mcor to an mcor-4. Will the MCOR-4 work with this kit?
Yes it will
Does anyone make the aluminum plate as a piece of flat metal that has the 90 degree bend at the top. What thickness should this be so that we can still drill holes in it? 1/8? 1/16?
Does anyone have a paper or cardboard template that I can give to a fabricator?
I’m looking to speed my cart up for the course. Would the controller itself be fine or should I just go ahead and upgrade to the kit with the motor? Forgot to mention, I have a 2001 club car DS.
2001 DS do you know if your cart is a Series cart or IQ cart?
@@GolfCartsModified I believe it’s a series. I emailed someone earlier. Showed them a picture of the cart and motor and they believed it to be a series as well
100K ❤❤❤❤❤❤❤❤
I have purchased 5kw motor with controller , charger ect …. I would like to know since I am completely rebuilding …. What lithium battery should I go with for good range(30-50miles) , great power(avg 750pd load at all times) and extreme terrain(hills , mud, ect) …
The Eco 105ah. Will get you the range you are looking for. Or the 144ah kit will get you more
Would this conversion work on a 90 club car resistor cart? I already have a 325A Curtis Controller.
Yes we have a kit for it
@@GolfCartsModified Awesome! Do you have a link or info as to where I can find this?
Thank you for the response!
At 15 min in your video you talk abouth a OVC or somthing like that for charger What is that
Why do you not run shocks on the rear? I am pulling my cart apart and saw the shocks were trash. So what would be a reason not to put new ones on?
Because they serve no purpose and actually make the cart ride rougher
I was going to ask the same question
Does the marathon POT from 89 to 94 have five wires as well?
They come stock with 4. You need the 5
@@GolfCartsModified thanks! Ordered from you guys. Believe I have the five wire coming
Where do I connect the white wire to on the pb6 pedal box?
Hello
Have a 2009 EZGo RXV... what ac conversion can I use without lifting?
RXV’s don’t have a AC conversation because most of them are already Have AC motors. You can upgrade to a 600 amp controller. That will increase speed and Torque
@@GolfCartsModified aw heck, had no idea... thanks for the information... so, even a 2009 may already have an AC motor?
@@CristianZamora yes sir
@@Cobrardo so all I need is the controller upgrade (600 amp box with know adjustment panel), and I assume a 600 amp, 48v solenoid and new cables....
I hooked up everything and got no power at all. I'm trying to figure out what is wrong. I'm glad I haven't mucked it up to the point where I fried everything.
Did you figure it out. I did the same thing
I have a 2001 club car ds with series motor, im looking to upgrade to full navitas system , what would you recommend? What system I know your website just looking for more speed and torque , my cart has 25s tires and is like a hunting cart , can you send me the link of that navitas system that will work great on my cart , please and thank you so so much!
golfcartsmodified.com/products/navitas-ac-conversion-kit-for-club-car-ds-series
I sent you the link to the kit you need.
If you have any questions give us a call Steven or myself can get you fixed up.
571-882-2787.
How much average for a kit like this?
Club Car shopping 😎🤘🏼
The price or speed lol
i bought your kit and my “curtis” pedal box says CURITS
Where can i find the same wire harness you used
Now the only problem is that with the new harness I have the same problem, no power to my controller. My controller is good because Navitas walked me through testing. It's beyond frustrating at this point. Does anyone want to buy an AC MOTOR and controller?
I'm running a Navitas 5Kw motor on my non lifted DS. I did have to lose my shocks and grind a little of the frame away. I'm going over 50MPH now.
72V lithium?
@@milesherbst2172 Yes, 72v lithium.
Where can I get that IQ plate? I don’t see it on your website
Send us a email. I’ll get them on the site
@@GolfCartsModified 👍 I need to reach out anyways about a 86 DS build I’m about to start.
I have a 00 clubcar 48v. Want to convert it to Ac. Love to pick your brain. If your a dealer I’ll order from you. Thanks
Sorry for the late response. Yes sir my phone number is on our website. www.gilfcartsmodified.com
How about what if you do have a obc
thats covered in the Precedent video
100k 😊😊😊😊😊
Need some help setting up charging
Sorry DJ I haven’t been checking my messages l. Did you still need help
Everything your throwing away has a big market for, expensive
100k
100K🤭
That's such a cheap wire loom.
100k
100k
100k