Would you recommend it? I have problem with ERG, mazda 6 , 2.2D, 2017. I am getting check engine with ERG problem. Mechanic opened it and it was clear. I got recommendation to check map sensor, then I saw your comment. I am afraid if I turn egr down that it would mess my engine.
The manifold absolute pressure sensor monitors airflow into the engine, which helps the vehicle’s computer calculate the air and fuel density levels entering the engine. So it very well could be your issue. The symptoms are many, it can cause lean or rich fuel mixture causing rough idle, poor fuel economy, slow acceleration and a strong smell of gasoline. Surging, stalling, lack of power, hesitation on acceleration, backfiring through the intake, and overheating. Unfortunately many of these symptoms could also be caused by other defects. There is a lot of information online which may help. Hope you find your problem. 🙂👍
My Mazda 2.2 d 2013 has a power delay on low RPM when I push pedal to the bodem react after 2 seconds what it can be please help me I visited the garage many Times they didn't know What is the problem thanks a lot
Hi, unfortunately it could be many things. Having a diagnostic tool scan would possibly point you in the right direction. Having said that it may possibly be the EGR (exhaust gas recirculation) valve sticking due to carbon build up, which can be cleaned to rectify the issue. Something to investigate, I hope this helps and you get your issue sorted out. 👍🙂
Hi, I’m not familiar with this fault myself but have just checked and it seems to point to a brake vacuum pump issue. If you have a search online for this code there is a lot of information. Here is one forum which talks about the issue www.mazdaforum.com/forum/mazda-cx-5-54/p258b-vacuum-pump-circuit-range-performance-45199/. This is a link to how to test the vacuum pump www.mcx5.org/vacuum_pump_inspection-870.html. I hope this helps 🙂👍
@EverydayWorkshop really good video, just what my friends car needs. I'll get that done ASAP. Wemt looking at HHO cleaning videos after this one... Thinking that walnut blasting is the best way forward tbh.
Hi, did it break off as you removed the sensor. If so you might be able to hook it out with some wire or something with a blob of grease on to stick to it. It does depend on how large a piece it is and the size of the hole. Not a good idea to start the engine as it may cause damage. There is a chance if only a small piece and being plastic it will go through the engine ok, but no guarantee, better to remove somehow. Hope you get it sorted. 👍🙂
Yeah I agree they aren’t expensive, but if there is actually nothing wrong with it except being carboned up and it is cleaned in a few minutes. Why not. Made a good video about it too. 👍🙂
Best thing to do on these is a dpf/egr delete. Did it on mine. Just the intake to clean now.
That is an option, but not necessarily recommended. Always best if you can fix the issues. 👍🙂
Would you recommend it? I have problem with ERG, mazda 6 , 2.2D, 2017. I am getting check engine with ERG problem. Mechanic opened it and it was clear. I got recommendation to check map sensor, then I saw your comment. I am afraid if I turn egr down that it would mess my engine.
What simntoms has a bad map sensor ? I have an average 7.5 fuel consumtion on my 2.2 diesel ,it is posible to be sensor fault?
The manifold absolute pressure sensor monitors airflow into the engine, which helps the vehicle’s computer calculate the air and fuel density levels entering the engine. So it very well could be your issue.
The symptoms are many, it can cause lean or rich fuel mixture causing rough idle, poor fuel economy, slow acceleration and a strong smell of gasoline. Surging, stalling, lack of power, hesitation on acceleration, backfiring through the intake, and overheating.
Unfortunately many of these symptoms could also be caused by other defects. There is a lot of information online which may help.
Hope you find your problem. 🙂👍
Dacă puteți să-mi spuneți cum aș putea să fac o revizie la. Dv.
I need to do this to my Mazda 2 1.5D. but the darn thing is hard to reach
I’m not familiar with the 1.5s, but can imagine. Hope you get it sorted. Thanks for watching. 👍🙂
My Mazda 2.2 d 2013 has a power delay on low RPM when I push pedal to the bodem react after 2 seconds what it can be please help me I visited the garage many Times they didn't know What is the problem thanks a lot
Hi, unfortunately it could be many things. Having a diagnostic tool scan would possibly point you in the right direction. Having said that it may possibly be the EGR (exhaust gas recirculation) valve sticking due to carbon build up, which can be cleaned to rectify the issue. Something to investigate, I hope this helps and you get your issue sorted out. 👍🙂
I ALSO HAVE SAME PROBLEM
KINDLY TELL ME HOW YOU SORTED OUT
Merhaba , Benim Araç Mazda CX-5 P258B -000 Code. Hatasi gösteriyor bir bilginiz var mı? Teşekkür ederim
Hi, I’m not familiar with this fault myself but have just checked and it seems to point to a brake vacuum pump issue. If you have a search online for this code there is a lot of information. Here is one forum which talks about the issue www.mazdaforum.com/forum/mazda-cx-5-54/p258b-vacuum-pump-circuit-range-performance-45199/. This is a link to how to test the vacuum pump www.mcx5.org/vacuum_pump_inspection-870.html.
I hope this helps 🙂👍
👍💪
Thank you 🙂👍
@EverydayWorkshop really good video, just what my friends car needs. I'll get that done ASAP. Wemt looking at HHO cleaning videos after this one... Thinking that walnut blasting is the best way forward tbh.
Am o Mazda cx5 4x4 din 2017 2 2 de175 de cai kf at 6 at
Hi, I’ve translated your comment but am not sure what you mean. Sorry. if you can give me a bit more information. 🙂👍
My broke and the plastic piece fell in how bad is it ?😂
Hi, did it break off as you removed the sensor. If so you might be able to hook it out with some wire or something with a blob of grease on to stick to it. It does depend on how large a piece it is and the size of the hole. Not a good idea to start the engine as it may cause damage. There is a chance if only a small piece and being plastic it will go through the engine ok, but no guarantee, better to remove somehow. Hope you get it sorted. 👍🙂
Me too. It broke very easily. The thing is that it is working and shows changes in values😂. I ordered another one and the car is working atm
Why?
A new MAP sensor is like 20-30$...
Yeah I agree they aren’t expensive, but if there is actually nothing wrong with it except being carboned up and it is cleaned in a few minutes. Why not. Made a good video about it too. 👍🙂