2017 Mercedes Benz C300 W205 Brake and Rotor Replacement
Вставка
- Опубліковано 10 лип 2024
- Tools needed
Hammer
Mallet
E-10 torx socket
T30 torx rocket
13/16 socket 1/2 drive
Ratchet 3/8
Ratchet 1/2
Torque tool
Awl or small screwdriver
Pick dental pick
Hubs had white anti-seize
Swapped brakes and rotors, rotors warped
This is how I do my brakes, please leave me any suggestion or comments - Навчання та стиль
This was great saw a few times and i ready to tackle it! Thanks bro for this vid
Good job!👍
It would help if you had compressed the piston when you removed the brake pads or even with the pads on.
Well done! Thank you!
Glad it was helpful!
Great video.
Because of warped rotors
Great job!!!!
Thanks, I follow you, amazing videos @TheFlexxGarage
Great video sir 👍🏻👌🏼
Thanks
Thank you for video , great tutorial.
Glad you liked it
good vid should add the bit where u have to tell the car to go into brake change mode
That is for the rear brakes
@@Critycal1 you are correct however merc dealership always says put it into brake changing mode for either front or rear but hear where your coming from for the parking brake ect
I would have put some locking compound on the caliper bolts. It you were to buy replacement bolts from the dealer they will have it on the bolts ready to go. I don't know the torque value is for this particular model.
Thanks for your suggestion
Did you have to reset or relearn the new sensors after removing and replacing with a new one?
No, the sensor just works, no special requirements
Can you use the caliper compression tool on both the front and rear ?
No, for the rear just use the regular caliper compression tool for single piston
Salve a tutti,ma per smontare le pastiglie anteriore bisogna agire sul computer di bordo e andare a sbloccare le pinze come succede al posteriore? Grazie
No, just remove brake fluid reservoir cap, for when pushing or closing calipers pistons fluid can return to reservoir with out pressure
What torque is the caliper bolts?
I don't know, sorry
Awesome dude. Where did you get your parts?
Parts at the dealer, but there is cheaper for the same quality parts, some tools I ordered from amazon, most I already own
👍👍🙏🙏👏👏
Brake assist is only for the rear brakes only correct?
Yes, it's brake fitment position and it's only for the rear brakes because of electric parking brake
What does the caliber adjusters do
If you are asking about the wrench or tool that is blue with black, that is a caliper compression tool, it compresses the caliper pistons back in, for when installing the new rotor and brakes all fit back in as the new part will have a bigger thickness
@@Critycal1 when you use it to push back the pistons, you can put the old brake in the caliper between the tool and the pistons, it just same your time
Did you have to enter the brake service mode or is that only for the rear brakes? Thank you
That brake fitment mode is for the rear only, front is done as normal
Thank you @@Critycal1
@@kostask4437 you are welcome
Do you have to bleed front brakes?
No, because we are not touching the bleeder screw, the fluid is being pushed back to master cylinder
@@Critycal1 Thank you
please get a high torque impact driver which will make your life easier.
I have one, but did not use it
qual é o tamanho dos discos
Disk are stock, amg line, jot sure of the size
Your old brakes did not look bad at all especially the rotors.
The rotors somehow got warped
@@Critycal1 I have same problem. warped rotors and brakes are good. = ( I am looking at buying Euro-Stop performance brake pads rotors kit. Has anyone heard good things about them?
how much torque
The car is stock, and torque is about 275