Just replaced my ignition on 04 Pilot. There is no need to chisel off both bolts. Remove the left bolt and pry up the collar with a screwdriver and it should come off of the steering column. The bolts are M10 1.25 pitch with a hex socket...available at most hardware stores. Use these in the event of a failure of your new ignition.
Is there a nut on the bottom side of the bolt that can loosened then pry that collar apart? Working replacing my 2006 Odyssey. What a pain. I’m at the point on video he’s showing the chisel.
So if you leave that computer chip Alone and just replace the cylinder you can reuse the same keys correct cause I'm having issue where I'm thinking my ignition cylinder is bad because it's not engaging or turning over .I cannot find the first of your videos For doing this
Habla español porque tu inglés no se entiende bien ..si van a hablar inglés por dios es porque lo hablan bien aquí estoy viendo el video con un amigo americano y no entiende nada
Just replaced my ignition on 04 Pilot. There is no need to chisel off both bolts. Remove the left bolt and pry up the collar with a screwdriver and it should come off of the steering column. The bolts are M10 1.25 pitch with a hex socket...available at most hardware stores. Use these in the event of a failure of your new ignition.
Hey did you replace the whole thing with your pilot
I have a pilot with problem key not turning
Is there a nut on the bottom side of the bolt that can loosened then pry that collar apart? Working replacing my 2006 Odyssey. What a pain. I’m at the point on video he’s showing the chisel.
Chingon el video, echele ganas hacer mas contenido 👍👍
So if you leave that computer chip Alone and just replace the cylinder you can reuse the same keys correct cause I'm having issue where I'm thinking my ignition cylinder is bad because it's not engaging or turning over .I cannot find the first of your videos For doing this
what size are those bolts?
So what if we need to tighten those sheered off bolts? My ignition is loose
Bring the bolts with you, go the the hardware store and have them match the size with regular screws.
My 2003 Honda pilot sterling wheel lock and key want turn what I need to do
Yo tenga 2003 with same problem how Spencer is to reemplazo
Jugadorrrr..tiene que ser en español tis videos...no tengo nada con tu ingles..pero es mejor ps para toda la gallada que te ve o sigue ps..
Muy buen video
Thank you
Very good
Thanks
Habla español porque tu inglés no se entiende bien ..si van a hablar inglés por dios es porque lo hablan bien aquí estoy viendo el video con un amigo americano y no entiende nada
Yo si le entendi y mi ingles es perfecto.
I understood him with no problem. Maybe your friend hasn't learned English yet?
go learn English yourself