2003 6.0 Powerstroke low on power. ( Part 1 )

Поділитися
Вставка
  • Опубліковано 16 кві 2022
  • This is the diagnostic video on a 2003 6.0 with low power and also crank no start when hot. I show you how to do an air leak test on the oil system to find a leak
  • Авто та транспорт

КОМЕНТАРІ • 22

  • @billjensen6216
    @billjensen6216 Рік тому

    Thank you for the information

  • @schluckowsky
    @schluckowsky Місяць тому

    Super interestng and loaded with a lot of info.
    I have the same model. Near all OK. It has the I think "P2290" and leaks a lot of oil.
    I could deal with this. But I don*t want to. Even at running I don*t get the ICP above 1800PSI. What would be Your 1st "suspect"?
    All good
    M.

  • @hossfarran6327
    @hossfarran6327 Рік тому

    Hi,
    I have inactive codes 2006 6.0 l vt365 similar to the powerstrocke. I have 4 injectors 2 from each bank. 2,8 3,5 low to hight side open. And code 335 inactive unable to build pressure. Truck fired up no problem. Idles weird. I am able to rev up but see a lot of black smoke.. Shift to drive. Zero response. No power. No rev. Unplugged ipr while engine running. Engine shut up. Did the same with icp. Engine shut off. Removed EBP sensor. Looked clean. Removed EGR valve was dirty. Cleaned. Still same issue. Any ideas?

  • @miketracy9571
    @miketracy9571 3 місяці тому

    You know alot on this truck I need to find some one that can work on my 2006. I am in m.o.

    • @cincydieselrepair6893
      @cincydieselrepair6893  3 місяці тому +1

      I don't personally know anyone in Missouri. Just make sure you find someone who truly understands these trucks and the HEUI injection system.

  • @HannibalXoner
    @HannibalXoner 2 роки тому

    I’m looking into getting an 03, issue is it lacks power big time. It was stolen twice, beat on and recovered with a bad turbo, now has a new turbo, it idles perfectly okay but had a history of misfires, if I bought it do you think I should start with some new injectors? Or should I get it looked through with a professional OBDII reader?

    • @HannibalXoner
      @HannibalXoner 2 роки тому

      I also want to mention that it revs up good just the power isn’t there when you step on it, feels very sluggish

    • @cincydieselrepair6893
      @cincydieselrepair6893  2 роки тому

      I would definitely get it looked over with a good scanner and someone who knows what they are looking at

    • @Malfypoolcreations
      @Malfypoolcreations 2 місяці тому

      I jv same issue. ? Stuck vanes or map? Wat was it for u

  • @stevenjonesll7104
    @stevenjonesll7104 Рік тому

    What's it mean if there is fuel in the oil .?

  • @pwcoon
    @pwcoon Рік тому

    I don’t understand I went to watch part 2 ( I understand the lost part of the video) but I was watching a 041/2 up oil rail being worked on???

    • @cincydieselrepair6893
      @cincydieselrepair6893  Рік тому +1

      The second part of this video and several other videos were on a phone that completely died. I just recently had someone extract the videos from the phone and I hope to be uploading them soon

  • @miketracy9571
    @miketracy9571 3 місяці тому

    What state are you in

  • @KBS117
    @KBS117 Рік тому

    And put an 04 intake back on that 03 engine..

  • @tsleepr8898
    @tsleepr8898 Рік тому

    What ever happened to part 2 ??

    • @cincydieselrepair6893
      @cincydieselrepair6893  Рік тому

      I have a few videos that I I couldn't get to load. I've been working 13 and 14 hour days for a year getting ready for a rotator cuff surgery I just had last week so I hope to have part two and the other videos loaded in the next day or so

    • @tsleepr8898
      @tsleepr8898 Рік тому +1

      @@cincydieselrepair6893 good luck with the surgery 👍

  • @stevenbrooks1243
    @stevenbrooks1243 2 роки тому

    Losing the HP pump

  • @amazingwonderwoahman5465
    @amazingwonderwoahman5465 Рік тому

    Lack of power, lack of oil pressure...